What's new
  • ICMag with help from Phlizon, Landrace Warden and The Vault is running a NEW contest for Christmas! You can check it here. Prizes are: full spectrum led light, seeds & forum premium access. Come join in!

Footsteps In Becoming an Expert Grower

Boo

Cabana’s bitch
Veteran
It sounds like you’ve got the next year or two of your life all planned out. I hope everything goes as well as you have it anticipated. I prefer to grow much more simple and do everything by hand. I haven’t done much different in the last 24 years of my growing habits And I’m fine with that. I’ll keep an eye out on your grow and follow up on what you’re
 

Biosystem

Well-known member
It sounds like you’ve got the next year or two of your life all planned out. I hope everything goes as well as you have it anticipated. I prefer to grow much more simple and do everything by hand. I haven’t done much different in the last 24 years of my growing habits And I’m fine with that. I’ll keep an eye out on your grow and follow up on what you’re
Thanks, man. I'm just hoping the hiccups and errors along the way aren't too egregious. Nothing goes perfectly, so we just have to shoot for excellent.
 
  • Like
Reactions: Boo

Biosystem

Well-known member
Micro clover is really nice for a cover crop but the seeds are a little pricey. I got mine from outsidepride dot com.

I did a couple soil growers with big totes but settled on pots, bags 5 gallon or smaller. I can't grow a tropical sativa in the same container as an indica dominant poly hybrid and keep both of them happy. Plus individual pots make much easier to keep from over watering using the pot weight method.

Seedlings and damp off: I never had a problem using this method. Start with Solo cups with drainage holes, use a seedling mix, moisten well with PH adjusted water, plant your seed and cover with a plastic sandwich bag. Put the Solo cups in a 5 gallon bucket. Get a clamp light with a reflector from home depot. The 5 gallon bucket narrow enough to keep the reflector from sitting on top of the cups. The light warms the top of the soil and plastic bag keep the soil moist enough until they break ground. Check daily and remove the plastic bags as they emerge.

Simple easy cloning: Warming mat, bowl of water larger than a paper plate, styrofoam plate, Aquarium air stone and air pump. Put a bowl of PH adjusted water on the warming mat, drop the air stone in the water, make holes in the plate for the cuttings, get at least 1/2" of the cutting through the bottom of the plate. Float the plate on the bubbling bowl of water. No humidity dome , no nutes or rooting hormones needed. keep the air temps above 70.
That has been the seedling method I've used with best luck so far. I want to get some practice with this method a bit because I will be doing breeding projects later on that will be using many many seedlings, so being able to sprout and manage them in easily moveable, preppable, transplantable pucks like this seemed very useful. I may end up going back to the old methods but if I can nail down this one it'll be easier and better in the long run (for my purposes and growing style/space).

The clone method is interesting, and I'll have to see about running some tests with that. The cloner I have seems to run well, but to your point, I think temperatures are staring to impact it, so a heat mat is a good idea, and I am probably letting too much of the stem stick out from the bottom (2-3" stickout as opposed to 1-1.5").
 

Biosystem

Well-known member
WEEK 4 OF FLOWER
Zamaldelica by ACE Seeds

Things are going pretty well. The females are coming along nicely and reacting to the LST with great vigor.

The males are doing okay. The light is proving to be a bit much for them so I moved it up AGAIN.

More fertilizer to be added to the soil soon. Things are going good, y'all. Just checkin' in.
 

Attachments

  • PXL_20241202_223803078.jpg
    PXL_20241202_223803078.jpg
    5.1 MB · Views: 19
  • PXL_20241202_223828755.jpg
    PXL_20241202_223828755.jpg
    5.7 MB · Views: 18
  • PXL_20241202_223835182.jpg
    PXL_20241202_223835182.jpg
    4.8 MB · Views: 14
  • PXL_20241202_223841612.jpg
    PXL_20241202_223841612.jpg
    5.4 MB · Views: 16
  • PXL_20241202_223849423.jpg
    PXL_20241202_223849423.jpg
    3 MB · Views: 17

Biosystem

Well-known member
Odds and ends with cloning Zammies and sprouting Event Horizon. Those totes have a bunch of scraps and such buried at the bottom. Worms have been added, and cover crop seed has been spread to begin fostering more microbial life.
 

