BC's 150 watt HPS/T5 Scrog Cab

[BC Chronic]

Thanks hazydreamsI am impressed with this strain too...the buds are already heavy and there's at least 25 days left..she is one of the heaviest feeders I've ever seen too....
Hey micro420guy!! thanks!! I top feed so all the old crap in the soil gets cleansed every new water/feeding..she drinks up 3-4 litres of water/food every second day..its a wide, flat tub so evaporation is quick..
the container I'm using is a flat 12 litre tub I got from WallyWorld..so 3-4 gallons of soil can easily fit in even with an inch of aquarium gravel at the bottom..hope this helps my friend I even adapted the lid as something to collect runoff..
I'm putting on the back and drilling all the 4 to 4.5 inch holes today...drilling a big hole through 3/4 inch MDF isn't the easiest..lol...man it takes 20 minutes for 1 hole...
she's all painted too so I will come back tonight with lots of pics!
Thank you everyone and I hope Spring Break was fun for all

 

[Chomp]

Hey BC it sounds like your hole saw (if that's what you're using) is fried if it's taking that long! It's a good idea to go very slow with a hole saw, if the drill has a low speed use that (with a new saw) or ease off on the trigger and make it go slow....If you go at top speed the saw will burn up quick, then you basically burning through the wood instead of sawing....

You're doing a great job on the new cab so far! Can't wait to check out the finished product bro

Chomp

 

[BC Chronic]

Hey Chomp...Thanks for the info...I guess I'm Mr.Rightnow or something...lol...no wonder the wood was burning...slow and steady wins the race from now on Chomp! The hole bit is brand new...it was me ramming it into the MDF....I've gotta quit toking so much before I work on the cablol
i'm putting the back on now then I'll post some pics...
Thanks again!!

 

[DiscoBiscuit]

Sounds like you're having a tough time. If your hole cutter is sheet metal with hack saw-like teeth, holding it perfectly plum bottoms out and doesn't cut effectively. The cutter gets hot and is much less effective. If you're using a hand drill, you can carefully rock the cutter a degree or two off plum and the cutter will bite. Obviously you can't continue even at that slight angle variation for more than a moment. If needed, alter the angle variation to the opposite side of the hole, evening out the variation. Not unlike balancing a wheel on the hub when you have a flat. This is not likely to leave you a compromised hole because wood tolerances are much more forgiving than metal.

The adjustable hole cutters don't have this problem because it's harder to hold em perfectly plum. Slight hand tremors are enough to keep the bit biting vs stalling. These are a bit more dangerous, especially with a hand drill. Watch them knuckles.

The SB's looking great. Have a nice weekend.


EDIT: You may already know this. If your hole cutter has a center bit, you can cut half way through on one side, flip the board and finish the hole on the other side. This keeps the cutter from chipping the mdf.

 

[#1cheesebuds]

wow she is looking great. so how long r u gunna take her? looks to me like there is still some bloom time left.

anywase her trich r looking super dooper great.

 

[StupidBoy]

Stellar looking grow BC Can't wait to see how she smokes for you.

 

[BC Chronic]

Thanks for the help Disco!! It cut alot better...another problem was that its 3/4 inch MDF which is thick stuff..I used 1/2 inch for the back and front door which was easy-peasy to cut...
hey cheese!! Thanks bro..I think I will take her to Day 70 which is still 28 days...unless she's ready earlier but I doubt it too...
Thank you StupidBoy..missed ya around here!
hello my friends..
Today's Day 42 of bloom and the end of week 6...she's slower but the buds are exploding everyday..
I also worked my butt off on the cab so here goes with lots of pics

thats my tv remote..there are 2 buds that shot up taller than the others but I let them go...nummy

:yay:

here's some pics of the bottom/intakes

I'm using the PVC meant for inline vacuums...its bigger and has better airflow...

ready for flat black paint

I painted them flat black inside and out to reduce any light leaks...

here they are in their new home...I also painted the underside flat black...I'm putting on the last 1 later ( had to show pics first!!) plus more elbows on all 4...

