Sup IC!
Tomorrow I break ground on my new setup I have been planning for quite a while now, and I thought you all might enjoy watching it go from nothing to something. This project is really setting me back and about to kick my ass all over the place for the next 4-6 weeks but when the nugs start pumping out it will be all worth it.
The space I am using is a 60 x 30 pole barn and I will be building out a 35 x 30 facility. Inside the 35 x 30 will be:
20L x 16W x 9H Flower Room
20L x 12W x 9H Veg Room
15L x 30W x 9H Work Room
The work room will serve many purpose. First, it will be the lung room. This is where I will house:
-5.0 Ton Excel XL with heater, top plenum, condensate pump, and later ozone
-Santa Fe XT Dehumidifier
-1000 gallon Black Agriculture Water Storage Tank (7.5ft tall and 5'9" diameter) hooked up to a 6 stage double ionized RO filter, Ecoplus commerical air pump, and a 700GPH water pump for circulation and waterings. Another 200 gallons of storage will be available for mixing nutes in.
Also in the work area besides obvious things like pots, soil, bamboos, tools, and nutrients will be:
-Soil Storage (somehow vertical still trying to figure that one out, mixed organic soil)
-Two 5 x 5 rooms each with 1K HPS on a Flip Flop used for seedlings, headstash, and most of all breeding projects.
-A Clone lab tent equipeed with T5's for harvesting male pollen, AKA the chamber of love.
-Ballast Bank with a custom power board with a PLC, sequential startup, four 40ft sensors with all avaialble protection circuits built by Dx.
The Flower Room will consist of:
-10K HPS in Yield Master II hoods, no glass no aircooling.
-Three 18" wall fans
-Excel AC ducting
-Large inline return fan to lung room
-Raised flooring with drain
-pond liner floor glued down
The Veg Room:
-4K MH, each on mover
-Three 18" wall fans
-Excel AC Ducting
-Large inline fan to return to lung room.
-Raised flooring with drain
-pond liner floor glued down
-Shelf system for moms and clones IE: t5's mounted to bottom of first shelf, bonsai 7 gallon pot moms, second shelf normal flouro with ezcloner 60
That is the jist of it. Of course awesome security features like motion lights, steel doors and frames, titanium kick plates, and I own and already use a 8 channel video system with motion detection that I can view on my phone, computer, or the systems monitor itsself. It takes 2.5 seconds for me to be alerted to motion as small as a fly if I set it to that sensitivity. Also it has infared night vision and works very well. All paper work hung neatly with contact numbers and registration numbers, this is a legal medical operation.
I plan to run 32 10 gallon sour bubbles the first round, which are already in veg and scheduled to have 7-8 weeks total veg time to meet my finish date goal. Most likely I will continue to mono crop between sour bubble and pre 95 sensi star since they are both so much fun to grow and perfect plants for indoor trees.
Other moms I will run will be grape bogglegum, purple urkle, and sour strawberry kush. These as of right now and in addition to sour bubble and sensi star are my production crops. For head stash I have ECSD and Arcata trainwreck. Currently I am working on my East Coast Sour Bubble cross, and intend to start some sensi star seeds ASAP to begin a back cross to the 95 sensi star. As far as breeding fun I could go on forever!
This will be perpetual as you can be, just enough time to harvest and clean the room before the next set slides in which I antcipate being sensi star.
My goal while running this for at least the next three years is to have one or two stable and marketable seedlines out and the experience to boot. I would love to one day long down the road cut production and concentrate on breeding.
Water and propane (500 gallon propane tank for co2 burner) will be getting ran to the barn in the next couple days. The barn already has 100amp service and its own main/meter. I will be upgrading to 200 amps.
I will get some pictures up tomorrow of the freshly gutted space. Tomorrow I order a SHIT ton of lumber, like 170 sheets of 4 x 8 OSB...... 100 2 x 4's....the list gets nuts. I have a toy shopping list that makes me smile and need 800 gallons of soil mixed up to get this going!
I am excited so thanks for listening if you read all this, lots of pictures to come I promise as this goes down!
Here is to not having a life until Febuary! Cheers IC!