Attachments

  • PXL_20241202_223653909.jpg
    PXL_20241202_223653909.jpg
    5.1 MB · Views: 8
  • PXL_20241202_223650624.jpg
    PXL_20241202_223650624.jpg
    4.3 MB · Views: 9
  • PXL_20241202_223648260.jpg
    PXL_20241202_223648260.jpg
    4 MB · Views: 10
  • PXL_20241202_223643993.jpg
    PXL_20241202_223643993.jpg
    4.1 MB · Views: 10

gedLang

Well-known member
Looking good! A lot of beautiful green. That top plant in the first picture has some crazy clawing going on.

It looks like you are cloning from plants in flower - is that any more difficult than from veg? I have not tried doing that.
 

Biosystem

Well-known member
Looking good! A lot of beautiful green. That top plant in the first picture has some crazy clawing going on.

It looks like you are cloning from plants in flower - is that any more difficult than from veg? I have not tried doing that.
Yes, indeedy. Those are the sts reversed plants in a separate tent. I suspect the light is agitating them greatly in there, or perhaps it is the STS. I don't know, I have never selfed a plant before this, nor have I used this tent.

As to flowering clones, I just take them and root them when I prune the suckers that sprout during the flip to flower. I seem to have the same success rate with them as I do in veg. Personally I like veg clones more because you can control the number of branches you have WAY more easily, and the plant doesn't waste a ton of energy throwing bract material on the site where it was flowering before (even if it's in the damn shade).
 

Biosystem

Well-known member
Some updates:

My seedlings are running great! Strains will be listed once I know who will make it and who won't.

The Zamaldelica reversed plants seem to have stopped producing male flowers for some reason, and they are also molding. I expect the plants will need to be scrapped entirely and restarted (possibly). Very frustrating but not the end of the world. Live and learn. I can't get away with this small tent without a fan in it. It's just too small and prone to humidity issues. Oh whale!
 

Attachments

  • PXL_20241205_200631779.jpg
    PXL_20241205_200631779.jpg
    1.9 MB · Views: 7
  • PXL_20241205_200624087.jpg
    PXL_20241205_200624087.jpg
    3.2 MB · Views: 7
  • PXL_20241205_200217974.jpg
    PXL_20241205_200217974.jpg
    3.7 MB · Views: 8
  • PXL_20241205_200212962.jpg
    PXL_20241205_200212962.jpg
    4.2 MB · Views: 7

Biosystem

Well-known member
WEEK 5 OF FLOWER
Zamaldelica by ACE Seeds

They seem to be doing quite well still. The reversed males seemed to fail their reversal due to mold and possible misapplication of STS. Unsure of why it is such a problem with them, but I will need to revisit this process.

Anyone with solid experience in making S1 seeds, please DM me if you want to share your knowledge and improve the world.

The clones and seedlings are doing rather well. Some troubles with getting some very old seeds to make it all the way, but the rates aren't bad given how old they are! Just plugging along over here, waiting on plants to grow! This species is so awesome!
 

Attachments

  • PXL_20241209_204032961.jpg
    PXL_20241209_204032961.jpg
    6.1 MB · Views: 11
  • PXL_20241209_201615480.jpg
    PXL_20241209_201615480.jpg
    4.1 MB · Views: 9
  • PXL_20241209_201621537.jpg
    PXL_20241209_201621537.jpg
    4.7 MB · Views: 9
  • PXL_20241209_201610579.jpg
    PXL_20241209_201610579.jpg
    4.1 MB · Views: 13

Biosystem

Well-known member
WEEK 6 OF FLOWER
Zamaldelica by ACE Seeds

They're doing great! Looks like the nitrogen sensitivity has kicked in starting this week, but it isn't severe yet. Not fertilizing with nitrogen, and I haven't since the early part of last bloom at the soonest.

They smell so good already. I'm still excited to see how the flowering time compares what with this one starting at 11/13 light cycle right out of the gate as opposed to last bloom which was only flipped to 11/13 at week 10 or so.

I seem to have some kind of big-chomper pest, like a caterpillar or something. Photos in the subsequent post. I'll need to figure out some kind of trap for it because I can't find the bastard.
 

