i don't try to pick things apart, kind of like sway bar links , don't want nothing loose .
-
ICMag with help from Landrace Warden and The Vault is running a NEW contest in November! You can check it here. Prizes are seeds & forum premium access. Come join in!
ReikoX's Workshop 2022
- Thread starter ReikoX
- Start date
It was tight, but at an angle so it wasn't seated correctly. Unlike my sway bar links, those are for highway driving.
I'AM glad it was'nt just my eyes .
Ha! I am growing 3 of your FAM 2019 seeds outdoor this summer. I started them inside and now they are basking in the warm spell we have here at the moment.
ReikoX
Knight of the BlackSvn
Spent a couple hours in the workshop last night. First off I chopped the four JLo F4 abominations in solo cups. These were the only four seeds to come from the failed reversal. All four were different. Two were the "willow" phenotype, one was purple.
The rest of the plants in the Subway SOG got moved over. Mimosa Cake #1 has shot passed the lights.
I culled two of the GFOG clones, and removed the other two and the Solo's Stash male. I then transplanted the two Solo's Stash female cuttings. I should have kept them under the a dome as they were wilted this morning. Hopefully they make it, if not I can still get cuts from the girls still in veg.
I transplanted the other two GFOG clones into solo cups and moved them, along with the Solo's Stash male, into the QT tent. The QT tent is on 12/12 with the two GFOG clones that I pollinated with GG4 RIL. Those should be done in a couple weeks, so hopefully before the male starts dropping pollen.
The outdoor veggie garden is doing well. The tomatoes and corn are taking off, the cucumber and watermelon are taking their sweet time.
The pepper plant is still tiny, but does have my first pepper growing.
The rest of the plants in the Subway SOG got moved over. Mimosa Cake #1 has shot passed the lights.
I culled two of the GFOG clones, and removed the other two and the Solo's Stash male. I then transplanted the two Solo's Stash female cuttings. I should have kept them under the a dome as they were wilted this morning. Hopefully they make it, if not I can still get cuts from the girls still in veg.
I transplanted the other two GFOG clones into solo cups and moved them, along with the Solo's Stash male, into the QT tent. The QT tent is on 12/12 with the two GFOG clones that I pollinated with GG4 RIL. Those should be done in a couple weeks, so hopefully before the male starts dropping pollen.
The outdoor veggie garden is doing well. The tomatoes and corn are taking off, the cucumber and watermelon are taking their sweet time.
The pepper plant is still tiny, but does have my first pepper growing.
green...obviously!
ReikoX
Knight of the BlackSvn
I threw that GG4 RIL bonsai into the quarantine tent to collect some pollen. While I was at it, I threw a couple Grass Fire OG plants in there to make a couple seeds. That was 56 days ago, and today it looks like the seeds are mostly ripe. These seeds came from a small sample from the bottom of the plant.
I went ahead and put the plants on my window sill to dry out. The plant on the right, GFOG #2, didn't like something in the QT tent. It started out with a couple splotchy leaves and has consumed most of the plant. I'm thinking it was either heat stress, or wind stress that caused the issues in that plant. The QT tent is good for stress testing, and I think I will eliminate GFOG #2 from my library after this.
I went ahead and put the plants on my window sill to dry out. The plant on the right, GFOG #2, didn't like something in the QT tent. It started out with a couple splotchy leaves and has consumed most of the plant. I'm thinking it was either heat stress, or wind stress that caused the issues in that plant. The QT tent is good for stress testing, and I think I will eliminate GFOG #2 from my library after this.
TPTuna
New member
El pinche verde foo
ReikoX
Knight of the BlackSvn
I woke up Saturday morning to two Mimosa Cake cups on their sides, so I harvested them. First up was Mimosa Cake #1 at 11 weeks from germination. This one was big, but is mostly leaf and not many trichomes, perhaps due to being shoved in a corner most of her life.
Next up was the Mimosa Cake #2. This is a decent sized plant with nice chunky buds. The buds have a decent scent and a fair amount of trichome coverage.
I wet trimmed them and will let them dry on the screen in my lung room. This will work okay, room is 72*F/55% RH. Not perfect, but it will do.
I setup a bokashi bucket to help pre-digest the plant leaves and stems before adding it to my worm bin.
Finally, I put the second layer of trellis up in the flower room. They have another week, two max to reach that second screen. Then I'll flip them to flower.
Next up was the Mimosa Cake #2. This is a decent sized plant with nice chunky buds. The buds have a decent scent and a fair amount of trichome coverage.
I wet trimmed them and will let them dry on the screen in my lung room. This will work okay, room is 72*F/55% RH. Not perfect, but it will do.
I setup a bokashi bucket to help pre-digest the plant leaves and stems before adding it to my worm bin.
Finally, I put the second layer of trellis up in the flower room. They have another week, two max to reach that second screen. Then I'll flip them to flower.
Looking awesome as always, reiko. Btw – those 3 FAM 19 autos I am growing are flowering well despite a rough start with a near decimation by leaf eaters or something. The smallest plant is coming in with purple-tinted flowers. Bonus!
ReikoX
Knight of the BlackSvn
The local weather has been cold and rainy for the last week or two, as a result my plants look very cold and tired. To confirm the room is colder than normal, I checked the logs on my Pulse Pro and sure enough, the average daytime temperature was 74.7°F instead of the 81°F the AC infinity controller was set on.
Next I checked the logs on my Niwa controller that controls the lung room environment. Everything is well within parameters there despite the changes in weather.
Finally, I checked the logs on my AC Infinity Controller 67. The temperature agrees with the temperature in the Pulse Pro, but the relative humidity is off by 5-10%. The higher humidity reading was causing the fan to run to keep it below 60% RH.
I moved the sensor so it is on top of the screen and turned the light intensity up to 100%. This seems to have helped, the plants look happier this morning and the temperature was around 81°F at mid day.
Next I checked the logs on my Niwa controller that controls the lung room environment. Everything is well within parameters there despite the changes in weather.
Finally, I checked the logs on my AC Infinity Controller 67. The temperature agrees with the temperature in the Pulse Pro, but the relative humidity is off by 5-10%. The higher humidity reading was causing the fan to run to keep it below 60% RH.
I moved the sensor so it is on top of the screen and turned the light intensity up to 100%. This seems to have helped, the plants look happier this morning and the temperature was around 81°F at mid day.
ReikoX
Knight of the BlackSvn
Last night I cleaned up anything under the first screen, top dressed with the leftover buds from the F.A.M. 2022 seed run, and watered everything in with some Fish Brew and Mammoth P. The lights got switched to 12/12, the environmental controller got setup for a higher VPD (1.5), and the AC Infinity fan was adjusted. I need to either setup an offset, find my old sensor, or buy a new one.
