What's new
  • As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.

New to Ebb&Flow setup in Basement...res temps to cold?

budelight

Discovery Requires Experimentation
Veteran
They look like they are almost done mabey they are a 10 weeks strain. Just start to flush with plain water and flush for atleast 10 days
OK. I will talk to my other half about that. I agree.

Durring the Flush, do buds tend to swell or shrink?

Cheers!
Budelight
 
T

TribalSeeds

Check your trichomes, we can't see them under a loop. Wait until they are atleast all cloudy before you flush. Depending on effect, pull them when they have enough amber on them.
They will be using up stored nutes during the flush and they will swell
 

budelight

Discovery Requires Experimentation
Veteran
Check your trichomes, we can't see them under a loop. Wait until they are atleast all cloudy before you flush. Depending on effect, pull them when they have enough amber on them.
They will be using up stored nutes during the flush and they will swell
Thank you TribalSeeds

What if not all the buds are ripe yet? Is it possible to flush, then cut the colas, then re-feed lightly for a week and then harvest the rest later or something?

How can i get max yield out of these plants if not all the buds are fully developed?

Peace & Puffs,
Budelight
 
T

TribalSeeds

Thank you TribalSeeds

What if not all the buds are ripe yet? Is it possible to flush, then cut the colas, then re-feed lightly for a week and then harvest the rest later or something?

How can i get max yield out of these plants if not all the buds are fully developed?

Peace & Puffs,
Budelight

When you think they are ready to flush, let them go another week or two. If there are buds that still don't look ready after flushing, you can let those go longer than two weeks. There's nothing wrong with a 3 week flush, though I think it can be done in a week.
When you start flushing you will trigger hormones that tell the plant that the end is near. I wouldn't bother trying to feed them after that.
1/2 - 2 tbl spn of molases per gal. Too much mg is bad for taste at the end. I wouldn't use much if you plan to flush through with it.
 

NFD

Active member
Hiya budelight! My sogouda is a 10 week strain. I did this run in 2 gal pots of supersoil and i"m pretty sure they got a solid 2 1/2 weeks of flush. They took 12 weeks to finish. Some of the strains I have run are ready as advertised like AK47 at 56 days, was perfect, but I don't take them until they look done. the sogouda seemed to take forever but all of a sudden... bam, they were done.
 
H

Homer J Pimpin

bud e cut yer cola's when you feel they are done.......leave the budlets and continue with water only.......the smaller underdeveloped buds will swell and finish........no need to add more food if you have any green in yer leaves plenty stored up......keep flushing and the budlets will swell up and finish off....
 

budelight

Discovery Requires Experimentation
Veteran
:rasta:



Here's my standard mantra on flushing....

If a plant is finishing on her own in the proper time frame, I don't bother to flush it.

If she seems to be lagging behind a bit, and I need to expedite the final week or two of gland production and color change, I'll move her over to H2O only with no nutes.

Here's the reasoning.....
When a plant is in the last stages of flowering, one of it's natural processes is to stop the uptake of nutrients. This change in chemistry signals the plant to complete it's seeding process. While most of our plants are not allowed to produce seeds, the same signal tells the plant to stop actively producing THC within it's glands. As a result the existing glands start to decay and turn amber. Yes, those amber trichs we all so seek are in fact decayed. By flushing all available nutrients, the plant is fooled into “thinking” its in the last stage of life. As such, you force the plant into it's final phase and can expedite the process of changing clear trichs to a rich brown hue. Of course, not everyone desires amber. Those that desire less of a narcotic couch-lock high will want a higher percentage of clear glands.

Likely doesn't directly answer your question, but maybe offer up a drop of food for thought.

:rasta:

^ 1 and 1/2 to 2 weeks before harvest

Hey budelight, I just had a look at your thread, nice plants I'll read it closer later. In my opinion I'd say those buds don't look like they'll be ready to harvest for at least two weeks so I'd wait. I'm doing the same with a few of mine, I'll take a few shots of one tomorrow and we can compare. It looks like I'll harvest 3 now, 4 in a week or so and the last 4 in 2-3wks? I got a nice selection.

