Aeroponic Cannabis, a new project

[Cannebicaneser]

Photo of what the misting looks like at 94 PSI, using 0.2 mm misting nozzles. It's really great, the mist stays suspended inside the cubes for quite a while.

 

[Hiddenjems]

Photo of what the misting looks like at 94 PSI, using 0.2 mm misting nozzles. It's really great, the mist stays suspended inside the cubes for quite a while.

View attachment 19173230

I made a system like that with square buckets and misters in the lids. Pictures don’t do the misters justice.

 

[Cannebicaneser]

I made a system like that with square buckets and misters in the lids. Pictures don’t do the misters justice.

 

[Cannebicaneser]

Day 2, Growth
Today was all about adjustments. I thought the pumps were giving me 96 PSI, but it must be that when I ran the tests there was some air in the circuit. When I saw that pressure, I decided to install the two HPA pumps, but since I was missing some accessories, I couldn't install the gauges. And today, when I installed them, to my surprise, I found they were giving 160 PSI on each bank
So I turned off one pump, which I'll leave as a backup in case the other breaks, and I reattached the aluminum manifold. The result with one HPA pump was 116 PSI .
I also changed the oxygenation times because the water was heated to 24.5 Cº, and I went from 3 min/11 min to 1 min/15 min.
New misting times: 11 sec/3 min

Here's where I installed the gauges, to my surprise

And here the manifold and 1 pump at 116 PSI

 

[sneezydog]

That 160 looks to be more but the guage couldnt read it. Pretty set up good luck