My room will be 5'×10'×9'tall. For a total of 450 Sq ft.
I will have an 8" hurricane fan for exhaust and a 6" hyper fan for intake
I have a window, and a vent leading into the basement for my options. The vent leading to the basement can have air pushed into the basement or I can tap into the dryer vent and push the air outside.
I will be using one reg light and one DE light both 8inch air cooled. To start I will only have one light to worry about. Later the DE will go up.
I have one 6000btu air conditioner and imagine I will need a bigger btu unit come summer here soon.
Two main catches here for my setup... the basement will always have 1150w for cacti running from 5pm to 11am. Those cacti lights are on the opposite side of the basement they are NOT under the ganja plant room or near the vent into the basement. The cacti lights simply add heat to the basement... secondly, the flower room is in the same room as my veg room will be.
The flower room is a 10×10×9' room. I will divide it in half and use a 5x10×9' portion for flower. Two 1000w lights only.
The other half will be for my veg. I only have 6-8 small plants in 1gallon pots going at the most. So at most I run 1 maybe 2 T5 4bulb lights for my veg. That covers the catches
Now I'm thinking of having the floor vent be my intake. And my exhaust will be the window disguised properly of course. The basement will have a small lung room for my air conditioner to sit in. The ac will exhaust out the dryer vent hole... I will cap off one end to the ducting so my furnace doesn't blow hot air into the basement.
The other end I will attach my 6" hyper fan for the intake. Ac will be manually adjusted I have no environment control unit as of yet. This way heat from the ac won't be a problem in the grow room.
Or I can simply pull air from outside and push it into the flower room via the vent in the floor with the 6inch fan on a speed controller..?
Also this way the air being moved through my reflector will be whatever temp my room is.
Would it be better to intake from outside via the window or dryer vent? If I were to do either one of these options my account wouldn't be able to have a lung room. Without making a hole in the floor which I can't do.
I do plan to get a carbon filter also I have the extra cfms for it already accounted for.
Thoughts appreciated
I will have an 8" hurricane fan for exhaust and a 6" hyper fan for intake
I have a window, and a vent leading into the basement for my options. The vent leading to the basement can have air pushed into the basement or I can tap into the dryer vent and push the air outside.
I will be using one reg light and one DE light both 8inch air cooled. To start I will only have one light to worry about. Later the DE will go up.
I have one 6000btu air conditioner and imagine I will need a bigger btu unit come summer here soon.
Two main catches here for my setup... the basement will always have 1150w for cacti running from 5pm to 11am. Those cacti lights are on the opposite side of the basement they are NOT under the ganja plant room or near the vent into the basement. The cacti lights simply add heat to the basement... secondly, the flower room is in the same room as my veg room will be.
The flower room is a 10×10×9' room. I will divide it in half and use a 5x10×9' portion for flower. Two 1000w lights only.
The other half will be for my veg. I only have 6-8 small plants in 1gallon pots going at the most. So at most I run 1 maybe 2 T5 4bulb lights for my veg. That covers the catches
Now I'm thinking of having the floor vent be my intake. And my exhaust will be the window disguised properly of course. The basement will have a small lung room for my air conditioner to sit in. The ac will exhaust out the dryer vent hole... I will cap off one end to the ducting so my furnace doesn't blow hot air into the basement.
The other end I will attach my 6" hyper fan for the intake. Ac will be manually adjusted I have no environment control unit as of yet. This way heat from the ac won't be a problem in the grow room.
Or I can simply pull air from outside and push it into the flower room via the vent in the floor with the 6inch fan on a speed controller..?
Also this way the air being moved through my reflector will be whatever temp my room is.
Would it be better to intake from outside via the window or dryer vent? If I were to do either one of these options my account wouldn't be able to have a lung room. Without making a hole in the floor which I can't do.
I do plan to get a carbon filter also I have the extra cfms for it already accounted for.
Thoughts appreciated
Attachments
Last edited: