Suppose to get another 2 to 4 inches of snow over night tonight. We already have gotten a couple inches already but it is melting fast. Well it was now it is icy on the roads.
-
As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.
A Guide to Fishsticks
- Thread starter unclefishstick
- Start date
its gonna get chilly here...like 40 degrees...
I was freezing at work this morning at 36 degrees. Outside of town it was below freezing. Afternoon it got to 72 degrees, and I was sweating in the plant. Then a bit later as the sun went down I was cold again.
I remember when My dad sat me down over 50 years ago and discussed climate change due to solar activity in the form of solar spots, of different types.
There is science that backs this up. And plenty of it
I remember when My dad sat me down over 50 years ago and discussed climate change due to solar activity in the form of solar spots, of different types.
There is science that backs this up. And plenty of it
Morning folks 
Chilly one here.....back from the morning walk and ready to get on some plant chores.
Chilly one here.....back from the morning walk and ready to get on some plant chores.
Well I finished roofing for the year last week end and now we have several inches of snow. Now I can start cranking out the weed.
Got me a new camera phone yesterday. I ordered it from Google and it took 19 hours to get to me. I thought that was fast since the otter box came from California and the phone came from Illinois. Paid for them at 3 PM Thursday and got them at a few minutes before 10 AM Friday.
Got me a new camera phone yesterday. I ordered it from Google and it took 19 hours to get to me. I thought that was fast since the otter box came from California and the phone came from Illinois. Paid for them at 3 PM Thursday and got them at a few minutes before 10 AM Friday.
Hoping they get em listed today. Dbj sent me a message a couple hours ago saying the tech guy would be on it today. The first 15 bins are sorted and ready to be posted.
Let's see if this link will work here.
https://www.****/community/topic/1713-fund-raiser-auction/?page=2
Nope it's blocked
New shoes for all this morning
And singing the blues for one....I hate when I screw up but it is what it is....this one took a fall a couple days ago, main stem bent...lost a lower branch and another may not make it.
this was the smaller plant to begin with.
But.....no biggie as the main purpose of this run is to do an open pollination for backup seed stock before selecting males and females for selective breeding...if I happen to get both as none are showing sex yet. I think these are worthy of putting in some effort into.
And singing the blues for one....I hate when I screw up but it is what it is....this one took a fall a couple days ago, main stem bent...lost a lower branch and another may not make it.
this was the smaller plant to begin with.But.....no biggie as the main purpose of this run is to do an open pollination for backup seed stock before selecting males and females for selective breeding...if I happen to get both as none are showing sex yet. I think these are worthy of putting in some effort into.
Hey unregistered, how u like the permaclone collars? I normally use rockwool, but As a backup cloner (an to run larger amounts) i started to use my ezcloner again. this time running pool shock(calcium hypochlorite) in it. 4 days so far an no mush stem, which is better then any prior 100 tries.
if they dont mush up i may have to invest in those collars. whats your thoughts on them?
if they dont mush up i may have to invest in those collars. whats your thoughts on them?
Cbd strains
Cbd strains
There’s an ICmember here in the SD area who specializes in breeding CBD strains. His tag is ECTraveler. On IG it’s @medtreeseeds. He typically has a broad array of options, 1:1, 1:2, 1:3, etc. I’ve talked with him at a few of the pub meet and greets the SD folks have. He is a great guy, very low key and generous with his knowledge about the different cbd categories.
He has won a lot of awards for his AC/DC x GSC, including this first place in a Cannabis Cup in 2017:
https://www.icmag.com/ic/showpost.php?p=7915239&postcount=4881
Cbd strains
There’s an ICmember here in the SD area who specializes in breeding CBD strains. His tag is ECTraveler. On IG it’s @medtreeseeds. He typically has a broad array of options, 1:1, 1:2, 1:3, etc. I’ve talked with him at a few of the pub meet and greets the SD folks have. He is a great guy, very low key and generous with his knowledge about the different cbd categories.
He has won a lot of awards for his AC/DC x GSC, including this first place in a Cannabis Cup in 2017:
https://www.icmag.com/ic/showpost.php?p=7915239&postcount=4881
as i said yesterday,i'm looking for high cbd with less than 2% thc...and possibly needing to find seeds by the pound since in the long term it will be an outdoor project...i will find out more info tomorrow...
