-
ICMag with help from Phlizon, Landrace Warden and The Vault is running a NEW contest for Christmas! You can check it here. Prizes are: full spectrum led light, seeds & forum premium access. Come join in!
G
Guest
Dimebag Hey bro...no worries man, I knew you'd be by. I'm sure you've got your hands full trimming and smoking right now! 
Btw, BIG thanks for posting all those SD pics for me....you're the coolest! 
blackone We are getting close on the room. In fact, the room is DONE!!!! On to the update!
So, the room is indeed complete! After a total remodel, this place is ready for construction of a different kind.....the grow system! Over the next week I'll be insulating and drywalling the laundry wall and then we'll cut the holes for ducting to pass through, set the chiller, scrubber, fan, etc. and get the system in the room built.
Here are some finished shots of the room. If I were a plant, this would be a great place to live. Check it out:
Here's a series of shots from all four corners to give a good look at the room:
One.
Two.
Three.
Four.
Wow, I can count! Here's about the cleanest window a/c installation you'll see:
Here's a shot of the actual floor space:
Btw, BIG thanks for posting all those SD pics for me....you're the coolest! blackone We are getting close on the room. In fact, the room is DONE!!!! On to the update!
So, the room is indeed complete! After a total remodel, this place is ready for construction of a different kind.....the grow system! Over the next week I'll be insulating and drywalling the laundry wall and then we'll cut the holes for ducting to pass through, set the chiller, scrubber, fan, etc. and get the system in the room built.
Here are some finished shots of the room. If I were a plant, this would be a great place to live. Check it out:
Here's a series of shots from all four corners to give a good look at the room:
One.
Two.
Three.
Four.
Wow, I can count! Here's about the cleanest window a/c installation you'll see:
Here's a shot of the actual floor space:
outame 2
Active member
Room is looking tight man.Today is me birthday,gonna go to golden corral to have dinner,fire up the last bowl of blueberry,and watch a movie.Sounds like a good birthday to me.The Haze is at day 45,so she is pretty much in the bag for Christmas.I'll be watching for the rest of the room to unfold.
G
Guest
Ahh!! Happy birthday man! The blueberry should make a nice treat for a birthday smoke. I'm toking down on my last shreds of BB hash out of my new ghetto tumbler. Looks like the thaze is starting to really put on the weight now. I'm hoping to get lights running fast so we can veg these girls up, get some clones and get rockin!
hell yea S2D the room looks awesome dude
I cant wait till i get to see the whole setup going strong. Im confident that your ladies are gonna love their new Home. You did a kick ass job buddy. One of the best. Peace budd.
-N.Kron
I cant wait till i get to see the whole setup going strong. Im confident that your ladies are gonna love their new Home. You did a kick ass job buddy. One of the best. Peace budd.-N.Kron
God, I'm so jealous. One day I'll have that much room...one day...
Can't wait to see if full of plants though! Very nice work...
Can't wait to see if full of plants though! Very nice work...
G
Guest
NothernKronic Thanks for the props man. Feels good when people like your work...I worked hard on this. Finishing/painting is my profession, and this would go a lot faster without my recent health issues, but I still turn out a nice product I think. Definitely much more of a challenge than I thought....but I'm just not on par with where I should be right now. Hoping to remedy some of these issues soon. Thanks again man!
Elevator Man Hey buddy! Glad to see you poppin' in over here, but we both know I should be the jealous one. Your thread is definitely one of my favs and I'm betting you've got more bud on hand to make it to another harves than me, lol!
Elevator Man Hey buddy! Glad to see you poppin' in over here, but we both know I should be the jealous one. Your thread is definitely one of my favs and I'm betting you've got more bud on hand to make it to another harves than me, lol!
S2D - I should just get there I think. My outdoor plants were small, but they produced enough for me not to have to buy anything for about a month, by which time the first Grape Krush should be ready.
Mind you, I still have a good five-inch chunk of one of these to get through too...they just don't seem to go away at the moment, and even stronger than last year's batch...
Mind you, I still have a good five-inch chunk of one of these to get through too...they just don't seem to go away at the moment, and even stronger than last year's batch...
G
Guest
<in best Cheech voice> Hey man, I know that shit man. That's that tied stick man!! 
G
Guest
Well, I should have the last pieces of pipe and stuff tomorrow!! W00t. I'll get the system built in a few days and the lights hung. Check for light leaks, and I'll get these plants in there vegging so we can sex em.
Here's a pic of the girls (or boys if they have to be, lol) as they are now. Little leaf damage, but I did that with bug spray. Not taking any chances, I fried a few leaves. Not even a bump in the road for me though. I have a hard time killing cannabis.
Figured I'd put up a couple pics. I'm going to trim them some and top all of em so we can get some clones growing on there.
Here's the SD IBL. All pretty uniform, one just a tad stretchier.
