What's new
  • As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.

trying for 15lbs

hunterwoundedft

Active member
when using AN's Fulvic as a ph down it is going to be most effective when used in combonation w/ some PH down unless u have a small reseviour. a grow this size would use a couple gallons of fulvic a week if it was all i used for ph down. so instead i add about 1/2 a liter of fulvic to get the ph on the down swing and then bring it to the desired ph w/ some PH Down. i do this for 3 reasons, 1- fulvic acid is used up the first few times it is ebb flowed into the tables when recirculating. by all rights u could be adding fuvlic acid everyday in order to make sure ur nutrients have plenty of it around so that they can work together like they r supposed to. so by adding fulvic everytime u ph down u r adding something bennificial to the plants. 2- like i said b4 fulvic acid gets a little pricey when used as a stand alone PH down because large amounts r needed. 3- u cannot over do fulvic like u can ph down. over periods of time adding ph down starts to add up as PPM and the ph down itself has no bennificial effects to the plants like fulvic does and can build up enough to hurt the plants.

Barricade as a ph up is another story, Potassium Silicate is bennificial to the plants in many ways including building plant resistance to drought, pests and pathogens. it is also is a very effective as a ph down. the PH of barricade is 11, so small amounts quikly raise the ph. i generally fill a cup w/ warm water and add an amount of Barricade to it, mix it well and use that to adjust the ph of my nutrient solution. i will never use anything else as a PH up. Barricade is a stand alone PH up,it is very effective as a ph up, it is very bennificial to the plants and will not harm the plants if u accidentally add to much.

i am not foliar feeding ANs Vitaboost Pro. when i feel i need to folirar feed to reduce stress in the plants i still use ANs B52 because it is the most effect stress reliever on the market. the reason i am using Vitaboost Pro in this system rather then B52 or Organic B is because i am keeping these reseviours as close to a "true" hydropoinc solution as possible. when i am done adding all my nutes i want my solution clear and sedement free. although B52 is a superiour product the Vitaboost does its job very well also. the bottle next to the vitaboost is ANs HyOx.

***i have been foliar feeding these plants w/ B52, CBB and Scorpion Juice. i always foliar feed my clones and tranplants w/ 3mls B52 per liter of water to reduce shock and stress. i use the CBB at 5mls per liter once the transplants r established every few days untill the end of the first week of flower and i use Scorpion Juice 1x a week untill week 2 of flower.

i add the HyOx first and make sure it is well mixed b4 adding my nutrients. the HyOx does not effect any of my nutrients because like i said b4 this is a "true" hydroponic nutrient soltuion. if i was adding alot of organics then the hyox would be somewhat harmful in the large amounts i have been adding it.

this is my first time using Connie. b4 i used the Connie on this run i spoke w/ a number of top growers that had already used it including Petfish, THMF and others. i decided it would be most effective used w/ all the other products i decided to add. the first 2 weeks i went half strength because i was unsire what the effects would be. after the first 2 weeks i found that not only did my plants not burn from it but they were exploding w/ growth like i have never seen b4 so i have gone full strength ever since.

i ebb and flow untill the tables fill then i drain and i am currently flooding 3xs a day but i think i will drop that to 2xs a day about week 6.
 

hunterwoundedft

Active member
berryhill said:
Have too slow down sometimes to evaluate what else is happening, besides makeing it happen.
indeed. sometimes it is nice to be able to relax and watch things happen rather then being what is happening.
thanks for the compliments BH!!!!
 

RamCTD1027

Member
57-

you have me interested in running AN's Fulvic now. How would you recommend running it in a recirc DWC setup with a 50 gal res? Thanks for the help.

RamCTD
 
B

berryhill

57

57

Reading in earlier post in regards to useing hydrogen peroxide. On hand I have 3% Hydrogen Peroxide with a potential fungus issue in 2 of my bubble cloners (Gro-Clonres) which carry 2 gallons of water. Would it be practical to use this Peroxide 3%, for stopping this? If so, at what amounts would you recommend 57? At present, I use only spring water in my cloners with good results. Thanks man for your help 57! Best of B.H.
 

toohighmf

Well-known member
Veteran
How much 3% do you have?

How much 3% do you have?

3% would be diluted ready for use. you would need at least 500ml of 3% and you can add it straight to the 2 gallon res w/o diluting. Do you or your girlfriend have any 35% hair bleach? for about 2 bucks you can dilute a package down to a gallon to get it back up to true 35%.
 
