fc 4800 padre sereno garden #marshydro13th #marshydro

[hazepadano]

hi friends, after the first satisfactory experience with marshydro fc e3000, i decided to try the fc 4800.
box 100x100
12 glueberry (for now!)
I foresee vegetation for a few weeks at 50% of the power then we'll see

 

[hazepadano]

the fc e 3000 has been modified and destined to the vegetation box 100x50x180

 

[gizmo666]

good luck with your grow

 

[exploziv]

Have a great grow!

 

[Mars Hydro Led]

the fc e 3000 has been modified and destined to the vegetation box 100x50x180

a creative way

 

[hazepadano]

the first week is almost gone, irrigated and moved the plants according to the morphology.
looks fine, in a bit too much.
I gave a reinforcement of n and n bottarella of epsom salts.
led at 40 cm (it makes me want to lower it a bit) 50% power.
26 degrees rh 60%

in vegetation the sawed fce3000 performs well!
also at 50% power, here the distances decrease to 15 cm
here too in a bit too much.
26 degrees rh 60%

 

[Entusia]

[..] and a bottarella of epsom salts.

I laughed a lot at this untranslated italian term
Also, Hazepadano, you're a national treasure and legend... sawing a light in half and posting it on the vendor forums isn't something anyone can pull off

 

[Mars Hydro Led]

I laughed a lot at this untranslated italian term
Also, Hazepadano, you're a national treasure and legend... sawing a light in half and posting it on the vendor forums isn't something anyone can pull off

I have confirmed with our engineer. to saw the FCE-3000 in half is available. But to use them vertically, the wire needs to be extended. There is potential risk of burn or fire. so if it is not necessary, we don't suggest growers to do like this.

 

[GMT]

Oh I see, we get Italian in my thread and English in yours
No, seriously, the trick with the saw, genius.

 

[hazepadano]

after 10 days the plants seem to me beautiful in shape, I have not yet touched anything, lamp always in the same position (the plants have risen almost 10 cm) always 50% power.

 

[hazepadano]

noticed the shoes were getting tight I racked in 6.5 liters and pruned. I patched and cleaned low branches. having a slightly leafy genetics I followed the example of halogen and I cut the leaves without detaching them. the aim was to reduce transpiration, improve the flow of air and also properly illuminate the secondary branches (having patched).
some photos before and after pruning and decanting

 

[hazepadano]

the box at the moment, lamp always at 50%
the sticks are 90 cm high

 

[Entusia]

the box at the moment, lamp always at 50%
the sticks are 90 cm high

The "trimpadano" technique

 

[hazepadano]

3 weeks have flown!
I go on to vegetate I think at least another couple of weeks.
I pulled out one at random, they are all wonderfully the same

 

[Mars Hydro Led]

They look energetic

 

[hazepadano]

started the fourth day I think it will be possible to clean up and go 12/12 in 120x120.

the lamp is 25 cm from the tops at 60% power, temperatures in the order of 28 degrees ur 60-70%

 

[hazepadano]

end of the first part, finished the vegetation, gave a nice month, let's start the middle age, the extension!

 

[hazepadano]

come out clean and pruned the plants, I put 12 3x4
plant just released, comparison between pre and post pruning plant (on the left the one already pruned)

 

[hazepadano]

beginning of the second part
disassembled the box 100x100 I am placed in half 120x240, so we are in 120x120.
for one or two weeks they will share the box with a ride under hps (now 400 watts on the right), later I will take another fc 4800 lamp and goodbye hps

 

[exploziv]

Prepare for big jungle!