What's new
  • As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.
  • ICMag and The Vault are running a NEW contest in October! You can check it here. Prizes are seeds & forum premium access. Come join in!

Any use for old carbon filter media??

Tomatoesonly

Active member
With these filter scrubbers basically being throw away, because they seem to be so hard to refill ( ac infinity has a new refillable one now), but is there ANYTHING we can use the old filter media for?
Can it be used the same as BIOCHAR? Will it absorb good nutrients and kill plants?
 

Tom Kha Gai

New member
When I don't trust my old cabon filter anymore, it is still good enough for my kitchen. I use my old carbon filters in the kitchen for my self made kitchen hood until it is completely smeared with oil and fat.
 

Ca++

Well-known member
There are many stories (coming out of grow shops) about how hard they are to fill. The one's with big holes, and a net stocking inside, are more trouble. I can usually improve upon filters by rebuilding them though. The main failure I find, is taking up the slack with open cell foam. Which is why many work better with tape around the last 50mm each end.
You can't just pour it in. You have to stop and slap them about a bit, to settle them every 12" or so.
Some of the parts can also be repurposed as silencers, if that holds more value to you.
A lot of the carbon we chuck was virgin, but a lot isn't. The VOCs can be burnt off. I know Belgium has a place that refreshes it. Or pulverises it, heats it, and makes new filter products. Often with additives to capture specific industrial waste.

I baked some once. I didn't know it would glow, or that my grill door seal would toast so well. Some of the carbon in my grill, turned to white ash. I think I over cooked it a little. IIRC the target is around 300c
 

microbe621

New member
bonjour a tous, j avais lu sur un post icmag, un gars qui utiliser un generateur d ozone, et qu il epurer son filtre avec depuis au moins deux ans...pensez vous que cela puisse marcher?
 

Hiddenjems

Well-known member
There are many stories (coming out of grow shops) about how hard they are to fill. The one's with big holes, and a net stocking inside, are more trouble. I can usually improve upon filters by rebuilding them though. The main failure I find, is taking up the slack with open cell foam. Which is why many work better with tape around the last 50mm each end.
You can't just pour it in. You have to stop and slap them about a bit, to settle them every 12" or so.
Some of the parts can also be repurposed as silencers, if that holds more value to you.
A lot of the carbon we chuck was virgin, but a lot isn't. The VOCs can be burnt off. I know Belgium has a place that refreshes it. Or pulverises it, heats it, and makes new filter products. Often with additives to capture specific industrial waste.

I baked some once. I didn't know it would glow, or that my grill door seal would toast so well. Some of the carbon in my grill, turned to white ash. I think I over cooked it a little. IIRC the target is around 300c
To refresh you heat the old carbon in a vacuum furnace if you have one handy.
 

Orange's Greenhouse

Active member
It won't hurt to throw it in an outdoor garden.
You're sure about that? Activated carbon is famous for being full of heavy metals. For air filtering there's no need to use a special, clean kind.

Regarding the main question. Whats the point of reusing 50 cents worth of filter material? Just throw it out and look at other places to reduce your footprint on the world (e.g. not using high power lamps to grow vegetables).
 

Ca++

Well-known member
To refresh you heat the old carbon in a vacuum furnace if you have one handy.
Will a fan oven do? lol
I don't think that was in the article I read, but makes perfect sense. You gotta get them vaporised products out of the pores somehow. It won't all just float out. I was acutely aware of this when I torched the grill trying.


I wish it was 50c to fill one. I buy sacks from guys that send a pallet lorry. It's still around a third of the cost to buy another one. I do it mostly because of logistics. It means no shop visit, and less waste to find a home for. Them cylinders are big and obvious, and it's not legal here.
 

Douglas.Curtis

Autistic Diplomat in Training
Activated carbon from plant sources are low in heavy metals. At least 15% of the global supply comes from coconut. I can see coal and pitch derived carbon having issues.

Who made it? ;)
 

hillbil

Active member
I refilled 2 filters with AC Infinity carbon and both work better than new.
Do remember to tap, tap, tap until it wears you out
Wonderful product
I drop mine a few inches a couple hundred times while filling on plywood flooring.
I have 24” filters and have about 6 stops for bouncing on the way.
 
Last edited:

Latest posts

Latest posts

Top