Hey ICMAG, Whats up? So I finally descided to post my growroom today. I borrowed a digi so i can show some pics!!!
Here is what ive done over the last few weeks---
Started plants from seed about the begining of April.
I used 6 NYCDxC99 seeds i had from a friend-
And a few bag seeds i had from some pretty tasty stuff!!!
I still have 3 of the NYCDxC99 as 1 didnt pop and the other 2 were mutant and not doing well.
My 6 other plants are from the bagseed.
There are in veg under 3 75w floros (1 light for every 3 plants)
Currently the are potted in 8" pots with MG Organic Potting Mix
Im waiting untill they have 7 nodes to put them under 12/12 -- Is this too long to wait or too soon?
Once i've ridded the room of all males ill be repotting the fems in 3 gal. square buckets...This time ill be using a a mix of Fox Farm Ocean Forest and ProMix(BX i think) instead of the MG.
The plants will be under a 400w HPS for flower!! Which will be mounted to a frame I built over the tub using 3/4" plywood and 18" 2x4 for the legs
Food/Nutes-
Currently im using 1/2 Tspn of FF Grow Big per gal, and will work them up as needed.
For flowering ill be using Tiger Bloom
Venting/Scrubbing--
Room is sealed off at door and window for light leaks-
Intake is a passive intake at the base of door
I have a darkroom louver installed- Props go out to Icough2getoff for this idea!!
http://www.icmag.com/ic/showthread.php?t=56132
http://www.shop.com/op/~Adorama_Dar...rs,_8_X8_-prod-22031579-29895818?sourceid=298
Outtake will be a Stanley Blower mod...Which im still working on....Blower will be set up in the attic pulling air from the room and venting it into the attic....
I also have a wall mounted air circulation fan moving air around plants and hps to cut down on heat.
Scrubber-- 4lbs of carbon with 200cfm fan-- Not sure if its really rated at this amount but thats what the seller stated... Ive tested it out and it works well!!!
Here are some current pics of the grow room......
This is what the room looked like before i modded--
NYCDxC99 about a week old--
Room Shots --
Plant Shots---
Close up NYCDxC99
Thats about it for now--- More pics will be up later next week---
By that time ill have the new door installed as well at the outtake system set up and running
I'm open for any ideas and critisizm....Please let me know what you think so far....Im a newbie, so help me correct my mistakes and learn from them
Hope this turns out to be a good thread........
Pease out,
Stank
Here is what ive done over the last few weeks---
Started plants from seed about the begining of April.
I used 6 NYCDxC99 seeds i had from a friend-
And a few bag seeds i had from some pretty tasty stuff!!!
I still have 3 of the NYCDxC99 as 1 didnt pop and the other 2 were mutant and not doing well.
My 6 other plants are from the bagseed.
There are in veg under 3 75w floros (1 light for every 3 plants)
Currently the are potted in 8" pots with MG Organic Potting Mix
Im waiting untill they have 7 nodes to put them under 12/12 -- Is this too long to wait or too soon?
Once i've ridded the room of all males ill be repotting the fems in 3 gal. square buckets...This time ill be using a a mix of Fox Farm Ocean Forest and ProMix(BX i think) instead of the MG.
The plants will be under a 400w HPS for flower!! Which will be mounted to a frame I built over the tub using 3/4" plywood and 18" 2x4 for the legs
Food/Nutes-
Currently im using 1/2 Tspn of FF Grow Big per gal, and will work them up as needed.
For flowering ill be using Tiger Bloom
Venting/Scrubbing--
Room is sealed off at door and window for light leaks-
Intake is a passive intake at the base of door
I have a darkroom louver installed- Props go out to Icough2getoff for this idea!!
http://www.icmag.com/ic/showthread.php?t=56132
http://www.shop.com/op/~Adorama_Dar...rs,_8_X8_-prod-22031579-29895818?sourceid=298
Outtake will be a Stanley Blower mod...Which im still working on....Blower will be set up in the attic pulling air from the room and venting it into the attic....
I also have a wall mounted air circulation fan moving air around plants and hps to cut down on heat.
Scrubber-- 4lbs of carbon with 200cfm fan-- Not sure if its really rated at this amount but thats what the seller stated... Ive tested it out and it works well!!!
Here are some current pics of the grow room......
This is what the room looked like before i modded--
NYCDxC99 about a week old--
Room Shots --
Plant Shots---
Close up NYCDxC99
Thats about it for now--- More pics will be up later next week---
By that time ill have the new door installed as well at the outtake system set up and running
I'm open for any ideas and critisizm....Please let me know what you think so far....Im a newbie, so help me correct my mistakes and learn from them
Hope this turns out to be a good thread........
Pease out,
Stank