What's new
  • As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.

PPK vert 4 plant 5 light grow show and DIY, 3400w, CO2

Desert Hydro

Well-known member
Veteran
only if youre counting all the dust and junk lol. i bought 6 bags and only needed 2. i was told afterwards that you really dont need a lot of media since you are flooding every hour and that will give it time to do the wet/dry thing. im gonna order those 7 gal tubs since they are way more sturdy and i actually trust them to hold the weight of it all. i think i may order another 10x10 tent and set up my second ppk as soon as some of my bumper crop is ready.
 

delta9nxs

No Jive Productions
Veteran
After all those times you told me to use turface, and look whos on the diatomite now, lol. With no screening I had troubles with plugging the single tailpiece back in the 3.5 gal shotgun hole days...now im thinking about a turface diatomite pumice blend, as long as I can get the proper porosity. I still need to give your rooting technique a shot...

i used to be all hopped up on turface, now i'm all hopped up on 8822!

what held me back on it initially is that it is more fragile. you can break it in your hand. but really if it holds up for a grow it's good enough if it's disposable.

i like the lighter weight but what has really got me going is the difference in bud quality. not a huge difference but very noticeable.

i'm pretty sure that it has a greater internal pore space which gives each particle slightly greater storage capability and would partly explain the lower bulk density.

i haven't lost a cutting yet!
 
Last edited:

Desert Hydro

Well-known member
Veteran
youre taking cuttings in it??? how?
i was just about to order some pellets but if this works ive got tons of it just laying around


more night shots. the buds are filling in so damn nice. im loving this strain in this system. i think im gonna run it one more time and then put a second strain in the ppk im gonna start building. if i can get my damn bubblegum to root i wanna run her in there for sure. she is looking so nice in just 1 gal of rockwool. she would blow up huge in this system and her branching is quite impressive

i found a cool way to use my cooltubes. just flipped the socket around so it hangs out and then i can air cool my bulbs still without the glass. pretty freakin sweet. best of both worlds.
 

Attachments

  • IMG_1411.JPG
    IMG_1411.JPG
    82.8 KB · Views: 24
  • IMG_1410.JPG
    IMG_1410.JPG
    86 KB · Views: 24
  • IMG_1408.JPG
    IMG_1408.JPG
    60.3 KB · Views: 22
  • IMG_1406.JPG
    IMG_1406.JPG
    25.1 KB · Views: 23

delta9nxs

No Jive Productions
Veteran
i'm rooting them in the same container they grow in. i was doing it with turface and the 8822 works just as well.

here's some recent ones, i'll be doing another cutting today.
 
Last edited:

delta9nxs

No Jive Productions
Veteran
so they are still getting flooded every hour and they are being given nutes?

i'm flooding every 90 minutes in both veg and flower. i'm cloning in the main veg system at 600 ppm just like everything else.

no domes or special treatment. just a big cutting stuck in a hole. some dip-n-grow.
 

Desert Hydro

Well-known member
Veteran
just ordered the feed tubs to build my second ppk. im gonna need to get another pump, res, hoses etc and i am also gonna try out D9's new bulkhead tailpiece and see how that works out.
 

Desert Hydro

Well-known member
Veteran
poppin some gage green genetics seeds at the moment that were gifted to me by a member here (thanks a million). got sun maiden, leia og and candy drop. the sun maiden genes sound good to me by the parents, but then again they all do lol. hopefully i will do them proud.
 
N

noyd666

I came across a product in oz called drysorb 25.00 for 15 kilo= 33lb was told it is fairly well granulated, will check this out shortly, maybe tomorrow. have any of you guys heard of this product? another called spillfix has more fines the man said. trying to find something to replace coco,because of deliverys etc. still intend to make ppk.
 

Mister_D

Active member
Veteran
I came across a product in oz called drysorb 25.00 for 15 kilo= 33lb was told it is fairly well granulated, will check this out shortly, maybe tomorrow. have any of you guys heard of this product? another called spillfix has more fines the man said. trying to find something to replace coco,because of deliverys etc. still intend to make ppk.

They sell drysorb here in the states also. I've never actually looked at it closely, but if it says it's made of calcined clay and the right consistency you are good to go (same thing as napa floor dry). Never heard of spillfix, but again check the label to see what's it's made of and consistancy.
 

Desert Hydro

Well-known member
Veteran
if my cuts take im gonna run moscas bubblegum. if not ive got some blue dream or i can make a drive and pick up some elites three hours away :(
 

Devoted1

Member
fittings

fittings

ok, washed 1 bag of floor dry to see how much it filled the tub. cut them all to size. installed and aquarium siliconed the fittings in place. now i just need to measure my hose length and cut them to size and hook everything up......TOMORROW lol. im tired and have to clean up my mess before she who must not be named sees it.

there were many fails today. my dremel caught fire, i used the wrong silicone and had to clean it off and go get the right kind and i made a wonderful mess in my dining area but i almost completed the build. i need it up and running in one week before i leave to san francisco for a few days. wish me luck. i really dont wanna come back to a disaster lol.

hey DH, what type of fittings are those? the ones where you have the garden hose connected at the bottom of the buckets. thanks
 
Last edited:

Desert Hydro

Well-known member
Veteran
the tent is one of the nicer ones but not the super expensive ones. i think its a homebox but i dont remember. its 9.5x9.5

they are electrical water tight fittings. you can get them at any home improvement store. another brand came recommended but i couldnt find them so i tried these and they work fine as long as you silicone the connections well. i havent had any leaks. they work really good and they clamp down on the garden hose to lock it in really well
 

Desert Hydro

Well-known member
Veteran
this is the one i used. just make sure it fits the hose you use.

Southwire 1/2-in Liquid Tight Connector
Not Yet Rated
$2.12
Qty.:
Add to Cart
Item #: 116022Model #: 58133601
Superior liquid tight seal and pull out strength
Simple, quick and easy assembly
No threading of the conduit or tubing required
 

Attachments

  • 032886895630lg.jpg
    032886895630lg.jpg
    5.8 KB · Views: 23

Latest posts

Latest posts

Top