TheGhostoftheNorthside
Active member
You want gnatrol powder.
-
ICMag with help from Phlizon, Landrace Warden and The Vault is running a NEW contest for Christmas! You can check it here. Prizes are: full spectrum led light, seeds & forum premium access. Come join in!
Dear diary, 12-12 from seedling.
- Thread starter CocoNut 420
- Start date
It's a week today since planting pre soaked seeds there's two didn't show and two a little slow.
All in I'm happy with them its time to flip them.
I've put a heat matt under the tray and plugged it into a controller to help with temps during the night.
Heat matts ime are too hot for small amounts of coco so I've put the temp probe under a pouch to maintain 22/23C⁰
It's the only source of heat until I get a heat sorted out.
Let's see what happens?
@mr.brunch welcome, thanks for stopping in
Have a nice weekend everyone
All in I'm happy with them its time to flip them.
I've put a heat matt under the tray and plugged it into a controller to help with temps during the night.
Heat matts ime are too hot for small amounts of coco so I've put the temp probe under a pouch to maintain 22/23C⁰
It's the only source of heat until I get a heat sorted out.
Let's see what happens?
@mr.brunch welcome, thanks for stopping in
Have a nice weekend everyone
Last edited:
Hey folk's it's been a few days at least 
Things are looking up.
I've since put in a heater and lifted the tray up off the floor it's too cold down there even with a heater.
I've a couple of late sprouts I've put into the clone tent to get them growing properly 1st.
They've been a little slow I'm a bit unsure about them they're not really with the program, let's see what happens?
Edit, Sun 15th....
#2 blue is growing, its only grown the tiniest fraction out the tip but it's verified growth, hopefully it'll catch on and grow at a normal rate?
Things are looking up.
I've since put in a heater and lifted the tray up off the floor it's too cold down there even with a heater.
I've a couple of late sprouts I've put into the clone tent to get them growing properly 1st.
They've been a little slow I'm a bit unsure about them they're not really with the program, let's see what happens?
Edit, Sun 15th....
#2 blue is growing, its only grown the tiniest fraction out the tip but it's verified growth, hopefully it'll catch on and grow at a normal rate?
Last edited:
Being Christmas I've been treating myself to make life easier.
Just waiting on Santa now
Just waiting on Santa now
Last edited:
aCBD
Well-known member
Curious what you think about it after some testing.Being Christmas I've been treating myself to make life easier.
View attachment 19114120 View attachment 19114121 View attachment 19114122
Just waiting on Santa now
A bro brought these to my attention it's a nugget of gold if you're thinking about buying a bowl trimmer?
h ttps://youtu.be/QRA-vNB_zWw?si=9RbzeI_8vdo-ETfq
I've been looking a bit closer at different trimmers and it appears only the automated and professional ones costing many hundreds have that type of grate in them, apparently they make a better job tbh I'd be happy with the results I'm seeing on Yt.
$150±
They're only a fraction of some of them, the yezfarm for example is $450 its identical.
h ttps://youtu.be/QRA-vNB_zWw?si=9RbzeI_8vdo-ETfq
I've been looking a bit closer at different trimmers and it appears only the automated and professional ones costing many hundreds have that type of grate in them, apparently they make a better job tbh I'd be happy with the results I'm seeing on Yt.
$150±
They're only a fraction of some of them, the yezfarm for example is $450 its identical.
Thanks for sharing bud i had a quick look but that's beyond my budget tbh, it'd be nice to have a automatic one but I couldn't justify the cost, they do look ideal though.
its not atuomatic one but you can put power drill on it to be automatic version
For that pot type trimmer I ordered I was thinking something like a microwave motor with a variac would be easy to modify?
I'll see what it's like I quite 1st I do enjoy a diy project?
Speaking of Diy I'm going to try and make a static wand to clean sift.
It's constant supply of static its a good start.
If you're wondering what I'm on about?
Static can be used to attract the leaf or resin, one of them is + charge and the other is - charge which attract each other?
If you know anything about getting a static feild on a sheet of baking paper or tin foil that would be handy tbh idk what I'm doing it just seems
logical that it might work
I'll see what it's like I quite 1st I do enjoy a diy project?
Speaking of Diy I'm going to try and make a static wand to clean sift.
It's constant supply of static its a good start.
If you're wondering what I'm on about?
Static can be used to attract the leaf or resin, one of them is + charge and the other is - charge which attract each other?
If you know anything about getting a static feild on a sheet of baking paper or tin foil that would be handy tbh idk what I'm doing it just seems
logical that it might work
Last edited:
20th December...
The last time I updated was the 11th December
1wk later 18th Dec...
I've no updates photos it's early here I'll post some Sat that'll be them 3wks.
21st Dec 3wks old today.
Fungus gnat proof
The last time I updated was the 11th December
1wk later 18th Dec...
I've no updates photos it's early here I'll post some Sat that'll be them 3wks.
21st Dec 3wks old today.
Fungus gnat proof
Last edited:
25th December...
Hello folk's, i put the plants into my flower tent with a 250w mh at the weekend, I don't have the hardware to continue using my 2x2ft tent a 2x2ft tray doesn't even fit
There's a couple look a bit poor idk what the cause is?
I've given them fair chance my patience is wearing a little thin with them.
Merry Christmas everyone and best wishes for the festive period
Hello folk's, i put the plants into my flower tent with a 250w mh at the weekend, I don't have the hardware to continue using my 2x2ft tent a 2x2ft tray doesn't even fit
There's a couple look a bit poor idk what the cause is?
I've given them fair chance my patience is wearing a little thin with them.
Merry Christmas everyone and best wishes for the festive period
Hey folk's, so that's 4wks today in 12-12 and I'm starting to see the sexes of some, I've culled 5 iirc and confirmed a few females.
The side project is showing some difference.
After I've confirmed the sex of the remaining plants I'll look at re potting and maybe go to 11-13?
Have a nice weekend folk's
The side project is showing some difference.
After I've confirmed the sex of the remaining plants I'll look at re potting and maybe go to 11-13?
Have a nice weekend folk's
1st January...I potted them and changed timer to 11-13hrs (31 days)
Aswell as potting them I've taken down the MH and plugged in the led (430w 25/28k lux)
They're between 8/10" tall and sexed, let's see what happens?
Aswell as potting them I've taken down the MH and plugged in the led (430w 25/28k lux)
They're between 8/10" tall and sexed, let's see what happens?
Last edited:
Thank you bud I appreciate your comment thanks for stopping inJust dropping in to say your grow is ace, you are very detailed in your notes, a lot to learn from, and those last plants you harvested look amazing ,
Hey folk's, I thought I better update my attempt at getting rid of fungus gnats 100% by keeping the gnats in/out of the pots using bags and feeding from the bottom....it's worked 100% I've not seen a single gnat in almost 6wks ±
It needed around 7 weeks to completely eradicate them but I'd say 2 months is essential to prevent 1 late gnat undoing all your work, it's a successful way to eradicate fungus gnats without using poison or even spending money.
Have a nice weekend everyone
