first page:
Installing the air cooling
This luminaire requires active air cooling. All heat generating electronics are mounted in the 150 mm tube. Mount the input of the ducting to the side which has the electronics and the Wieland connector. We recommend approximately 50-100 m3/h to cool the plasma electronics, depending on the input temperature of the air. The luminaire has a double temperature safety circuit which will switch off the power when the internal temperature reaches 70 degrees Celsius. In case of failure of the first temperature safety the electronics themselves have internal temperature safety circuits. When installing more luminaries in line increase air flow. To tune the air flow measure the output temperature of the air: for safe use it should not exceed 50 degrees Celsius.