The Original O'l Farts Club.

[Zivilpolizist]

They are looking good. I too have struggled with different growth growing more than one strain. I’m in soil so I can give my short plants a little booster chair to the lights to even things up. Ima;ways plan just one strain but it doesn’t always work out that way

Unfortunately I can't do this anymore since I'm using a no-till living soil box now

Growing different strains simultaneously is something you need to know your strains for.
While this is hard when growing from seeds, clones you already have grown once are quite easy to handle imho.

The only strain I know of my three is the Amnesia Core Cut on the right side. It's a super silver haze pheno of which clones are available in Europe since 1994.
The left ones are said to be Bruce Banner... which I first read about in this OF thread and the middle ones are Pineapple Punch, noname selection of the growshop which sells the clones in Austria. Probably very much on the indica side.

 

[Gray Wolf]

Sorry if you showed it but can I see the design on the mouthpiece?
I very well may nave what you want as I have more mouthpieces than adapters........several boxes worth.

Cold and snowing this morning so let's go for a little 4:20 run said Bubba.

Good morning brother dawg! I didn't post it, but I'll share it.

The purpose is to bleed in precisely the right amount of air to cut the incoming vapors to the right density.

I had a couple of the basic design made and taped over the carb tube on one and experimented to determine what size bleed hole would be required for the back pressure and flow of my specific rig. I then had the second one modified to reduce the carb tube opening to .150", but the edges of my holes in the thin tape were sharp and the edges of the hole in the rolled top are rounded, thus enhancing their flow.

 

[Gray Wolf]

mornin’ folks….
rain last evening.. clearing and crisp….
another day of shit on tap….
keep that fire stoked…plates full… View attachment 19126269

Breakfast of champions!

 

[SubGirl]

Unfortunately I can't do this anymore since I'm using a no-till living soil box now

Growing different strains simultaneously is something you need to know your strains for.
While this is hard when growing from seeds, clones you already have grown once are quite easy to handle imho.

The only strain I know of my three is the Amnesia Core Cut on the right side. It's a super silver haze pheno of which clones are available in Europe since 1994.
The left ones are said to be Bruce Banner... which I first read about in this OF thread and the middle ones are Pineapple Punch, noname selection of the growshop which sells the clones in Austria. Probably very much on the indica side.

I was wondering what was under them. Did you manage to take clone off them before putting them into flower?

 

[dogzter]

Good morning brother dawg! I didn't post it, but I'll share it.

The purpose is to bleed in precisely the right amount of air to cut the incoming vapors to the right density.

I had a couple of the basic design made and taped over the carb tube on one and experimented to determine what size bleed hole would be required for the back pressure and flow of my specific rig. I then had the second one modified to reduce the carb tube opening to .150", but the edges of my holes in the thin tape were sharp and the edges of the hole in the rolled top are rounded, thus enhancing their flow.

View attachment 19126292

They flame polish the ends to prevent stress points and chipping and glasswork math is a suggestion mostly.

You don't want to feather the intake with a finger?
I would get it made without the carbhole and drill that myself with a diamond bit and sand it smooth.

 

[Zivilpolizist]

I was wondering what was under them. Did you manage to take clone off them before putting them into flower?

I just bought three clones of each strain the third ones are trained as mothers

 

[dogzter]

14mm Volcano Hybrid Easy Valve Water Pipe Bag to Bong Adapter

Transform Your Vaping Experience with the 14mm Volcano Easy Valve Water Pipe Bag Adapter Introducing the 14mm Volcano Easy Valve Water Pipe Bag Adapter, the ultimate accessory for elevating your vaping experience. Designed to seamlessly connect your Easy Valve Bag to a 14mm down-stem on any...

vapewidgets.com

Hows this @Gray Wolf ?

 

[Gray Wolf]

They flame polish the ends to prevent stress points and chipping and glasswork math is a suggestion mostly.

You don't want to feather the intake with a finger?
I would get it made without the carbhole and drill that myself with a diamond bit and sand it smooth.

It is ok to have rounded edges, I just need to reduce the hole size.

I can modify the airflow with my finger using the V-1 version, but want it automatic.

14mm Volcano Hybrid Easy Valve Water Pipe Bag to Bong Adapter

Transform Your Vaping Experience with the 14mm Volcano Easy Valve Water Pipe Bag Adapter Introducing the 14mm Volcano Easy Valve Water Pipe Bag Adapter, the ultimate accessory for elevating your vaping experience. Designed to seamlessly connect your Easy Valve Bag to a 14mm down-stem on any...

vapewidgets.com

View attachment 19126301
Hows this @Gray Wolf ?

I actually have one of those but it doesn't work for shit on all bags. The area just behind the die formed part is oblong so sticks in some.

 

[BumSplodgeBrownPants]

Good day OFs!

14mm Volcano Hybrid Easy Valve Water Pipe Bag to Bong Adapter

Transform Your Vaping Experience with the 14mm Volcano Easy Valve Water Pipe Bag Adapter Introducing the 14mm Volcano Easy Valve Water Pipe Bag Adapter, the ultimate accessory for elevating your vaping experience. Designed to seamlessly connect your Easy Valve Bag to a 14mm down-stem on any...

vapewidgets.com

View attachment 19126301
Hows this @Gray Wolf ?

