W
wanteng
Hi mijn vried!
I'm showing how is made my Grow Room.
Mother ROOM:
I use a 1sm x 2H room, with a Electronic Sonlight Ballast, long-gross Blue reflector and MH250w Sonlight Bulb over 5 AK48 and 1 BlueBerry.
The room is covered by a black\white film, and a Diamonds Mylar.
For the floor i've created a kinde of insulation with Iron Pannel and kitchen carpet. In this way i can also keep all cable passing under the grow.
The day temperature is fixed on 23°C and the moistness is 30%, that's why I must use a Hot-air Fan, connected with a moist-generator and a controller, so when the hot-fun turn on also the moist generator does this. However I'll try to use a wet towel to get more moist.
In the night the temperature in around 17°C.
A fan (just to move the air and to get stronger the plant) and extractor work every 30minutes for 15minutes.
For watering I use a Bluemat System connected with a reservoir (90liters) that I also use as Bubbler for the clones.
I prefer long square pot (30L X 15W X 16H) to get the soil more airly.
QUESTION:
Can I get more than 80 Clones from 6 plant every 50 days?
The Blooming ROOM: (waiting for clones)
The photo will be come!However the ROOM is about 150L x 150W x 2H with a Electronic Sonlight Ballast, a Philiphs HPS600w GreenPower and Adjust-a-Wing Reflector.
This room was made in the same way of the Mother room, so black\white film,diamonds mylar and "iron floor".
I'll use 16 of 80L*20W*16H Long sqare pot with 5 clones each.
Watering will be with blumat system asweel (this system is really useful but however too expensive).
QUESTION:
Can I grow more than 5 clones in that pot?
The Clones "room"(bubbler):
In the 90L reservoir, I use an air pump.
In this way I can improve the oxy of the mother watering and also use it as bubbler propagator, under an Envirolite RED 200W and a plastic film (better than white for propagation).
Like this
I'm showing how is made my Grow Room.
Mother ROOM:
I use a 1sm x 2H room, with a Electronic Sonlight Ballast, long-gross Blue reflector and MH250w Sonlight Bulb over 5 AK48 and 1 BlueBerry.
The room is covered by a black\white film, and a Diamonds Mylar.
For the floor i've created a kinde of insulation with Iron Pannel and kitchen carpet. In this way i can also keep all cable passing under the grow.
The day temperature is fixed on 23°C and the moistness is 30%, that's why I must use a Hot-air Fan, connected with a moist-generator and a controller, so when the hot-fun turn on also the moist generator does this. However I'll try to use a wet towel to get more moist.
In the night the temperature in around 17°C.
A fan (just to move the air and to get stronger the plant) and extractor work every 30minutes for 15minutes.
For watering I use a Bluemat System connected with a reservoir (90liters) that I also use as Bubbler for the clones.
I prefer long square pot (30L X 15W X 16H) to get the soil more airly.
QUESTION:
Can I get more than 80 Clones from 6 plant every 50 days?
The Blooming ROOM: (waiting for clones)
The photo will be come!However the ROOM is about 150L x 150W x 2H with a Electronic Sonlight Ballast, a Philiphs HPS600w GreenPower and Adjust-a-Wing Reflector.
This room was made in the same way of the Mother room, so black\white film,diamonds mylar and "iron floor".
I'll use 16 of 80L*20W*16H Long sqare pot with 5 clones each.
Watering will be with blumat system asweel (this system is really useful but however too expensive).
QUESTION:
Can I grow more than 5 clones in that pot?
The Clones "room"(bubbler):
In the 90L reservoir, I use an air pump.
In this way I can improve the oxy of the mother watering and also use it as bubbler propagator, under an Envirolite RED 200W and a plastic film (better than white for propagation).
Like this
