T
TribalSeeds
I apologize. I didnt realize it was safe to run a 4K grow room on radioshack timers and extension cords.
just because you are using 5-6 different wall outlets (receptacles) doesn't mean you are using 5-6 different circuits.
I apologize. I didnt realize it was safe to run a 4K grow room on radioshack timers and extension cords.
you said radioshack not me these are timers meant for growing there meant for 15 amps
you should think about reworking your room to be more efficient. what's your set up like? pics? while pulling juice from different circuits, you've seen what can happen when there's a weak link.
ever thought about a flip box, or something? cut your lights in 1/2, power consumption, and heat too.
i can help ya a little with a sub panel from the washer/dryer circuit. not an electrician by trade but i know a few things lol.
ok guys now im fucked i cant get the last robertson screw out. someone please show me what to do i gotta run back to the store asap. so i just cute the ac cord in half with a razor and then go to the store and tell them to make me a custom cord? are they pretty much just making me an extension cord but one side of it is wires? i need some electrical tape too right?
can someone show me what to do the store closes in a couple hours?
Oh shit! You only have a couple of hours to get a screw out?
get a 15a plug to put on the cord.
rethink your grow room before you burn down your apartment. extension cords aren't meant for a heavy draw for 12-18 hrs a day. they are usually cheap wires, cheap insulation, and subject to breaking, or overheating during long term use.
check out the pollution factory in my sig. i'm running 2k in a 8x6 room and using 4 1k bulbs to do it. also have a dual duct 12k btu a/c in the room, and a couple floor fans.
i have a feeling you're gonna burn something down if ya don't dial back the electricity a bit or can fix the electrical set up. i've fried cords before, and thankfully i was at home, cuz it could've been very bad. since then i've decided to upgrade everything so it's right, as well as safe. not saying you're stupid or anything, but it seems ya might be in a bit over your head in terms of doing this safely and more efficiently.
your saying home depot will make me the 15 amp cord? if so can you give me directiona on what to do after i buy it? will the cord have the 3 prong plug attached to it already?
they do have some ready made wires with plugs and bare ends, but they are more expensive than making one. are you wiring this directly to the a/c? splicing the wires? or just installing a plug? you have an option to do 1 of the 3 but some are safer than others.
at this point you have a 10 ga. extension cord, and a cord that the plug has been cut off of right?
they do sale appliance extension cords, that are made for higher watts and amps if an extension cord is a must. Next time feel the cord every now and then and feel how hot it gets.
Your having a hard time because your plug is all melted and your useing a drill for a job that should only need a screwdriver, its called a robertson and its an industry standard for electrical shit.dont know what that is? these fuckin screws are hard as shit to get out gotta charge my drill again. if i cant get this last screw out im fucked! whoever invented these type of screws is a dickhead