What's new
  • ICMag with help from Landrace Warden and The Vault is running a NEW contest in November! You can check it here. Prizes are seeds & forum premium access. Come join in!

DIY Aero Cloner the EZ-Cloner Replica in 10 Easy Steps!

LiLWaynE

I Feel Good
ICMag Donor
Veteran
german_aero said:
When you use only tap water it is also important to take care of pH and ppm as using nutrients?

from what i understand, an ideal ph is only necessary for nutirent uptake.
clones do not need nutrients. they just need moisture.

i was instructed by some dumb ass hydro shop owner to put a little bit of nutes in my cloner. i knew it wasnt going to be good, but decided to do it anyways just to see if he was right. so i tried it and it blows. like 004 said, it makes the stems mushy and kills the cuttings.

so now i just use straight tap water out the faucet. no ph. no nutes.
 

Big Bud Bear

Grow your own, and you got the best bone
Veteran
where can i get these plugs? what are they called?

3890AeroStems-thumb.jpg
 

LiLWaynE

I Feel Good
ICMag Donor
Veteran
^ i dont know why that guy glued those neoprene plugs into that top. you have to be able to pull them out in order to keep the roots in tact.
 

Big Bud Bear

Grow your own, and you got the best bone
Veteran
LiLWaynE said:
^ i dont know why that guy glued those neoprene plugs into that top. you have to be able to pull them out in order to keep the roots in tact.
thanks, i don't know why either :bashhead:
 

00420

full time daddy
Veteran
LiLWaynE said:
^ i dont know why that guy glued those neoprene plugs into that top. you have to be able to pull them out in order to keep the roots in tact.

thanks, i don't know why either

i would think its to help with water control & to hold in place ? as u can see clearly it is not glued 100% it is only on the back sides of the neoprene not where the slit is im sure he can pull hiz rooted cuts out just fine
 
two questions:

1. Most of you use 1/2" pvc pipes. Isn't it right that if you use thinner pipes the pressure would exceed and the misters spray finer? So why not using thinner pipes?

2. How do you get air in the res? I think if all sites are used with cuttings the res will be quite airtight. The original ez cloner has an airpump. So is the airpump necessary?
 

LiLWaynE

I Feel Good
ICMag Donor
Veteran
00420 said:
i would think its to help with water control & to hold in place ? as u can see clearly it is not glued 100% it is only on the back sides of the neoprene not where the slit is im sure he can pull hiz rooted cuts out just fine


yeah that makes sense... he probably sheered off too big of a hole and the pl plugs wouldnt stay in place so he ghetto rigged it with some Supa Glue.

im going to be making two 100 site cloners here in the next day or so... ill be sure to add them...

they are going to be the new norm for the icmag HOOD.
 

mr freez

Member
do u guys think it possible for me to grow clones using ebb and flo tray with a dome by placing the cuttings in hydroton pellets and flooding every 15 min?
 

00420

full time daddy
Veteran
mr freez said:
do u guys think it possible for me to grow clones using ebb and flo tray with a dome by placing the cuttings in hydroton pellets and flooding every 15 min?

yes it is
 

InjectTruth

Active member
That dude didnt glue them in, he used the glue to make a "seat" so the plugs didnt fall in.


P.S. Im not sure why everyone uses 2" holes, as Ive found 1" to be way more than sufficient. My bubble cloner has pencil sized holes, so to me even 1" is big.

Its way more efficient that way. I just put 80+ sites on a 18 gallon roughneck. Be like Eddy Lepp, triple up each site, and you got mad clonage.
 

LiLWaynE

I Feel Good
ICMag Donor
Veteran
The Inspector said:
Anyone who says they screwed a red EZ Clone Mister 360 in without use of metallic tapping aids has not made a cloner. This plastic can't thread PVC, I don't care what size hole you drill. Need further threading.


brah, you can check out my garden for proof that it works.

i drilled with a drill bit and never glued pvc together...

im just that damn good ... peace
 

InjectTruth

Active member
I made my first one without a tap. Just worked the hole with a dremel bit, widening it bit by bit, and screwed them in with my hands. Hurt like hell, had to force all my weight on it while screwing it in. But it did work. On some of the holes, I took a big screw, and used that as a ghetto threader, but not on all of them.

Yes, a tap makes it 1000x easier, and for 4 bucks, why not? But to call people liars over PVC? Chill...
 

t-mo

New member
wow man if having to solve the problem of how to fit a mister into a hole is like killing yourself maybe u should just go buy a ready maid cloner for like 3 or 4 hundred dollars. have u ever used a drill before???? and what do there icons have to do with anything ??? like i said go buy a cloner!!!!!!! the "diy" cloner thread should only be attempted if u have "basic" problem solving skills.keep up the good work guys!!! bye the way 100% success rate and i didnt need to tap the holes with red ezclone misters
 

pineappaloupe

Active member
Great thread. I used this info to build my own.
I used a 21gal rubbermaid, with an ecoplus 396gph pump, and 16 misters in the double box configuration. i bought the Ez Cloner neoprene plugs and used a 1 5/8 inch hole driller to make the holes. A 1 3/4 inch bit would have been much better but it wasnt in stock.


As for leaks... well at first it was bad. So i bought some rubber weatherstripping. No improvement at all. Then i had the idea to stop the water before it gets to the crack.

I made a skirt out of a 6" wide strip of poly, attaching it to the lid permanently with a hot glue gun. It works perfectly so far. My only concern is that is it adds more surfaces that need to be kept clean, but it is strong enough that i can probably put it in the dish washer.





 
Last edited:

salgjkhaf

Member
my momma closet is only 2 ft tall, yall think i could get one of these set up for for a height maximum of 10 inches from bottom of tub to lid? and put 4 clones in it? i mean thats pretty damn small.
 

t-mo

New member
hey inspector ur a real ass@#$% it isnt a fake name i just didnt see a need to post until i read ur post.your right its just a big conspiracy against u.just trying to make ur life hard so u had to make another trip to the depot to get a tap.....are u fur real...why would these guys waste there time teaching people how to make a cloner just to not tell them about a tap.if it was nessecary it would be mentioned.i built mine with no tap and no problems.ok fine everyone should buy the tap{evanthough its not needed ,but i dont want the inspector to have a fit} are u happy now?????ass!@#$.why would someone go through the trouble of making a fake name just to sell someone on not buying a tap.look at my join date ass!@#$.some people go out of the way to help others[thanks everyone here for the helpfull info]others go out of there way to be an ass!@#$ .inspector u are surly the latter.if u have already finished your cloner then why r u still here......oh yea trolling, go start shit somewhere else and let these guys help people.AGAIN NO TAP NEEDED!!!!!!!! another public service annocment brought to u by
the dont buy taps union of america......
lol......
 
Top