What's new
  • ICMag with help from Landrace Warden and The Vault is running a NEW contest in November! You can check it here. Prizes are seeds & forum premium access. Come join in!

A walk through Hempy's Garden

G

Guest

Thanks Hempy!

Thanks Hempy!

I'm enjoying your tutorials and learning quite a bit as well. Very clear and concise. Nicely done and great pics!

:joint:
 

HappyHemphog

Active member
Big Buddy said:
I'm enjoying your tutorials and learning quite a bit as well. Very clear and concise. Nicely done and great pics!

:joint:

It's all about spreading the knowledge. Everyone has something to learn, and if you apply yourself, you can learn something new everyday.

The more you learn,
the more you Grow.

Hempy
 

NiteTiger

Tiger, Tiger, burning bright...
Veteran
Awesome post Happy! I'm setting up a perpetual harvest, this looks to be a great all in one reference for a perpetual.

*pulls up chair*
 

HappyHemphog

Active member
NiteTiger said:
Awesome post Happy! I'm setting up a perpetual harvest, this looks to be a great all in one reference for a perpetual.

*pulls up chair*

Welcome to my Garden NiteTiger!

Have some Reeferman Royal Hawaiian while your visiting!

 
G

Guest

Hi,

I have been following your posts and just got into the waterfarm method of growing.. I bought an 8 bucket waterfarm kit with rez.I have been having trouble with 2 thing and was hoping maybe you could help.. First where do i find the valves that you use... ? Also I plan on using a slightly elevated table made out of cinder block or cinder caps with a 2 X 10" on top and a cinder block or two under the rez with said board on top.. That way if I want to empty the rez with speed I can sump pump it out and lower it beneath the table heighth so it would backflow out of the other buckets faster.... Do you have any thoughts on that? or does that sound right?


thanks
sog
 

HappyHemphog

Active member
sog army said:
Hi,

I have been following your posts and just got into the waterfarm method of growing.. I bought an 8 bucket waterfarm kit with rez.I have been having trouble with 2 thing and was hoping maybe you could help.. First where do i find the valves that you use... ? Also I plan on using a slightly elevated table made out of cinder block or cinder caps with a 2 X 10" on top and a cinder block or two under the rez with said board on top.. That way if I want to empty the rez with speed I can sump pump it out and lower it beneath the table heighth so it would backflow out of the other buckets faster.... Do you have any thoughts on that? or does that sound right?


thanks
sog

I get my valves at Better Grow Hydro. They sell in 1/4", 1/2" and 3/4". For the buckets, use the 1/2". It fits the grommet just like the other fittings.

My units happen to be sitting on wood shelving with bricks underneath. And I primarily did it for the exact same reason you plan to.

My next modification is going to be to add a set of valves and quick-disconnect so I can hook up a pump and suck the system dry instead of using gravity. It takes WAY too long to drain 30+ gallons thru a 1/2" tube! :yoinks:

Hempy

PS: I love the Avatar sog army!
 

HappyHemphog

Active member
Hempy's From Clone to Growth

Hempy's From Clone to Growth

High! :wave:

Welcome to Hempy's From Clone To Growth Step-by-Step Pictorial

Each week I move 2 clones from the Humidome in the Nursery cabinet to the MegaGarden in the Growth cabinet. The following is a step-by-step pictorial of the process I use in my Garden.

For the following task I use these items:
~1.5l of Hydroton
1 1/2 gallon grow bag
1 5" square pot for MegaGarden

Step 1: Pick Your Clone

I usually wait for a few more roots to show, but I wanted to get this post done. As you can see, the roots are white and healthy.

Step 2: Grow Bag

I use and reuse 1/2 gallon grow bags in my MegaGarden pots. This makes removing the plant for transfer to flower as well as clean up much easier. I punch an extra set of holes (the middle pair) in the bag for better nute flow and root escape.

Step 3: Fold Grow Bag

Fold the top inch or so of the grow bag.

Step 4: Bag In My Pot

We are all used to seeing pot in a bag, but how about a bag in a pot! As you can see, the folded part of the bag brings it close to level with the sides of the pot so no light is blocked.

Step 5: Prefill Hydroton

Place 2-3 handfuls of Hydroton in the pot filling it about half-way. It should be low enough to allow the nutes to reach the rockwool cube during flood cycle.

Step 6: Clone Placement

Place the clone in the middle of the pot and backfill with Hydroton. Be sure to keep clone centered and vertical.

Step 7: Competed Clone

Here we have our potted Clone ready to go into the Growth cabinet. But wait, there's one more thing.

Step 8: Moisture Guard

When I first started up the Growth cabinet I was having a problem with the new plants drying out too much before they could get a good foothold and start to grow. I fixed the problem by covering the tops of the pots with a square of Mylar. I cut a hole in the center and a cut to the edge from the center hole.

Step 9: Place Guard

Carefully place the moisture guard around the plant like a collar. This can be removed once the Clone starts to thrive and throw new growth.

Step 10: Place Plant in MegaGarden

The plant is given a plant marker with the date it was placed in cabinet and then it's given a quick watering of plain water.

This task takes about 10 minutes to complete.

Hempy's next task: From Growth To Flower


 
S

stretchpuppy

Nice system you have going here Hempy.

Thanks for posting the link to those spare buckets. I have been using empty 5 gal's for the same thing but they are too big and I'll be glad to use something smaller. I'm going to look into these valves too. I have plans for a waterfarm scrog and they would help a ton.

BTW - does that megagarden fit inside a C13?
 

HappyHemphog

Active member
stretchpuppy said:
Nice system you have going here Hempy.

