EZ-Cloner 30 or 60 is this a good cloning machine?

[wvkindbud38]

Hi guys I used to take clones 7 or 8 years ago but because of space issue I started using Femished seeds(which i love)......I used to just take my cuttings and put them in 20 oz cups of soil with a dome over them until they rooted......I didn't really have the best results........But now I'm going to start back taking a few clones......I've been thinking of getting the EZ-Cloner 30 or 60.....I plan to grow my clones out in 3 or 5 gal pots....I grow big plants so I don't think I need the 120.......So anybody that has a EZ-Cloner please let me know what you think about it and if it's a good machine.....also is the 60 alot bigger than the 30?.......Can you really fit 30 clones in the machine or is that pushing it? I'd probably be good with 15 to 20 clones maybe a few more.....So let me know what you guys that's used the EZ-Cloners think about them.......Any info/advice/help with the EZ Cloner will be greatly appreciated

PS......I don't wanna built my own clone machine.......The DIY machines are nice but I can't build anything and would rather buy a good clone machine..

 

[Greyskull]

hey i love the the ezclone 60
best clone machine - MINIMAL LOSS
i know i know some folks are great with rapid rooters and cubes and cups of coco and what not, but sorry ezclone for me, thanks.
i have a few times successfully double loaded ala put 2 cuts per site...
its total 'set and forget'

 

[dj.scotfree]

Hey bro... If you want plans for a great cloner... pm me... I will send you the plans... i built a 20 site cloner out of a Rubbermaid tote... All in all it cost about 60-70 bucks... I have 100% success... I also put 2-3 clones per collar... so it is a 20-40-60 site cloner...

peace, djsf

 

[lordbudly]

its sooooooo expensive though.

 

[reverev313]

this is what i like 36 cloner the rainforest 17 gallon awsome machine

 

[chubbynugs]

Almost perfect success rate on clone in my ez-clone 60 site. I love my ez more then any of my other grow paraphernalia. Definitely comes through in a pinch.

 

[wvkindbud38]

hey i love the the ezclone 60
best clone machine - MINIMAL LOSS
i know i know some folks are great with rapid rooters and cubes and cups of coco and what not, but sorry ezclone for me, thanks.
i have a few times successfully double loaded ala put 2 cuts per site...
its total 'set and forget'

Yea I'm not as good with cups of soil and/or cubes and domes.......do you have any problems with the water in the resiavour getting to warm from the pump? I thinks that's one complaint I saw about the EZ-Cloner........Thanks Grey.... I've saw some people put 2 cuts in 1 neoprene block.....I'm really leaning toward getting one of these EZ-Cloners........Anybody that has a EZ-Cloner please let me know what you think about it....Thanks alot guys any info/help/advice or anything about the EZ Cloner is appericated.......thanks guys but I'm not into building a clone machine........I know the EZ-cloner is pricey but I can't build anything

 

[wvkindbud38]

this is what i like 36 cloner the rainforest 17 gallon awsome machine

That's a very nice cloning machine you have there.......what brand is it and do they still make them?........I've saw the Daisy cloners and some other clone machines......but kinda liked the Ez-Cloner.........thanks alot guys for all your info/help.......keep it coming......

 

[chubbynugs]

That's a very nice cloning machine you have there.......what brand is it and do they still make them?........I've saw the Daisy cloners and some other clone machines......but kinda liked the Ez-Cloner.........thanks alot guys for all your info/help.......keep it coming......

That is a rainforest aero set up.

 

[wvkindbud38]

Hey bro... If you want plans for a great cloner... pm me... I will send you the plans... i built a 20 site cloner out of a Rubbermaid tote... All in all it cost about 60-70 bucks... I have 100% success... I also put 2-3 clones per collar... so it is a 20-40-60 site cloner...

peace, djsf

Thanks alot DJ but I can't build anything.......I started to make a DIY Carbon Filter awhile back and ended up saying F-it and bought one.....I decided them that I wouldn't try to make anything again........Thanks anyway DJ glad to hear from you stay in touch

 

[resin_lung]

if cost is not an issue.... go for it! i love them.but they really could be built for alot less money! and just as good. i have 3 of the 120's and they work great. the bigger the better IMO. the more water it holds the cooler it will run. the pumps can heat the water pretty good.

 

[Perpetual]

I myself didn't have good luck with my ezclone 60 site. I had read also that it uses the same pump as the 120 site, so in the 60 that runs the temps too high. It is so damn expensive too. build something similar for a tenth of the price, you can do it and were here to help! oh congrats on 420 posts.

 

[dj.scotfree]

No prob bro... Good luck with the cloning!

 

[wvkindbud38]

if cost is not an issue.... go for it! i love them.but they really could be built for alot less money! and just as good. i have 3 of the 120's and they work great. the bigger the better IMO. the more water it holds the cooler it will run. the pumps can heat the water pretty good.

No cost isn't a issue....I just want the best clone machine I can get.......Does any of you guys with a EZ clone 60 have much problems with the water getting to hot......I know alot of people have the 120......like you said bigger is better and it would keep the water cooler......the 60 site would be plenty big enough I think but if the 120 site keeps the water temp at a better place then maybe I should think about the 120......all this info is great guys....alot of things to consider and your thoughts and ideas are helping

 

[Perpetual]

Id suggest the 120 then!

 

[Greyskull]

last year i didn't have any temp issues....
this year, 5th year the unit has been in use, i started getting some temp problems.
then the pump (magdrive) died (after 5 years no big deal)....

so i bought a new pump, and a 1/10 hp water chiller to hot rod the ez.
my temps are stayng at a solid 71 and i am styling loving the results so far. a little bit of overkill but i figured "what the hell"... clones & my ez are super important to me.

 

[lordbudly]

so no cheap ez cloners?

 

[wvkindbud38]

last year i didn't have any temp issues....
this year, 5th year the unit has been in use, i started getting some temp problems.
then the pump (magdrive) died (after 5 years no big deal)....

so i bought a new pump, and a 1/10 hp water chiller to hot rod the ez.
my temps are stayng at a solid 71 and i am styling loving the results so far. a little bit of overkill but i figured "what the hell"... clones & my ez are super important to me.

Where could I get a water chiller and how much do they run/cost?.....if I decide on a 60 maybe I'll get a chiller to have just in case......I'm not sure theres alot of things to take into consideration.......thanks guys

 

[Blowstrees]

EZ Clone 60

EZ Clone 60

 

[chubbynugs]

No cost isn't a issue....I just want the best clone machine I can get.......Does any of you guys with a EZ clone 60 have much problems with the water getting to hot......I know alot of people have the 120......like you said bigger is better and it would keep the water cooler......the 60 site would be plenty big enough I think but if the 120 site keeps the water temp at a better place then maybe I should think about the 120......all this info is great guys....alot of things to consider and your thoughts and ideas are helping

I know in summer time my cloner res will get in the 80s for sure but that has never stunted my clones. Every day freeze a 20 ounce bottle of water and toss it in the res to keep it cool if that is the prob.