What's new
  • ICMag with help from Landrace Warden and The Vault is running a NEW contest in November! You can check it here. Prizes are seeds & forum premium access. Come join in!

OUTDOOR GROWS 2024 ANYTHING AND EVERYTHING EVERYWHERE-

Maria Sanchez

Well-known member
Day 192: 135V + 57F

Family pic

PXL_20240928_040710780.jpg


Left: two re-vegged Super Silver Sour Thai Neville girls ('Sticky' and 'Fluffy' phenos)
Mid: two seed-stock Grail Project (fast pheno) x ThaiFrican girls, plus seven tiny SSSTN 'Sticky' x ThaiFrican seed plants
Right: one re-vegged Grail Project girl (NLD pheno)
 

Old Piney

Well-known member
Any tips for harvest techniques
So I got this , I think it may have been @moose eater who gave me the idea but maybe not. I use sterilite storage bins for curing. The one's with the claps and the foam gasket work best. So I'm lazy and don't have the time to trim and jar all the weed so fast. I just dry it on the sticks and then put it in the bins sticks and all to start my cure. It works great I take my time trimming and processing and no burping all those jars, just one big bin . it really takes the stress out of harvest. I finish my cure in the bins vacuum seal in bags whenever
 
Last edited:

moose eater

Well-known member
So I got this , I think it may have been @moose eater who gave me the idea but maybe not. I use sterilite storage bins for curing. The one's with the claps and the foam gasket work best. So I'm lazy and don't have the time to trim and jar all the weed so fast. I just dry it on the sticks and then put it in the bins sticks and all to start my cure. It works great I take my time trimming and processing and no burping all those jars, just one big bin . it really takes the stress out of harvest. I finish my cure in the bins vacuum seal in bags whenever
I've used something similar to those with desiccant in the bottom and hardware cloth in frames sitting above the desiccant to dry psilocybin mushrooms, but I haven't cured weed in them.

I once used a similar set up as my mushroom 'rapid drying chamber' to remove a trace of excess moisture from buds when someone was in a rush and in from out of town, maybe 20+ years ago.
 

farmerfischer

Well-known member
So I got this , I think it may have been @moose eater who gave me the idea but maybe not. I use sterilite storage bins for curing. The one's with the claps and the foam gasket work best. So I'm lazy and don't have the time to trim and jar all the weed so fast. I just dry it on the sticks and then put it in the bins sticks and all to start my cure. It works great I take my time trimming and processing and no burping all those jars, just one big bin . it really takes the stress out of harvest. I finish my cure in the bins vacuum seal in bags whenever
A friend of mine does this same thing..
I may try it this year seeing how I've got my hands full this season..
 

pipeline

Cannabotanist
ICMag Donor
Veteran
Thanks for the tip, would make it easier. I think oxygen depletion is part of cure, but maybe its more about slowly drying out that last little bit over time, which helps keep the resin full of moisture and protected from terpene/potency loss.

High humidity until tuesday, and taking their time to dry, so going to start baking and using the stove with the house somewhat sealed up. Don't have a dehumidifier. They are above the cupboards anyway, so its warm up there. Have fans going for circulation.
 

Old Piney

Well-known member
Thanks for the tip, would make it easier. I think oxygen depletion is part of cure, but maybe its more about slowly drying out that last little bit over time, which helps keep the resin full of moisture and protected from terpene/potency loss.

High humidity until tuesday, and taking their time to dry, so going to start baking and using the stove with the house somewhat sealed up. Don't have a dehumidifier. They are above the cupboards anyway, so its warm up there. Have fans going for circulation.
As I understand it during the cure that I believe can be up to 6 months you need air but don't want it to dry out. After the cure for long term storage no oxygen is optimal .what do you use to deplete oxygen? I've heard that some people use hand warmers for dry food storage. Another technique is to displace the oxygen with nitrogen gas , that's how they store apples .
 

moose eater

Well-known member
As I understand it during the cure that I believe can be up to 6 months you need air but don't want it to dry out. After the cure for long term storage no oxygen is optimal .what do you use to deplete oxygen? I've heard that some people use hand warmers for dry food storage. Another technique is to displace the oxygen with nitrogen gas , that's how they store apples .
When mine are just right for long-term storage, I seal them in two layers of Food Saver bags, double seals at both ends, and put them into the larger upright freezer in the bottom drawer at -20 f. They will, in fact, continue curing, but very slowly.

When I vacuum the air out, I stop just shy of crushing the product with a button on an older deluxe machine that interrupts the vacuum, and another button that engages a manually activated seal.
 

pipeline

Cannabotanist
ICMag Donor
Veteran
Great idea vacuum sealing and freezing. I have been so glad to have the fresh terpenes back. The jar flower was beginning to get old and brown after losing terpenes.

That sounds right from what I have read Old Piney, thanks! Brassnwood was saying its ready after a 60 day cure for improved pain relief in his experience. I minimize oxygen by packing 3 ounces/90 grams in a quart jar, very little air left in there and helps preserve them well.

Experimented with Boveda last year and left some headspace, but I feel like its best to go ahead and pack the jar with flower and use the Boveda humidity control pack without headspace, it will just take longer for it to work.

Burping in the early part of cure is good, sounds good. Once cured, then I turn into kief using dry ice for kief infused coconut oil capsules.

The stoned mice are getting hungry again, its raining, so they are tearing it up again today. Going to harvest the rest of the garden next weekend. Hope the mice back off, they have destroyed several small plants main colas, and other branches on a couple. The seeds not only attract mice, but they promote mold because the caylex automatically dies and starts to go brow and harbor mold.
 

Bona Fortuna

Well-known member
Veteran
Hope everyone is well!
My harvest window is pushed back by a week. Near 100’s in October… It’s been unbelievably hot over here, I’m slightly envious of the rain y’all are getting on the east coast.
F60950EC-5EAC-458D-A4E5-0498AFE9A77E.jpeg

Ladies are hanging in though. A fair bit of heat stress on some of the plants, others are doing well. A decent amount of yellowing, but to be expected for this time of year. Still have quite a bit of flowering left on some of these ladies. Best of luck to everyone and happy harvesting!
40FC494D-40C3-4F53-9482-A03886AC379E.jpeg

1B338EBD-67DF-4B32-ABC8-B99FE571B115.jpeg

927918F7-2306-46DD-989F-C85ABA84BEF8.jpeg

7BF6D238-BB70-446C-A6AF-22D637E986FE.jpeg
 

Attachments

  • AF519285-B2CB-4252-BA18-47FD3F60BF30.jpeg
    AF519285-B2CB-4252-BA18-47FD3F60BF30.jpeg
    1.7 MB · Views: 35

CannaRed

Cannabinerd
I forgot to include pic of this plant. I'm not exactly sure what it is, but I think it was from f3 seeds I got from a neighbor that says she crossed two plants up the road from me and kept selecting the ones that didn't mold. She called it Blue Ridge Berry Bomb. But I'm not positive, the sun bleached the tag.
And it's molding.
I haven't grown many plants where I didn't top them at some point in the grow. I've always tried to keep them short so nobody can see them.
I love the Christmas tree structure. Also cool to see the "shoulder" branches have as big or bigger buds that the top.
I'm going out now to spray h202. It does kill mold and budrot, but Im not sure if it prevents it, because I've been having to spray every day. Two more days of rain to come.
IMG_20240929_123247812.jpg
IMG_20240929_123238745.jpg
 

flower~power

~Star~Crash~
ICMag Donor
Veteran
So I got this , I think it may have been @moose eater who gave me the idea but maybe not. I use sterilite storage bins for curing. The one's with the claps and the foam gasket work best. So I'm lazy and don't have the time to trim and jar all the weed so fast. I just dry it on the sticks and then put it in the bins sticks and all to start my cure. It works great I take my time trimming and processing and no burping all those jars, just one big bin . it really takes the stress out of harvest. I finish my cure in the bins vacuum seal in bags whenever
I use bins they are very handy. Don’t be tempted to leave it in there forever though I’ve made that mistake and it can get stale.
 

pipeline

Cannabotanist
ICMag Donor
Veteran
Looks like it will dry out so could harvest late october and dry above the cupboards again for a double cropper. Already cut the heads. Been a little mold starting here and there, was glad I cut the tops.

Thats my second grow of the year, hope it stays warm.

The green beans regrew this year, they died off almost, lost a bunch of branches, then came back. I'm eating green beans off beans I planted in the spring. String trimmed a couple times down the rows, didn't weed at all!

Gardens are looking great guys! Excellent work, enjoying the show! Looks like its going to be warm again!

1727746185458.gif


1727746213936.gif
 
Last edited:

Latest posts

Latest posts

Top