Thanks for posting the link to those spare buckets. I have been using empty 5 gal's for the same thing but they are too big and I'll be glad to use something smaller. I'm going to look into these valves too. I have plans for a waterfarm scrog and they would help a ton.

BTW - does that megagarden fit inside a C13?

Thanks!

I'm glad the links were of use. I spent a good day googling to find those. They were the only places I was sure it was the correct size bucket as well as being able to order online.

The C13 cabinet and MegaGarden were made for each other. It's a perfect fit with room to spare. If I only had room for a cab, I'd do my full cycle growing in that cab with a MegaGarden.


I've got the garden sitting on a small wooden platform because the MG was sitting on the vent holes in the back and side.

 

guineapig

Active member
Veteran
simply amazing hempy :yoinks: i'm speechless......:jawdrop:......




i guess i just wanted to emphasize this:



this is the first time here on IC i've seen someone else make these moisture guards out of mylar......i think they are quite clever.....you would be suprised at how much light they reflect upwards. You can custom-design them to fit just about any container or application. Another thing you can do is make mini-moisture guards and attach them to the thicker branches. This puts a mini-reflector effect on the primary colas and helps redirect light into the interiors of the floral clusters.

Hempy, do you prefer Hydroton to other media? Have you found anything better such as lava rocks or silica stones? I guess that's all for now....

kind regards,
your perpetual pal
guineapig :wave:
 
Last edited:

Guvnor

Active member
Pure class hempy- So glad you're over here at IcMag. We're lucky to have you.

All the best
Guv'nor
 

HappyHemphog

Active member
I've only used Hydroton and aside from it being dirty and nasty fresh out of the bag I like it. It's fairly easy to clean up and extract from root balls.

Cheers!
Hempy
 

00420

full time daddy
Veteran
guineapig said:
simply amazing hempy :yoinks: i'm speechless......:jawdrop:......




i guess i just wanted to emphasize this:



this is the first time here on IC i've seen someone else make these moisture guards out of mylar......i think they are quite clever.....you would be suprised at how much light they reflect upwards. You can custom-design them to fit just about any container or application. Another thing you can do is make mini-moisture guards and attach them to the thicker branches. This puts a mini-reflector effect on the primary colas and helps redirect light into the interiors of the floral clusters.

Hempy, do you prefer Hydroton to other media? Have you found anything better such as lava rocks or silica stones? I guess that's all for now....

kind regards,
your perpetual pal
guineapig :wave:


im working on this for the coil............. but with white n blk poly
 

guineapig

Active member
Veteran
right on 00420....white facing upwards to reflect the light and the black facing downwards so the roots will be warmer at night.....sounds like a plan.....-gp
 

00420

full time daddy
Veteran
wow

wow

i just added white n blk poly to my closet over my buckets (have not cut holes for plants yet)

but heres befor 106 deg's ( with no intake )
it droped to 90 in the day when i added it





it was at 90 then i add the poly...... & its back up to 100
 

HappyHemphog

Active member
They actually sell a product that is panda-poly pre-cut for round pots. They call 'em SunLeaves or other garbage like that. I mean, really, I can cut poly myself thank you very much!

I didn't have any poly handy, so I figured the Mylar would do.

Good thing ya don't have anything growing in there yet 00420 (I hope!), they'd COOK!

Cheers!
Hempy
 

00420

full time daddy
Veteran
HappyHemphog said:
They actually sell a product that is panda-poly pre-cut for round pots. They call 'em SunLeaves or other garbage like that. I mean, really, I can cut poly myself thank you very much!

I didn't have any poly handy, so I figured the Mylar would do.

Good thing ya don't have anything growing in there yet 00420 (I hope!), they'd COOK!

Cheers!
Hempy


ya happy im with u.... i can cut my self.......mylar is better then the poly i just dont have any n i have a 1/2 roll of the pvc....
yeah good thing...... im just now setting this room up thats why the light is on runnig is to check temps... ....
im not done with the intake/ outake yet
last yr i ran a 400mh
im uping it to a 600hps this yr so........ we will see

i think i need a bigger intake fan, & run the small dayton im using now to cool the light.....
 

HappyHemphog

Active member
00420 said:
ya happy im with u.... i can cut my self.......mylar is better then the poly i just dont have any n i have a 1/2 roll of the pvc....
yeah good thing...... im just now setting this room up thats why the light is on runnig is to check temps... ....
im not done with the intake/ outake yet
last yr i ran a 400mh
im uping it to a 600hps this yr so........ we will see

i think i need a bigger intake fan, & run the small dayton im using now to cool the light.....

I started with a borrwed 400w and WaterFarm. Now I have my own setup with 2x600w and 20 WaterFarms!

Good to see your taking your time and getting everything right before starting. I kept having to tell my partners to slow down and be patient. Now they are SO happy I did everything right and insisted on no short-cuts.

Cheers!
Hempy
 

00420

full time daddy
Veteran
HappyHemphog said:
I started with a borrwed 400w and WaterFarm. Now I have my own setup with 2x600w and 20 WaterFarms!

Good to see your taking your time and getting everything right before starting. I kept having to tell my partners to slow down and be patient. Now they are SO happy I did everything right and insisted on no short-cuts.

Cheers!
Hempy

me to........ well i payed for half the 400w then gave him sum bud for the rest out of harvast....... we are both med users.... ;)

now im up to a 600 in the closet.....
the 400 went to my brotha's house for moms.......
i have a few rooms set up! this is just extra parts laying around.....
 

Latest posts

Latest posts

Top