tokersmoke
Member
mh does put out less lumens then hps.The thing is lumen numbers have nothing to do with plant growth.Light intensity in regards to plant grow is measured by PAR
In the same way fat provides the most efficient calories for humans, red light provides the most efficient food for plants. However, a plant illuminated only with red or orange light will fail to develop sufficient bulk. Leafy growth (vegetative growth) and bulk also require blue light. Many other complex processes are triggered by light required from different regions of the spectrum. The correct portion of the spectrum varies from species to species. However, the quantity of light needed for plant growth and health can be measured, assuming that all portions of the spectrum are adequately covered. Light for plants cannot, however, be measured with the same standards used to measure light for humans. Some basic definitions and distinctions follow that are useful in determining appropriate ways to measure the quantity of light for hydroponic plant growth.
Watts is an objective measure of energy being used or emitted by a lamp each second. Energy itself is measured in joules, and 1 joule per second is called a watt. A 100 watt incandescent bulb uses up 100 joules of electrical energy every second. How much light energy is it generating? About 6 joules per second or 6 watts, but the efficiency of the lamp is only 6%, a rather dismal number. The rest of the energy is dissipated mainly as heat. Modern discharge lamps like high pressure sodium (HPS) and metal halide convert (typically) 30% to 40% of the electrical energy into light. They are significantly more efficient than incandescent bulbs.
Since plants use energy between 400 and 700 nanometers and light in this region is called Photosynthetically Active Radiation or PAR, we could measure the total amount of energy emitted per second in this region and call it PAR watts. This is an objective measure in contrast to lumens which is a subjective measure since it is based on the response of the subjects (humans). PAR watts directly indicate how much light energy is available for plants to use in photosynthesis.
The output of a 400 watt incandescent bulb is about 25 watts of light, a 400 watt metal halide bulb emits about 140 watts of light. If PAR is considered to correspond more or less to the visible region, then a 400 watt metal halide lamp provides about 140 watts of PAR. A 400 watt HPS lamps has less PAR, typically 120 to 128 watts, but because the light is yellow it is rated at higher lumens (for the human eye).
"Illumination" for plants is measured in PAR watts per square meter. There is no specific name for this unit but it is referred to as "irradiance" and written, for example, as 25 watts/square meter or 25 w/m2.
Plants "see" light differently than human beings do. As a result, lumens, lux or footcandles should not be used to measure light for plant growth since they are measures used for human visibility. More correct measures for plants are PAR watts, PPF PAR and YPF PAR, although each in itself does not tell the whole story. In addition to quantity of light, considerations of quality are important, since plants use energy in different parts of the spectrum for critical processes.
Interesting read.Been reading since i saw this thread.
In the same way fat provides the most efficient calories for humans, red light provides the most efficient food for plants. However, a plant illuminated only with red or orange light will fail to develop sufficient bulk. Leafy growth (vegetative growth) and bulk also require blue light. Many other complex processes are triggered by light required from different regions of the spectrum. The correct portion of the spectrum varies from species to species. However, the quantity of light needed for plant growth and health can be measured, assuming that all portions of the spectrum are adequately covered. Light for plants cannot, however, be measured with the same standards used to measure light for humans. Some basic definitions and distinctions follow that are useful in determining appropriate ways to measure the quantity of light for hydroponic plant growth.
Watts is an objective measure of energy being used or emitted by a lamp each second. Energy itself is measured in joules, and 1 joule per second is called a watt. A 100 watt incandescent bulb uses up 100 joules of electrical energy every second. How much light energy is it generating? About 6 joules per second or 6 watts, but the efficiency of the lamp is only 6%, a rather dismal number. The rest of the energy is dissipated mainly as heat. Modern discharge lamps like high pressure sodium (HPS) and metal halide convert (typically) 30% to 40% of the electrical energy into light. They are significantly more efficient than incandescent bulbs.
Since plants use energy between 400 and 700 nanometers and light in this region is called Photosynthetically Active Radiation or PAR, we could measure the total amount of energy emitted per second in this region and call it PAR watts. This is an objective measure in contrast to lumens which is a subjective measure since it is based on the response of the subjects (humans). PAR watts directly indicate how much light energy is available for plants to use in photosynthesis.
The output of a 400 watt incandescent bulb is about 25 watts of light, a 400 watt metal halide bulb emits about 140 watts of light. If PAR is considered to correspond more or less to the visible region, then a 400 watt metal halide lamp provides about 140 watts of PAR. A 400 watt HPS lamps has less PAR, typically 120 to 128 watts, but because the light is yellow it is rated at higher lumens (for the human eye).
"Illumination" for plants is measured in PAR watts per square meter. There is no specific name for this unit but it is referred to as "irradiance" and written, for example, as 25 watts/square meter or 25 w/m2.
Plants "see" light differently than human beings do. As a result, lumens, lux or footcandles should not be used to measure light for plant growth since they are measures used for human visibility. More correct measures for plants are PAR watts, PPF PAR and YPF PAR, although each in itself does not tell the whole story. In addition to quantity of light, considerations of quality are important, since plants use energy in different parts of the spectrum for critical processes.
Interesting read.Been reading since i saw this thread.