G

Guest

toohighmf said:
3% would be diluted ready for use. you would need at least 500ml of 3% and you can add it straight to the 2 gallon res w/o diluting. Do you or your girlfriend have any 35% hair bleach? for about 2 bucks you can dilute a package down to a gallon to get it back up to true 35%.

thanks for the h2o2 knowledge, i will be using your recommendation if i come across this situation. btw, i emailed your hotmail about an order but didn't get a response back. whats the best way to contact you?
 

hunterwoundedft

Active member
RamCTD1027 said:
57-you have me interested in running AN's Fulvic now. How would you recommend running it in a recirc DWC setup with a 50 gal res? Thanks for the help.
RamCTD
when using fulvic it is best to use it each time u change ur res at a specific rate. for a 50gallon res i would est. about 200mls. if ur ph is high u can continue to add fulvic to bring it down to 5.6. then of course during the week to bring the ph down

THMF, thanks for answering that question!!!!
 

hunterwoundedft

Active member
week 1 of flower

week 1 of flower

week 1 i am using the following chart and adding the products in this order

H202-1L
Connie A and B each-300mls
Fulvic Acid- 320mls
Vitaboost pro-0mls
barricade-30mls
Carboload-100grams
Bud Blood-140grams

as u can see there is definitely not anymore root rot. the growth rates from the Connie r crazy!










 
G

Guest

nice

nice

shit looks slammin' bro. always a good showman you are sir.

hope everything else in your life is going equally as good, no rot on the up and up and all that good shit.

doin' the thing.

nice brother.

cb

(BTW is that vitaboost truly a 0 or is that a mistype)
 
B

berryhill

Rockem!

Rockem!

Thanks big time Toohigh.....just dumped it in man! Hunter, this is off the chain, hook and wall! Nice to see a super recovery and carrying on. Again, thanks for your time for such valuable info. Keepem rockin, cause I know you will! Peace B.H.
 
G

Guest

hunterwoundedft said:
week 1 i am using the following chart and adding the products in this order

H202-1L
Connie A and B each-300mls
Fulvic Acid- 320mls
Vitaboost pro-0mls
barricade-30mls
Carboload-100grams
Bud Blood-140grams

as u can see there is definitely not anymore root rot. the growth rates from the Connie r crazy!

an suggests that you use barricade last when mixing nutes. have you had any issues mixing it in before carboload and budblood? do you dilute it water first or add it straight to the reservoir? so the conni is worth the money?
 
G

Guest

hey toohigh, thanks for the pm, but my pm's are disabled til i reach 50 posts. icmag got some crazy rules...
 

RamCTD1027

Member
Thanks for the info. Definitely gonna start using the fulvic acid.

I remember reading somewhere not to use carboload until week 4 of 12/12...I think in one of blazeoneup's threads...you recommend starting week 1 of 12/12??
 
G

Guest

Straight from AN's site:

Q. Can I use Carbo Load during the vegetative stage?

Yes, Carbo Load can be used throughout the entire growth cycle of the plant.
 

hunterwoundedft

Active member
casualsmoke said:
an suggests that you use barricade last when mixing nutes. have you had any issues mixing it in before carboload and budblood? do you dilute it water first or add it straight to the reservoir? so the conni is worth the money?
the main reason barricade is to be added last is to adjust the PH. but actually that was a typo. i actually do add barricade last and i always predilute it preferably w/ warm water.

i do not add hormones and vitamines during the first 2 weeks of flower while the plants r stretching. not sure what it is but either the Bvits or the hormones reduce stretch and w/ these strains i need all the stretch i can get.

the carboload cause no trouble in my res. i do use the powder and to be honest i just dump the powder in the res. i have found that the powder disolves itself over the course of the week. i have never found left over carbo load in my reserviours.

really i agree i should not be using carbo load so early in this grow considering this is a "true" hydro grow and there r no benis. but i am used to using benis so it kinda slipped my mind. thanks for reminding me. i agree that starting carbo load about week 3 is best when not using bennificail organisms
 
Last edited:
N

Neptune

57, looking good buddy. one of my tables last crop was the kGDP, and I used VHO in veg/early bloom which really did STRETCH them out quite a bit, I am curious if you are getting a noticable stretch with the conni, and if this is desireable for GDP? I found that I did not get Colas with stretched stems from the VHO, just lots of little nuglets on the sides of branches, and maybe a 2-3 inch top cola.

I think the stretched out GDP's hurt my yeild, honestly. what do you think?
I guess we'll see in the end, ey? :)

Looks killer.
 
Top