Here's the G13xSD. These are very short and squat, minus one that's stretched like all hell. Not all four are exactly uniform, so hopefully I get a couple phenos to choose from on females here.
Bah....I'll update later when the galleries are working right again. Can't upload squat!!
Here's a pic of the girls (or boys if they have to be, lol) as they are now. Little leaf damage, but I did that with bug spray. Not taking any chances, I fried a few leaves. Not even a bump in the road for me though. I have a hard time killing cannabis.
Figured I'd put up a couple pics. I'm going to trim them some and top all of em so we can get some clones growing on there.
Here's the SD IBL. All pretty uniform, one just a tad stretchier.
Here's the G13xSD. These are very short and squat, minus one that's stretched like all hell. Not all four are exactly uniform, so hopefully I get a couple phenos to choose from on females here.
Bah....I'll update later when the galleries are working right again. Can't upload squat!!
I have seen many plants bite the dust....The G13 cross sounds promising....This should be a smooth run.....keep up the good work!
MushuHappiness
Member
Rooms lookin great dude! Glad to see you've got some started... I'll be keeping a close eye on this G'luck dude
G'luck dude
G
Guest
Ok....got tired of waiting on IC to fix the pic upload issue. Here's a shot of the plants. Just waiting on them to show sex. Both strains smelling danky already, can't wait to flower these! 
SD IBL
These are rather uniform with one stretching a tad more than the other two.
G13xSD
One really stretched out of these and got her leaves into the fan already. The others are pretty squat.
SD IBL
These are rather uniform with one stretching a tad more than the other two.
G13xSD
One really stretched out of these and got her leaves into the fan already. The others are pretty squat.
G
Guest
Lv the dedication dude
lookn sweet bro sweet
danktown
Member
hey s2d! good to see ya still posting shows on here since ya left tc...you should rename this thread to "flip this growroom" haha, very nice work preppin that room! cant wait to see this room in full swing, hopefully i can get some pics of my new setup as well soon as ic fixes the prob...packin a snap for you s2d! peace and healthy harvests!
G
Guest
slips Thanks man! Cannabis is sacred, the dedication is natural!
Maj.PotHead Hey buddy! :friends: If you're impressed I know I'm doing pretty good!
danktown Hey man. Long time no see! Flip this grow room, eh? That would make a great name, lol!! I'd love to see what you've got going on...I got tired of waiting on IC and put my pics on photobucket. Gives me a much larger pic in my posts, which I suppose is ok, but I don't like change. Oh well, works good for a backup!
Maj.PotHead Hey buddy! :friends: If you're impressed I know I'm doing pretty good!
danktown Hey man. Long time no see!
Flip this grow room, eh? That would make a great name, lol!! I'd love to see what you've got going on...I got tired of waiting on IC and put my pics on photobucket. Gives me a much larger pic in my posts, which I suppose is ok, but I don't like change. Oh well, works good for a backup!
G
Guest
Ok, so I'm bored waiting on all this food to cook...theo's kickin ASS in the kitchen tonight getting ready for tomorrow.
Been putterin' about in the new area. Starting to make holes and screw up my nice new walls, lol!
So, here's a little thanksgiving sneak peak at what I've been working on:
Decided 1 1/2" drain for every two buckets using the uniseals. They'll be fed with a 1/2" line each from my 245gph pump.
Here you can see the res and the two 3/4" lines for the chiller running through the wall. Hole cut for ducting, and ballast wires passed through.
Here's the 633gph Eco Plus pump to match the chiller. It will sit here and be set up inline to the chiller and right back to the res through the two 3/4" lines shown.
Here's chiller set up in laundry area.
Here are the ballasts on a shelf in the laundry. We decided not to finish this wall just yet. I'm going to hold off till I have the stuff to finish the whole laundry area.
Stay tuned....More to come!
***EDIT: Ugh...of course the walls aren't round like that. That's my damn wide angle lens so I can get more in the shot.
Been putterin' about in the new area. Starting to make holes and screw up my nice new walls, lol!
So, here's a little thanksgiving sneak peak at what I've been working on:
Decided 1 1/2" drain for every two buckets using the uniseals. They'll be fed with a 1/2" line each from my 245gph pump.
Here you can see the res and the two 3/4" lines for the chiller running through the wall. Hole cut for ducting, and ballast wires passed through.
Here's the 633gph Eco Plus pump to match the chiller. It will sit here and be set up inline to the chiller and right back to the res through the two 3/4" lines shown.
Here's chiller set up in laundry area.
Here are the ballasts on a shelf in the laundry. We decided not to finish this wall just yet. I'm going to hold off till I have the stuff to finish the whole laundry area.
Stay tuned....More to come!
***EDIT: Ugh...of course the walls aren't round like that. That's my damn wide angle lens so I can get more in the shot.
Last edited:
