G
Guest
I just received a few cuttings from SBP 
of Mr. Burn's Shoreline and SKUD. 
THere were 11 total cuts i received which were overnighted to me. I received them unrooted and stuck in 1 inch rockwool cubes. I was instructed by my sender to remove them from the rockwool for better rooting so I followed his directions.
These cuts will be grown out in a high density SOG with 9 plants per 5 gallon container, 18 plants total in about 3 square feet, so 6 plants per square foot, under a cooltubed 150w HPS inmy dresser. My batteries are about out on my camera and i have a slow internet connection at the moment so I'll get pics of the beginning of the project out later.
look forward to harvest pics by october 10th-15th and smoke reports by october 30th.
the cuttings will be rooted and placed under the 150hps to veg for 1 week before a cut is taken off the top of each and they are flipped to 12/12.
each 5 gallon container will contain about 4 gallons and im gonna work on an auto top off for the 2 containers to keep them at good levels and so i can go away for a few days kinda thing.
the air in the cab moves through an 8x8 darkroom louver, into the cab, and through an 80cfm panasonic whisper fan to be exhausted. I need to add my carbon filter but im out of money for a few days.
the cooltube brings in air through a 4"d round darkroom louver, through an 8"lx 4"D cooltube, through about 1' of flexible heater duct, through a 4"D darkroom louver, and into the utility room, where it passes by the 150w hps ballast before it is exhausted by 2 80mm pc fans probably pushing about 20-25 cfm each.at a quiet 9 volts. I will be using the lucas formula with GH nutes, micro and bloom, with a 60 gallon airpump, one of the quiet round ones from walmart.
pics coming soon
of Mr. Burn's Shoreline and SKUD. THere were 11 total cuts i received which were overnighted to me. I received them unrooted and stuck in 1 inch rockwool cubes. I was instructed by my sender to remove them from the rockwool for better rooting so I followed his directions.These cuts will be grown out in a high density SOG with 9 plants per 5 gallon container, 18 plants total in about 3 square feet, so 6 plants per square foot, under a cooltubed 150w HPS inmy dresser. My batteries are about out on my camera and i have a slow internet connection at the moment so I'll get pics of the beginning of the project out later.
look forward to harvest pics by october 10th-15th and smoke reports by october 30th.
the cuttings will be rooted and placed under the 150hps to veg for 1 week before a cut is taken off the top of each and they are flipped to 12/12.
each 5 gallon container will contain about 4 gallons and im gonna work on an auto top off for the 2 containers to keep them at good levels and so i can go away for a few days kinda thing.
the air in the cab moves through an 8x8 darkroom louver, into the cab, and through an 80cfm panasonic whisper fan to be exhausted. I need to add my carbon filter but im out of money for a few days.
the cooltube brings in air through a 4"d round darkroom louver, through an 8"lx 4"D cooltube, through about 1' of flexible heater duct, through a 4"D darkroom louver, and into the utility room, where it passes by the 150w hps ballast before it is exhausted by 2 80mm pc fans probably pushing about 20-25 cfm each.at a quiet 9 volts. I will be using the lucas formula with GH nutes, micro and bloom, with a 60 gallon airpump, one of the quiet round ones from walmart.
pics coming soon
Last edited:
the two clones i moved to the smaller bubbler with nutes are doing great. roots are growing probably 1 inch per day but are still gettin used to the nutes and haven't kickstarted quite yet. I expect to see a jump in growth after tonight.
