Not at all, plus your passion for your plants must also be 100 watts.Mars Hydro are you faking it or is it really only 100w my TS600 light!?
View attachment 18912699 View attachment 18912700
So it's 200 watts.
Share your grow pictures-- Best
- Thread starter Mars Hydro Led
- Start date
So it's 200 watts.Mars hydro sp30000 x2Hei kaverit.
Tässä on lanka, jossa voit näyttää mitä tahansa omia kasvukuviasi. Kerro meille kanta ja ravinteet sekä muut kasvutekijät. Aloittelijat saattavat arvostaa sinua. LOL.
Jaan täällä muutamia palautekuvia valoistamme viitteeksi.
Toivottavasti nähdään upeita kasvuja.
Rauhaa ja rakkautta.äänauha
First Grow with my new setup:
70x70 and FC 1500 - Mars Hydro
@Mars Hydro Led May I ask you a question?
The 70x70 tent doesn't have a hole at the bottom. I "fixed" that problem - I now use the hole at the top to put the ventilation ducting in. It's for the fresh air to be sucked in.
When I use the small little things on the side of the tent (at the bottom), then there is light coming in, so that's not an option.
May I ask how I should use this tent to suck fresh air into it without getting light leaks?
I have been using the bottom hole of the tent to get my ventilation ducting in since I started growing.
Second question, do u have a PAR-Map or PPFD-Map for a 70x70 tent with the FC1500?
I just found the 60x60 map.
Just curious to know, if there are more then 350 PPFD coming to the corners.
70x70 and FC 1500 - Mars Hydro
@Mars Hydro Led May I ask you a question?
The 70x70 tent doesn't have a hole at the bottom. I "fixed" that problem - I now use the hole at the top to put the ventilation ducting in. It's for the fresh air to be sucked in.
When I use the small little things on the side of the tent (at the bottom), then there is light coming in, so that's not an option.
May I ask how I should use this tent to suck fresh air into it without getting light leaks?
I have been using the bottom hole of the tent to get my ventilation ducting in since I started growing.
Second question, do u have a PAR-Map or PPFD-Map for a 70x70 tent with the FC1500?
I just found the 60x60 map.
Just curious to know, if there are more then 350 PPFD coming to the corners.
Dime
Well-known member
If you have grown them before,which is the best quality high?Hawaiian Snow
View attachment 19114536
Columbian and Acapulco Gold
View attachment 19114538
Maui Wowie
Quad lined, then super cropped and tied to a wire hoop at 30" high And then the top three branches pulled into the middle ! Still 47 1/2" tall... Top to bottom is 20" of flower !
View attachment 19114537
Cheers
Chuckeye
Well-known member
Every grow is four different new strains so I'm looking Forward to some extended testing
Cheers
Maybe flip the tent upside down
?
I have to admit.. i thought 5 seconds about it xDMaybe flip the tent upside down
Hey u here? Hope ur doing good buddy!
Jeah, it would be wierd. I dont understand, why did Mars Hydro not a hole at the bottom? They did on the 4x4 and big tents.
Am i the only one who puts an air ducting in the hole at the bottom to get fresh air into the tent?
Its the only way i know, if u dont wanna get any light into your tent.
I put one now at the top.. seems wierd and funny at the same time.. i bought a 5m one.. should be fine then.
Well, if you got the space you can have a duct inserted in the upper part that ends near the floor.
Mars probably tought nobody would need to run duct for a tent that small. So they made it cheaper, that helps more, since small tents are mostly sold to begginers.
Mars probably tought nobody would need to run duct for a tent that small. So they made it cheaper, that helps more, since small tents are mostly sold to begginers.
Why would a small tent dont need fresh air sucked into it buddy?
Otherwise it would be 30°C permanently.
Yeah, there's 100% light coming in there. I tried that out... just a little bit opening, etc.
