Flood Table Tray Repair?

[purpz]

I just purchased a used 4x8 white flood tray. There are already holes cutt out on the side, I want to put new holes in the front end and patch the original ones. Anyone have any experience/ideas on repairing a hole?

 

[Pops]

I had a 4 x 8 black tray that had a long crack in it. I went to Wal-Mart and got a fiberglass repair kit for a car. It worked great on the tray. I am not talking about Bondo, but the kit with fiberglass cloth and resin.

 

[pontiac]

get some aquamend epoxy, I believe they sell it in homedepot.

 

[moses224]

yes epoxy..im currently building some tables and will finalize with epoxy

 

[thecarguy]

epoxy plus a piece of pond liner to patch the hole worked well for me. shit, silicone and a piece of pond liner works for me too.

 

[DiscoBiscuit]

rubber stoppers?

 

[Pseudo]

all those might work, but i wouldnt use any of them, the only thing i would use is Plastic Weld, it is found in the epoxy section, rough up area w sandpaper, you can use any plastic from the recycling bin for the patch, and you wil never have to mess with it again, i promise