What's new
  • ICMag with help from Landrace Warden and The Vault is running a NEW contest in November! You can check it here. Prizes are seeds & forum premium access. Come join in!

***DrBud Takes CFL SOG to the Next Level***

PC fans are crap at sucking air through a restriction. However there are high power 120x38mm pc fans which are somewhat better than 25mm thick varieties. Also, with a CFL grow done right, temperatures shouldn't be that much of an issue, as long as you have enough airflow to keep the plants with a nice supply of co2.

There are also a few tricks you can do with pc fans to make them better for the job in hand. For a micro grow, PC fans RULE because they're so easy to work with, quiet, etc. With the correct fan setup I am sure a really good extraction array can be made with them. I wouldn't want to use them with a big shop bought carbon filter on a big HPS grow but for micro growing, I, as someone who has used PC fans against restrictions for many years reckon they're what we need. DO get the big ones though people, 8cm ones are useless for anything other than intake.

At some point in the future I am going to post a thread with my design for a decent flowing extraction system using PC fans.
 

petemoss

Active member
Maj.PotHead said:
try clonex gel or olivias clone gel, gels are better then powder as powder comes off in water gels adhears to the plant and prevent stems from dryn out keeps them wet longer.

Keeping the stems wet is not always a good thing. The owner of a hydro shop explained to me that most people put too much powder on the stems. The powder forms a damp cake around the stem and can lead to stem rot before the roots pop. he recommended a perfume atomizer to lightly dust the stem. You don't need a lot of powder.

I forget the thread, but DrBud once mentioned that he sometimes uses "willow water" to provide the rooting hormones needed. That's an old bonzai cloning technique using willow branches soaked in water. The stems are then dipped in the water just like a cloning gel. Something to try if you don't have any cloning powder or gel--and there's some willow trees nearby!
 
Last edited:

InPotiTrust

Active member
Hey Doc got any new pics of the ladies?as we would all like to see whats going on in the lab plus get this thread back on track.
 
yea i'm learning wet stems for clones are very bad, i wasn't adding enough perlite to my rooting substrate and kept losing clones to stem rot due to all the wet vermiculite, i do not use any powders or hormone
 

onweed

New member
Dr Bud - I have a cab that measures 46" X 20" X 53" inside dimensions.

A little bigger than your setup, but would it lend itself to your style of growing??

How many CF lights would you put in it??
 

DrBudGreengenes

Well-known member
Veteran
InPotiTrust said:
Hey Doc got any new pics of the ladies?as we would all like to see whats going on in the lab plus get this thread back on track.

Well it's the same ol' Thing....Here is a Pic of the Boyz Hard at work.
Grow -Cut-Dry-Smoke...... :joint:



Next two Pic's are Purple Skunk X Mango....They are a "Gift from a friend"......I'm just growin them out.... :friends:



More of the pretty Purple Flowers.....Mmmmm :respect:



Here are some "Sherry X Sour Diesel IBL".....the Man who did the cross calls her "Sherry D"....Way to go Blynx Nice cross..... :respect:









This is a pic of some gurls on the back row....




LadyG1 x Sour Diesel IBL also a lil of my Canna Bro....."Blynx's " Handywork....... :respect:
We call her "LadyD"


Some pics of my "Lower Flowering Chamber"...... :smoker:



 
Last edited:

InPotiTrust

Active member
Nice update Doc didn't even know u were running such sweet new genetics.I also see your using one big container,are u doing a flood&drain type setup?Also what happened to those Sweet Sativas?
 

Thundurkel

Just Call me Urkle!!
Veteran
Oh thats a lovely garden Dr.Bud and I have to thank you again for inspiring me to build my cab my harvest was so tasty!!!! Hey I'm working on a few strains at the moment would you like to grow some out when I get them stable??? I'm crossing Afiskan Thunder Goo(AlaskanThunderFuck x Afgooey) with Purple Urkel(the real shit from Humbolt) I think it's going to be some super frosty grape like with a hint of goo mmmmm I can't wait to get it going but yea let me know if youre interested...
 
DrBudGreengenes said:
Well it's the same ol' Thing....Here is a Pic of the Boyz Hard at work.
Grow -Cut-Dry-Smoke...... :joint:







hey doc what is up with thos spears to the right? what strain? and how do u get them to do that?


thanks for being an inspiration.


PEACE
 

Thundurkel

Just Call me Urkle!!
Veteran
Binary - To get them like that you need to find the plants sweet spot IE the right height to induce flowering and it will grow into the lovely Budsicle like those above...
 

obZen

Member
Yo! Whats Up Doc?

Finally a good overview shot of the boxes in action!

A lot "cleaner" than your old setup... but that might just be the new paint job. :joint:

Mind giving us a shot of the Daytons hooked up on the outside?



Sorry to "advertise" but - check out my thread.
I'm being forced to build a "new" cabinet.
http://www.icmag.com/ic/showthread.php?t=95839

Now Everyone, Please resume drooling over the Dr. Buds' Buds' Buds! :joint:
 
Last edited:
G

Guest

I have an easy question for DrBudGreengenes. In your original cfl thread you advised to place the oldest plants to the outside when using a 1000 HID and it appears that in your CFL grows the oldest plants are directly under the CFL's. Could you please explain?

Capt

EDIT: Only one more question.....(for now)

Due you use the same nute mix for all stages?
 
Last edited:

Thundurkel

Just Call me Urkle!!
Veteran
Hey Doc I have a question, my cab is 26 1/2" wide 17 1/2"deep and 37"tall .. I'm trying my hardest to get my box like yours are but I noticed you only have about 26 inches of height so my question is when I buy cleats should I just mount them at 24 inches and make a clone shelf above???? Also in your opinion if this was the box you had to work with how many 42 watters would you put in it???
 
Thundurkel said:
Binary - To get them like that you need to find the plants sweet spot IE the right height to induce flowering and it will grow into the lovely Budsicle like those above...


but he can't even get em all to look like that. (the staked ones in the picture)

Mountains to be climbed. i'm about to start construction of my cab. hopefully this week. i can't wait to try and achieve that.


PEACE
 
G

Guest

binaryfission said:
but he can't even get em all to look like that. (the staked ones in the picture)
PEACE


Those are reveg'd. Flower from small clones=Budsicle. Flower from reveg=bushier but higher yield.
 
hey dr we all miss you here in the thread and plan to come back? you have showed us so much and there is way more ppl that want you to stay then the few that want you gone. please stay dr
 

Thundurkel

Just Call me Urkle!!
Veteran
Oh yea buddy! But I bet that only dry's to be 3g cuz you CANT get 7g out of a 20oz bottle! lol Go Dr.Bud thats is what I call some morning inspiration :jump: :joint: :jump:
 

Latest posts

Latest posts

Top