Tomorrow I break ground on my new setup I have been planning for quite a while now, and I thought you all might enjoy watching it go from nothing to something. This project is really setting me back and about to kick my ass all over the place for the next 4-6 weeks but when the nugs start pumping out it will be all worth it.
The space I am using is a 60 x 30 pole barn and I will be building out a 35 x 30 facility. Inside the 35 x 30 will be:
20L x 16W x 9H Flower Room
20L x 12W x 9H Veg Room
15L x 30W x 9H Work Room
The work room will serve many purpose. First, it will be the lung room. This is where I will house:
-5.0 Ton Excel XL with heater, top plenum, condensate pump, and later ozone
-Santa Fe XT Dehumidifier
-1000 gallon Black Agriculture Water Storage Tank (7.5ft tall and 5'9" diameter) hooked up to a 6 stage double ionized RO filter, Ecoplus commerical air pump, and a 700GPH water pump for circulation and waterings. Another 200 gallons of storage will be available for mixing nutes in.
Also in the work area besides obvious things like pots, soil, bamboos, tools, and nutrients will be:
-Soil Storage (somehow vertical still trying to figure that one out, mixed organic soil)
-Two 5 x 5 rooms each with 1K HPS on a Flip Flop used for seedlings, headstash, and most of all breeding projects.
-A Clone lab tent equipeed with T5's for harvesting male pollen, AKA the chamber of love.
-Ballast Bank with a custom power board with a PLC, sequential startup, four 40ft sensors with all avaialble protection circuits built by Dx.
The Flower Room will consist of:
-10K HPS in Yield Master II hoods, no glass no aircooling.
-Three 18" wall fans
-Excel AC ducting
-Large inline return fan to lung room
-Raised flooring with drain
-pond liner floor glued down
The Veg Room:
-4K MH, each on mover
-Three 18" wall fans
-Excel AC Ducting
-Large inline fan to return to lung room.
-Raised flooring with drain
-pond liner floor glued down
-Shelf system for moms and clones IE: t5's mounted to bottom of first shelf, bonsai 7 gallon pot moms, second shelf normal flouro with ezcloner 60
That is the jist of it. Of course awesome security features like motion lights, steel doors and frames, titanium kick plates, and I own and already use a 8 channel video system with motion detection that I can view on my phone, computer, or the systems monitor itsself. It takes 2.5 seconds for me to be alerted to motion as small as a fly if I set it to that sensitivity. Also it has infared night vision and works very well. All paper work hung neatly with contact numbers and registration numbers, this is a legal medical operation.
I plan to run 32 10 gallon sour bubbles the first round, which are already in veg and scheduled to have 7-8 weeks total veg time to meet my finish date goal. Most likely I will continue to mono crop between sour bubble and pre 95 sensi star since they are both so much fun to grow and perfect plants for indoor trees.
Other moms I will run will be grape bogglegum, purple urkle, and sour strawberry kush. These as of right now and in addition to sour bubble and sensi star are my production crops. For head stash I have ECSD and Arcata trainwreck. Currently I am working on my East Coast Sour Bubble cross, and intend to start some sensi star seeds ASAP to begin a back cross to the 95 sensi star. As far as breeding fun I could go on forever!
This will be perpetual as you can be, just enough time to harvest and clean the room before the next set slides in which I antcipate being sensi star.
My goal while running this for at least the next three years is to have one or two stable and marketable seedlines out and the experience to boot. I would love to one day long down the road cut production and concentrate on breeding.
Water and propane (500 gallon propane tank for co2 burner) will be getting ran to the barn in the next couple days. The barn already has 100amp service and its own main/meter. I will be upgrading to 200 amps.
I will get some pictures up tomorrow of the freshly gutted space. Tomorrow I order a SHIT ton of lumber, like 170 sheets of 4 x 8 OSB...... 100 2 x 4's....the list gets nuts. I have a toy shopping list that makes me smile and need 800 gallons of soil mixed up to get this going!
I am excited so thanks for listening if you read all this, lots of pictures to come I promise as this goes down!
Here is to not having a life until Febuary! Cheers IC!
The liner will be up in loft soon.
