-
ICMag with help from Phlizon, Landrace Warden and The Vault is running a NEW contest for Christmas! You can check it here. Prizes are: full spectrum led light, seeds & forum premium access. Come join in!
THE ULTIMATE PERSONAL PROFESSIONAL HASH PRESS FOR UNDER 20 BUCKS !!
- Thread starter Pipedream
- Start date
Hey all,
Been away for a few days. Glad to see you are keeping the thread active and offering up some ideas as well. I wish I had known they made one from SS when I came up with this idea, I might of held out for it. However, $15 bucks for the amount I'll use it is hard to beat. I'm curious though, does anyone know the dimensions of the SS model?
I'll be doing a bit more pressing in the next week or so and I'll be sure to post my results. I hope you will do the same.
(edit) OK, I did a bit of research, and it turns out that the SS model is only available on-line. For now, Makin's is exclusively marketing it thru wwwpmcsupplycom (insert appropriate dots). As stated, its $49.95. Of course they do offer free shipping for orders over 50 bucks, and there is a surcharge for Alaska, Hawaii, & Canada
Regards to all, PD
Been away for a few days. Glad to see you are keeping the thread active and offering up some ideas as well. I wish I had known they made one from SS when I came up with this idea, I might of held out for it. However, $15 bucks for the amount I'll use it is hard to beat. I'm curious though, does anyone know the dimensions of the SS model?
I'll be doing a bit more pressing in the next week or so and I'll be sure to post my results. I hope you will do the same.
(edit) OK, I did a bit of research, and it turns out that the SS model is only available on-line. For now, Makin's is exclusively marketing it thru wwwpmcsupplycom (insert appropriate dots). As stated, its $49.95. Of course they do offer free shipping for orders over 50 bucks, and there is a surcharge for Alaska, Hawaii, & Canada
Regards to all, PD
Last edited:
Pipedream- The diameter is the same for both units but the stainless steel unit's barrel is about half as long as the aluminum one, 3" and 5 1/2" respectively. The stainless steel unit is the right size for pucks (don't know why anyone would want to make a 5" tootsie roll plug of hash) and it fits into a stash box compartment well.
Last edited:
Kaibe, Did you get yours online from PMC, or were you able to locate it elsewhere? What was the actual cost if different than the list of $49.95, and how about shipping if you did get it thru the mail? Have you used it yet? I'm guessing its much stronger. Any and all info is greatly appreciated.
Pipedream- Got it from PMC via USPS Priority mail. $49.95 plus$5 shipping. Got it 3 day after I ordered it online. It's well-built (thicker threads in the cap where the screw twists through); it would be hard to break by over-tightening. PMC even sent a $5 coupon for my next order, not sure if they ship out of the US.
SUNSIMULATOR+
Member
thats a nice press!!! very good ability to adapt!!!overcome !!
I'm really likeing the stainless model ...
here's some hash pucks I have made and been nibblin on back two right top are brand new. as you can see I've been doing little designs in there with some of the different molds - I hit the top with a lighter to seal a bit more and browned the teardrop one...
here's some hash pucks I have made and been nibblin on back two right top are brand new. as you can see I've been doing little designs in there with some of the different molds - I hit the top with a lighter to seal a bit more and browned the teardrop one...
a few more pics from a new puck I made today.
captain bigbud
Member
way cool got to get me one
Burmese bubblehash
burmese bubble hash puck with micky mouse imprint (it's one of the extruders)
fwiw I found that it released really easily when I put it in the freezer to cool off.
-suga
burmese bubble hash puck with micky mouse imprint (it's one of the extruders)
fwiw I found that it released really easily when I put it in the freezer to cool off.
-suga
As far as cooling & removal goes, here's what I found out and do.....
When I press, I use a "disk" or coin on both sides to act as a die. After pressing, I just screw the whole thing out with the disks still attatched to the hash puck. After letting it stand at room temp for 15 minutes or so, I just use the corner of a razor blade between the puck and the die. As soon as I push it in the tinyiest bit, it pops right off.
I finally got mine, can't wait to try it. Pipedream, this is a great idea you came up with, thanx eh!!
I AM IN NO WAY ACCUSING YOU OF THIS:ilife said:
but i know for a fact that the meat grinder is exactly the device used to adulturate roccan stuff. all over europe you get suff that tastes like it contains incense, wax, rubber [remember 'soapbar' anyone?]
it certainly is the perfect machine to use if you have a massive pile to process at once - check ilife's pictures elsewhere to see an excellent example of that!
not even the same ballpark dude. two totally different tools. first get the bags, or a sift then get the pressDa Napster said:
surely if you use ground up flowers it will not stick together [?] maybe until it dries out then ittl come apart .. i.e. not really hash
==
good find on the clay thing!!! theres another one with two threaded ends and plugs that squish your stuff in the middle... my friends called it the 'hash-stealer' cause it was damn near impossible to get the sticky out of the middle!! this one looks like it would work a treat
still.. i prefer mine un-squashed
[but i do see the point first made about storage]
Cool thread chaps, great turn on Pipedream, made my first coin hash presses in 78, I really liked the silver dollar size, but it took a major load to make a fine coin. The eagle imprint was cool.
For folks that can't run down to a store and get one, a hardware store will do. I take the various coins in my pocket and find brass or steel fittings, just a male/ female screw coupling. Just find the section and look, you can see once the parts are in front of you. Tighten with a wrench.
H
For folks that can't run down to a store and get one, a hardware store will do. I take the various coins in my pocket and find brass or steel fittings, just a male/ female screw coupling. Just find the section and look, you can see once the parts are in front of you. Tighten with a wrench.
H
