ICMag with help from Landrace Warden and The Vault is running a NEW contest in November! You can check it here.
Prizes are seeds & forum premium access. Come join in!
call them like i did, Lasco 800.394.3267 ask for tech support and give them the model 655702 number and wait for them to tell you. the numbers are open room numbers no load on the fan and certainly no modding/ducting of it. theres no way to tell output after modding but its probably closer to the numbers you posted.
cool tube? ambient temps? ducting size, bends? too many questions, it cools 2 1ks in one setup but cant cool 400w in another. its all in how you do it.
the dopest>>> in the process of putting the cab together, so i have no specs yet. looking for advice on getting it to work. dont care what i gotta do to get it to, got some pointers for me? i take it the best way would be a cool tube, with the least bit of ducting and bends possible right? thanks so much.
Can I use one of these to air cool 2000W? If not, what about 1000W? It would be about 10' if duct.. I have a can-fan and scrubber for the room, but just need something for the hoods..
Would the stanley be good enough to cool my flower room to be? My A/C will be in my Veg room next to the flower room. I was thinking of venting straight thru the wall the the cooler air in veg area.
i went with two 6"x12" vents in a cab roughly the same size cab and it stays just above ambient room temps in the cab. 400w hps and a bake around cool tube 4" duct in and 6" out.
sophet vent covers from home depot, i used four...one inside and out of each hole in the cab. its not light prooof but it helps a lil and really lets the air in. my setup is above the vents so theres no light interference with the plants
Dopest - thanks for the quick reply! What your using is exactly what I had in mind. So I should be good to go with something like what you've got there? Cool!