THANK YOU ALL!
BeL
 

JTDuffet

Member
I think they are not going to really get much bigger. some of the photos show the buds having all red hairs. it's been what, nearly 65+ days, they should be coming along by now....
as others have said, check out the trichomes under a mini scope. they sell em at radio shack for 10 bucks... and see what they look like. mine are all cloudy right now, and almost none amber.. but the buds have crowned quite a bit, and i don't like when they overcrown and pull apart.. if your trichs have amber in there, them its time NOW..

if you have clones lined up, i would start putting the effort into the new batch and begin the end cycles on this one... flush em for 3 days and chop after a dark period.

-jt
 

budelight

Discovery Requires Experimentation
Veteran
F62 - When Should I Start Flushing?

F62 - When Should I Start Flushing?

Seeking advice on my Lights if you can afford to share your throughts

https://www.icmag.com/ic/showthread.php?t=233135

Here are the ladies today -> THEY SMELL LIKE SWEET PEZ CANDIES!
 

Attachments

  • IMG_3796.jpg
    IMG_3796.jpg
    122.9 KB · Views: 21
  • IMG_3798.jpg
    IMG_3798.jpg
    122.6 KB · Views: 17
  • IMG_3800.jpg
    IMG_3800.jpg
    69.9 KB · Views: 21
  • IMG_3805.jpg
    IMG_3805.jpg
    82.1 KB · Views: 15
  • IMG_3804.jpg
    IMG_3804.jpg
    74.8 KB · Views: 20
  • IMG_3803.jpg
    IMG_3803.jpg
    67.5 KB · Views: 18
  • fatmans
    fatmans
    16.5 KB · Views: 39
  • IMG_3801.jpg
    IMG_3801.jpg
    76.1 KB · Views: 14

budelight

Discovery Requires Experimentation
Veteran
Thanks pimobud

As of today Here are the Specs:

Ph = 7.6
ppm = 720
Temp = 64.4* F (lights on)
Humidity = 40% (lights on)
Nutrients: MaxiBloom (with Monster Bloom additive)
Water = RO (100 ppm)
Light = 70W HPS at 10 hours (just dropped from 11)
Hydro system = Ebb and Flow (custom made 14" x 14")
plants = 3 clones, LST'd zig-zag
Stage = 9 weeks, about to flush

I did not change the water this weekend due to lack of time, I will change the water tonight and then start flushing with tap water this weekend, unless anyone would like to chime in and add their advice

:artist:
The plants are growing:

:thank you:
 

Attachments

  • IMG_3820.jpg
    IMG_3820.jpg
    128.6 KB · Views: 14
  • IMG_3838.jpg
    IMG_3838.jpg
    73.2 KB · Views: 15
  • IMG_3836.jpg
    IMG_3836.jpg
    77.7 KB · Views: 17
  • IMG_3835.jpg
    IMG_3835.jpg
    76.1 KB · Views: 20
  • IMG_3828.jpg
    IMG_3828.jpg
    65.7 KB · Views: 14

budelight

Discovery Requires Experimentation
Veteran
F66 - Starting the Flush...

F66 - Starting the Flush...

With wahter that has a 4.8 ph and 84ppm ... We Start The Flush!

Decided the ladies did not need another week of nutes just by looking at them.

Here are the photos i just took to show you what i mean

Cheers,
Budelight

PS. Thanks for watching all, i will continue to update, but i want to give a :thank you: to all the supporters/trouble-shooters/mentors/followers that we have here. This ones for you!
 

Attachments

  • IMG_3839.jpg
    IMG_3839.jpg
    119.7 KB · Views: 16
  • IMG_3840.jpg
    IMG_3840.jpg
    80.2 KB · Views: 20
  • IMG_3844.jpg
    IMG_3844.jpg
    60.3 KB · Views: 15

budelight

Discovery Requires Experimentation
Veteran
You got updates?
Hey Buddy!

I just took all the large fan leaves off and changed the water; it has been since Wednesday with this water.

The water i took out was 210ppm and 7.6 ph.
The water i put back in is 87ppm and 4.6 ph.

BeL
 

budelight

Discovery Requires Experimentation
Veteran
This is my setup for those who dont know how im working.

Comments are welcome.
Budelight

:artist:
 

Attachments

  • IMG_3848.jpg
    IMG_3848.jpg
    69.9 KB · Views: 16
  • IMG_3849.jpg
    IMG_3849.jpg
    68.4 KB · Views: 14
  • IMG_3850.jpg
    IMG_3850.jpg
    94.4 KB · Views: 16
  • IMG_3851.jpg
    IMG_3851.jpg
    86.5 KB · Views: 16
Top