New shoes for all this morning
View Image
And singing the blues for one....I hate when I screw up but it is what it is....this one took a fall a couple days ago, main stem bent...lost a lower branch and another may not make it.
View Image
But.....no biggie as the main purpose of this run is to do an open pollination for backup seed stock before selecting males and females for selective breeding...if I happen to get both as none are showing sex yet. I think these are worthy of putting in some effort into.
View Image
I use painters tape to make a splint when ever I damage a stem. I just fold it over the stem instead of it being wrap all around like the stem. When you fold the tape over, the stem will be able to still grow and not have the stem restricted from the splint.
My bad. Was more trying to suggest a knowledgeable resource option if you didn’t get the information you were looking for.
mornin campers...and never mind about the cbd seeds,i just did a google search and of course it was that simple...it was dumb of me to assume my buddy had done something as obvious as that...
anyway...
chilly this morning,forecast has a night dropping down into the upper 20's so looks like our first hard freeze is a bit early this year...think it's gavita time finally! should be pretty straightforward to get them up and running,just need to move one pair of lamps and the ductwork for them...should only take like an hour to move lamps,hang the gavitas,and do another cleaning...already have enough plants to fill the space...
Last edited:
yea ive got several hi CBD/hemp seeds an several high cbd/thc seeds + i have my cut of gorilla tonic#3 [gg4xc99 xcannatonic ]
i also made some seede with GT#3 & pck & lgb if anyone is instered
that one looks almost like a dubble stemNew shoes for all this morning
View Image
And singing the blues for one....I hate when I screw up but it is what it is....this one took a fall a couple days ago, main stem bent...lost a lower branch and another may not make it.
View Image
But.....no biggie as the main purpose of this run is to do an open pollination for backup seed stock before selecting males and females for selective breeding...if I happen to get both as none are showing sex yet. I think these are worthy of putting in some effort into.
View Image
My older kid was working on a hemp farm up north. If you want full on CBD, that is the best for that.
If you want some sweet tasty buds.........
This lebanese strain consistently produces CBD quantities between 6 and 16%.
ACE Seeds offers you another gem of the cannabis world, a essential traditional hash plant, that should be present in any landrace lovers' seed collection.
Type: LANDRACE STRAIN (P3)
Format: Standard
Sativa / Indica ratio: 100 % sativa
THC: 0.5-8 %
CBD: 6-16 %
CBG: Below 0.2 %
I grew 5 Lebs. Here is one ready to trim and jar
See the plant hanging behind and to the right? That is a Sour Dubble x Maple Leaf Indica. I wasn't impressed with Maple leaf, and even threw some away, but this cross may be a very good one. It has a S dub gas odor, with a fresh cracked black pepper over the top. The flavors that come out in cannabis never cease to amaze me
If you want some sweet tasty buds.........
This lebanese strain consistently produces CBD quantities between 6 and 16%.
ACE Seeds offers you another gem of the cannabis world, a essential traditional hash plant, that should be present in any landrace lovers' seed collection.
Type: LANDRACE STRAIN (P3)
Format: Standard
Sativa / Indica ratio: 100 % sativa
THC: 0.5-8 %
CBD: 6-16 %
CBG: Below 0.2 %
I grew 5 Lebs. Here is one ready to trim and jar
See the plant hanging behind and to the right? That is a Sour Dubble x Maple Leaf Indica. I wasn't impressed with Maple leaf, and even threw some away, but this cross may be a very good one. It has a S dub gas odor, with a fresh cracked black pepper over the top. The flavors that come out in cannabis never cease to amaze me
I only have 1 high CBD strain made by twisty treat.
Charlotte's web x Creamsicle..
There are a few people that sale bulk hemp seeds on IG.
Charlotte's web x Creamsicle..
There are a few people that sale bulk hemp seeds on IG.
Great investment....I wont ever have to buy disposables again. @$2/each and nothing goes into the landfill as with the throw away ones.
They have a new blog on the website with some tweaks to their propagation technique, it is a good read.
My cloner holds 24 at a time....so if buying disposables @ .32 each makes it $7.68 a run. So after 7 runs I started saving money.
Latest posts
-
Legal Dutch weed experiment – discussions and reviews!'
- Latest: Orange's Greenhouse
-
-
-
Latest posts
-
Legal Dutch weed experiment – discussions and reviews!'
- Latest: Orange's Greenhouse
-
-
-