Attachments

  • PXL_20241216_184148812.jpg
    PXL_20241216_184148812.jpg
    3.3 MB · Views: 9
  • PXL_20241216_184054786.jpg
    PXL_20241216_184054786.jpg
    3.2 MB · Views: 10
  • PXL_20241216_184049363.jpg
    PXL_20241216_184049363.jpg
    5.8 MB · Views: 9
  • PXL_20241216_184040634.jpg
    PXL_20241216_184040634.jpg
    5.6 MB · Views: 10
  • PXL_20241216_184030588.jpg
    PXL_20241216_184030588.jpg
    5.6 MB · Views: 9

Biosystem

Well-known member
The bitten leaves are from the bloom tent. The other photos are of the clones and seedlings in the veg tent.

Y'all, I say this all the time, but I love this species so much. This is the most fascinating and rewarding hobby of my life. Just growing it is a pleasure. Getting to eat it or smoke it at the end is just an amazing bonus.
 

Attachments

  • PXL_20241216_183131202.jpg
    PXL_20241216_183131202.jpg
    3.7 MB · Views: 8
  • PXL_20241216_183126998.jpg
    PXL_20241216_183126998.jpg
    4 MB · Views: 9
  • PXL_20241216_183122699.jpg
    PXL_20241216_183122699.jpg
    5.2 MB · Views: 9
  • PXL_20241216_184105214.jpg
    PXL_20241216_184105214.jpg
    3.1 MB · Views: 11
  • PXL_20241216_184112523.jpg
    PXL_20241216_184112523.jpg
    3.1 MB · Views: 7
  • PXL_20241216_184120480.jpg
    PXL_20241216_184120480.jpg
    3.4 MB · Views: 7

Biosystem

Well-known member
Nice jungle, hard to spot the plants in there. :biggrin:

From the pictures i guess you have a grasshopper hiding somewhere.
Maybe a trap with molasses?
Thanks, man! Can you believe every Monday I crush all of the cover crop foliage in big wads above their roots to hamper their growth and prevent them from competing with the stars of the show? They just won't stop - but that's a good thing. I want them there to help keep the system as biologically active as possible. I do think I will switch to clover only, or at least short plants only, after I finish this bag of cover crop seed. That will take a few years though I reckon.

I will definitely try a molasses trap of some kind. And the best part? After use, I can just dump the whole thing on the soil, and it's just more microbe food. This bug doesn't know what's coming, man. Hahaha
 

Biosystem

Well-known member
WEEK 7 OF FLOWER
Zamaldelica by ACE Seeds

Still running 11/13. The calcium fert I made seems to be too much for the crappy plants on the side, but that's okay. They obviously weren't going to do much of anything anyway, and now I know to revisit and dilute that mix.

Things are going well!
 

Attachments

  • PXL_20241223_194805010.jpg
    PXL_20241223_194805010.jpg
    5.6 MB · Views: 4
  • PXL_20241223_194800802.jpg
    PXL_20241223_194800802.jpg
    3.6 MB · Views: 4
  • PXL_20241223_194757346.jpg
    PXL_20241223_194757346.jpg
    3.4 MB · Views: 4
  • PXL_20241223_194753896.jpg
    PXL_20241223_194753896.jpg
    3.3 MB · Views: 4
  • PXL_20241223_194750793.jpg
    PXL_20241223_194750793.jpg
    3.2 MB · Views: 4
  • PXL_20241223_194744412.jpg
    PXL_20241223_194744412.jpg
    6 MB · Views: 4
  • PXL_20241223_194256817.jpg
    PXL_20241223_194256817.jpg
    5.8 MB · Views: 4

Biosystem

Well-known member
Some pics of what's going on in the veg tent.
The dead/dying plants in flower are the ones that got burned in the flower tent. It is what it is.
 

Attachments

  • PXL_20241223_194304544.jpg
    PXL_20241223_194304544.jpg
    5.5 MB · Views: 2
  • PXL_20241223_194311078.jpg
    PXL_20241223_194311078.jpg
    3.4 MB · Views: 2
  • PXL_20241223_193438006.jpg
    PXL_20241223_193438006.jpg
    4.8 MB · Views: 2
  • PXL_20241223_193436292.jpg
    PXL_20241223_193436292.jpg
    5.3 MB · Views: 3
  • PXL_20241223_193433911.jpg
    PXL_20241223_193433911.jpg
    5.1 MB · Views: 3
  • PXL_20241223_193441394.jpg
    PXL_20241223_193441394.jpg
    2.4 MB · Views: 3
Top