-
ICMag with help from Phlizon, Landrace Warden and The Vault is running a NEW contest for Christmas! You can check it here. Prizes are: full spectrum led light, seeds & forum premium access. Come join in!
Aeroponic PC case scrog
- Thread starter Aerohead
- Start date
For what it's worth, I've heard of people using those 4 pin molex connectors with little to no modifying, when the straight pin connectors are unavailable. It's like they were made to fit those bulbs, it's uncanny.
In case you don't know what I'm talking about, it's these things you have in your computer:
In case you don't know what I'm talking about, it's these things you have in your computer:
I know this is in response to an old post, but for those still interested in an answer. You can see if 1000bulbs.com ships to your country.
2G11 4-pin sockets can be found:
http://www.1000bulbs.com/category/4-pin-2g11-compact-fluorescent-sockets/
Hope this helps.
Moreover, the connection near the terminal routinely heats up to about 180-190F. I wouldn't trust the plastic used on a Molex 8981 under that level of heat stress. They can and will arc and can start a fire. Very bad idea.
Vendor sold it before I got there.
It got snapped up so fast, I'm pretty sure it was a PC case grower who snagged it!
SweetDee
Member
Be very careful with the cheapest of sockets from 1000bulbs .they tend to have tabs inside the bulbs contacts that are not fully in contact with the bulbs and need to be bent out to work . The wire contacts will crap out also if used more then once and will also have to be built .talk about arcing . IT will pop and smoke and /or the bulbs just won't even come on . I replaced all the wiring before I started tracking down the other problems . IT sucked .
