I’m going to write up a more detailed report on what and how I did all thus as I get closer to finishing
I’m building my own gliding trays
Two of them
4.5’x8’ trays that roll on V groove wheels on angled steel.
With FRP for the material inside of the table.
4-5” walls
Top side no FRP yet
FRP in bottom now
bottom of the tray
Caulk I use for seams
v groove roller wheels
and this is all in a 9.3’x11.4 room..
Angled steel will go full length of room
so 8’x9’ of canopy and I’ll be able to move either tray either way a total of 2.~something feet
I’ll also be installing a drain line from the tables.
and a res below the room with a pump > hardline > closet in the room > steel hose and water wand.
er something like dat
Thanks for tuning in
I’m building my own gliding trays
Two of them
4.5’x8’ trays that roll on V groove wheels on angled steel.
With FRP for the material inside of the table.
4-5” walls
Top side no FRP yet
FRP in bottom now
bottom of the tray
Caulk I use for seams
v groove roller wheels
and this is all in a 9.3’x11.4 room..
Angled steel will go full length of room
so 8’x9’ of canopy and I’ll be able to move either tray either way a total of 2.~something feet
I’ll also be installing a drain line from the tables.
and a res below the room with a pump > hardline > closet in the room > steel hose and water wand.
er something like dat
Thanks for tuning in