Hi Dog, GW

Is that drawing for the volcano bags through a water pipe?

I've been running my volcano over the festive period through water, I just shoved a bit of SSV hose in the hole and into the bubbler hole.

I also cranked the unit up to 11 and been using the capsule chamber, without capsule just fine ground dope... I've had to tap out on a couple of standard sized bags doing this. 2 bags and the chamber is spent and I'm grinning with my eyebrows.

 

[Goldhedge]

So far the low bid is $26K for 8 windows, or $3250 each, which seems exorbitant to me.

Sounds costly to me as well!

Labor costs is probably 80% of that, or is that just the price of the windows??

Maybe find a guy local that is handy with tools and buy the windows?

Was very sick last night with the sweats and a little fever.
Hope everyone has a great day

Sweats means the fever is breaking. When I'm ill I hit the sack and cover in down comforters to sweat it out.

Have you tried HCQ & Zinc? Ivermectin & Zinc also works. Some suggest they also work for other virii besides the cv19 variety.

Resources:

https://covid19criticalcare.com/ivermectin/

https://vladimirzelenkomd.com/wp-content/uploads/2021/08/Prophylaxis-Protocol.pdf

You can buy zinc on AMZN and the others from India if you can't get a Dr. to script you. Takes a few weeks though so plan ahead.

I've used India Meds +91 92841 02761 before and Michael +91 95607 08364. Call on Whatsapp

 

[Gray Wolf]

Good day OFs!



Hi Dog, GW

Is that drawing for the volcano bags through a water pipe?

I've been running my volcano over the festive period through water, I just shoved a bit of SSV hose in the hole and into the bubbler hole.

I also cranked the unit up to 11 and been using the capsule chamber, without capsule just fine ground dope... I've had to tap out on a couple of standard sized bags doing this. 2 bags and the chamber is spent and I'm grinning with my eyebrows.

Good morning brother BSBP!

That drawing has a couple of parts on it. Part 1 is an adapter for a volcano bag and a Submarine Girl bubbler assembly.

Part 2 is a mouthpiece for my dab pipe assembly, which also uses bubblers to cool and add moisture.

The mouthpiece bleeds in air to further cool and dilute the mixture so that it easier on my lungs.

 

[dogzter]

The plant that was just cotyldons forever has now decided to be triploid with apparently normal looking growth now........looking forward to see what else it does.

The maple leaf indica X ak47 got its first feed this morning since uppotting.

Lump is another outlier a slow starter in flower but she sure makes up for it.

 

[Gray Wolf]

Sounds costly to me as well!

Labor costs is probably 80% of that, or is that just the price of the windows??

Maybe find a guy local that is handy with tools and buy the windows?

I can find craftsmen to exactly duplicate the originals for way less than that and they lasted 98 years. I have internal storm windows, so don't need the seal or insulating panels.

 

[SubGirl]

It is ok to have rounded edges, I just need to reduce the hole size.

I can modify the airflow with my finger using the V-1 version, but want it automatic.

I actually have one of those but it doesn't work for shit on all bags. The area just behind the die formed part is oblong so sticks in some.

Is that why we use the rubber band to keep it from sucking in the adapter. That’s what I use…

 

[Gray Wolf]

Is that why we use the rubber band to keep it from sucking in the adapter. That’s what I use…
View attachment 19126317

Version 1. The drawing is for V-2 so that the rubber band stop isn't required. I'll send you a V-2 and you can compare them both.

 

[SubGirl]

Good morning brother BSBP!

That drawing has a couple of parts on it. Part 1 is an adapter for a volcano bag and a Submarine Girl bubbler assembly.

Part 2 is a mouthpiece for my dab pipe assembly, which also uses bubblers to cool and add moisture.

The mouthpiece bleeds in air to further cool and dilute the mixture so that it easier on my lungs.

The bubbler does add coolness and moisture to smooth out the hit for sure

 

[Travis Kelcee]

Good morning OF's

Cold and windy with wind chills in the teens

 

[Gray Wolf]

Good day OFs!



Hi Dog, GW

Is that drawing for the volcano bags through a water pipe?

I've been running my volcano over the festive period through water, I just shoved a bit of SSV hose in the hole and into the bubbler hole.

I also cranked the unit up to 11 and been using the capsule chamber, without capsule just fine ground dope... I've had to tap out on a couple of standard sized bags doing this. 2 bags and the chamber is spent and I'm grinning with my eyebrows.

I might also note that a carburator air intake isn't required on a Submarine Girl bubbler assembly. Just the water cools and moisturizes a Volcano bag of vapor enough.

 

[SubGirl]

Version 1. The drawing is for V-2 so that the rubber band stop isn't required. I'll send you a V-2 and you can compare them both.

The rubber band one works great. I love it

 

[Boo]

You guys just amaze me with all of your glass and your MacGyver attitude towards getting high. I am so far in the Stone Age when it comes to that I’m just not understanding how some of this stuff works. I’m stuck in the 50s were a joint is all I smoke even though I’ve got all kinds of nice rigs… something about an old dog and new tricks…
Speaking of old dogs, Dutch was awfully frisky this morning and I really enjoyed seeing that in him as he gets so old…