I decidedon a 3 inch intake hole for the veg compartment...you'll see why later..What I want for this cab is complete stealth hence NOTHING that will be seen if anyone looks at it..I was going to use those pipes for back intakes but they always get knocked around when I moved the old cab this cab, hopefully, will be totally silent when the doors shut with no scrubber like this cab...its so obvious....lol...
I hope you like all the pics and I'm looking forward to any/all feedback/comments or help!!
Thanks everyone

 

[BC Chronic]

Hello hello
Today is day 45 of bloom...I'm still feeding her for this last week then water/mollasses from then on...she is really packing it on now and drinking 2 litres a day...
here are some pics to enjoy

the buds are starting to lean over...the triches are even bent over....

here you can see the 2 colas that overgrew the others...they are 12 inches tall..Thanks StupidBpoy!!

have'nt heard from anyone but I'm still looking forward to any feedback/comments!!
thanks everyone

 

[b00m]

:jawdrop: Holy Sativa Bud BC
God damn bruz every time I stop by in here, you are just killing it every time without fail
That Sharksbreath is one stunning plant and is going to provide you with some dank ass smoko
Can't wait to see what you do with your new cab mate

 

[Chomp]

Wow man very frosty buds...can't wait to see them when they really start to fatten up...it's looking like a great harvest is coming your way!

Chomp

 

[DiscoBiscuit]

I like two kinds of buds and you've got em both. Big gooduns and good biguns.

 

[Sgt.Stedenko]

Hey BC,
Those sure are pretty buds. Real nice strain there. Makes me want to drop a few beans of the Mandela Safari Mix or the Nirvana Master Kush I have. Last time, I had a couple of nice sat phenos.
The new cab is gonna be killer. How did the 400 in the bake-a-round go? It's a tight fit but with the right fan, it'll work.
Hope all is well.

 

[BC Chronic]

Thank you b00m..very nice to hear from you my friend...yeah this plant is amazing...she is exploding with 17-19 days to go..
Thanks Chomp
Thanks DiscoBiscuit!! I like my good-uns big too..
Thanks Sgt.Stedenko!!Love to see you grow those strains!!...I'm using a 115cfm AC fan to cool the 400 but I might use another to bring cool air in too...what do you think??
Hey everyone
I will be back tonight with pics..this will be her last feeding today too...she's on death row....lol...
I am having the hardest time finding a 4.5 inch hole bit...
I will be back ASAP

 

[heater76]

Holly F... buds getting bigger!!!beautifull sativa man, hows the smell?

 

[BC Chronic]

Thanks heater76..she smells like pineapple...musty pineapple..rather nice though...
Hello everyone!
here are some pics of Day 47(yesterday)...

I can't believe how thick the buds are getting

all she has to do now is get as round as the remotemight not happen but maybe my chatting with her will help...lol..

Hope you like the pics!!
I fed her for the last time too last night so she is now officially on death row
I will post more pics of my cab later tonight too..
Just finding a drill bit has been hard...small towns..ugh...lol..
Thanks again

 

[Sgt.Stedenko]

BC,
I bought my 4-1/2" hole saw online at McMaster Carr.
http://www.mcmaster.com/#hole-saws/=bl4ein
Based out of Cleveland and they ship real fast. Similar to Grainger.
115 cfm ought to be good enough for the cool tube, especially if you are using another fan for exhaust/scrubbing. I was going to suggest the S&P TD100X as a good match for the light. Similar cfm ratings.
Looking forward to the chop.
Cheers

 

[BC Chronic]

Hey Sgt!! thank you very much!! I have just ordered one!! lol...Even the rental store here doesn't have any!..lol...To tell the truth, I like the fan you showed me alot better too...next on the list..
I'm running out of things to build on my cab due to the drill bit crap but now thats started...I also built a DIY louver for the veg compartment so pics tonight!!
Hope you all don't mind my pic obsession....lol..
thanks again

 

[green.is.good]

Bc that is some frosty SB, excellent job!!! She looks like she is going to be a nice producer!! Defentily a strain I am adding to my list

 

[BC Chronic]

thank you green.is.good..I also have 1 seed (lol) called MobyDick which is even stronger, grows fatter buds but takes 10 or so weeks....thats going in the new cab!
Hey everyone
Today's Day 49 of bloom and the end of week 7....can't believe how fast its gone...2 more weeks to go
here are some pics to enjoy

some of the triches are all bent over and almost going a touch of amber at the very top...

you can see a few redhairs in this pic...

this is the bud I had my remote beside..it just may get as big

that far bud is almost touching the fan now...

bonehead cat does this everytime I open the door:kitty:...doesn't matter where she is either...its like that pounce commercial...
I hope you like the pics and I'm looking forward to hearing from you again
Thanks

 

[DiscoBiscuit]

uhoh, there's the cat... she likes it, so do I.