What's new
  • As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.

A Guide to Fishsticks

Ph-patrol

Well-known member
Veteran
I grabbed a box of Holmes fans at a Estate sale and those suckers have been kicking for 4 plus years.I think I paid 5 bucks for a box of them.Nothing fancy but they keep going.
 

Ph-patrol

Well-known member
Veteran
I every once in a while I pull a fan out of the trash that the wife deems broken and clean crap wrapped around the fan shaft and cage.They are so high rpm they have very little torque to muscle through the hair or what not holding it back.If its still humming clean it.
Rather clean it than go to the store.
I can't sleep without a fan running.24/7
 

unregistered190

Senior
Veteran
The Honeywell fans from HD serve me well, no oscillating but in my little tent I don’t need that. I put one on the bottom pointing up and one above the lights pointing down.
 

unclefishstick

Fancy Janitor
ICMag Donor
Veteran
:tumbleweed:mornin campers...


sort of an exciting day...got trimming to do today...not excited about trimming of course,but it is good to finally have some sort of crop in...just a couple of weeks until the next batch comes out...just about back on track here finally...


got the mornin updates on the dangerbird crew...first group finished the northern loop yesterday after riding,and pushing,through the night over a pass that's basically all hike-a-bike...the second group should be back to town soon...the first 150 or so miles done...the first group should be into the last section by tonight and finish tomorrow...300+ miles in 4 days...almost all on trails or dirt roads...maybe 20 miles of pavement on the whole route...
 

dominicangreen

Weed Robot
Veteran
If people listen just pray wd40 and it will bring fan to life.sometimes you have to plug it in and help the blades turn till it moves again
 

Hammerhead

Disabled Farmer
ICMag Donor
Veteran
As pointed out if they are still humming u can get them to spin with help. Taking the front grill off is a PITA. Its only a matter of time before the motor locks up. WD40 wont fix that.


[YOUTUBEIF]6DIWKD9rmvU[/YOUTUBEIF]
 

bugman52

Bug Scissor Hand
Veteran
I have learned that the cannabis community in general is a caring, giving community that will look out for each other...auctions have begun for Milo's family. This account is being run by PUTSG so his main account remains safe.

View Image

I will be starting a thread detailing on how I make my FECO, getting pretty efficient with the method. Thinking I should send a sample off to have it tested so I know exactly how strong the oil really is.

Need a good CBD plant in rotation so full spectrum oil can be made

i got a high CBD/THC cut u can have Gorilla tonic & i just got a bunch of cbd/hemp seeds & a bunch of high cbd/thc hybird seeds if you want any.
 

Ph-patrol

Well-known member
Veteran
Most of the time a humming motor that needs a push is not a blown motor or a bad motor its a bad capacitor or bearings that need to be oiled.Good to no that for HVAC condensers.
A trane or carrier capacitor is around 16 bucks and takes 10 minutes to change.
a replacement condenser is about 2 grand.

Big fans and small all work the same.
 

unregistered190

Senior
Veteran
dans

dans

Sorry I previously missed your post.....yes, out of respect to you I will quit busting chops for now but believe it was long overdue based on how many rep points and private messages I got. So sorry to have aggravated you.....especially right now. Hope everything is going as well as it can be for you and glad you are still in lurk mode in here. :respect::tiphat:
 

Hammerhead

Disabled Farmer
ICMag Donor
Veteran
I've had quit a few fans that needed a push to start. Oiling them never fixed any long term. That's the 1st thing I try. They all died within a few months. There not made to be serviceable. I have taken some apart. Replacing parts was not gonna happen.

If anyone thinks they can shame me from doing my thing is sorely mistaken. If you want to act like a kid based of rep points lets have some fun. If you want me to be just as childish I can play. I had a conversation with JW about using the male I found. I told him I wasn't sure I was gonna even use it. He turned out to be a good male. I sent JW some pollen from this male that he used to make seed with as well. Since I didn't have much to hunt through. I made a bunch of MAC F2 to pheno hunt for a better look..Everything I've done has been the right thing. Cap knows he is welcome to anything I've made. It is true it doesn't mater who makes seeds. We all have haters. I cant make everyone happy. I didn't expect to get trolled here. Those trying to bring down someone else just doesn't have the capacity to do there own thing. Its fucked up world we live in. I have much more important things to take care of right now. My sister needs my attention right now. Most of the $ made will go to the funeral. If you guys want to attack me now have fun. I will be back to take you on when I have the time.
 

Attachments

  • DSCN1332.jpg
    DSCN1332.jpg
    153.8 KB · Views: 19
Last edited:

unregistered190

Senior
Veteran
FECO (full extracted cannabis oil)

FECO (full extracted cannabis oil)

Starting off with 30 grams of material. Of course, like anything else...the quality of what you put in...determines the final product. Broken up buds...the smaller the better because of surface area during the extraction.

picture.php


picture.php


Material and ehtanol both go into freezer now for at least 24 hours. Better returns are acheived when using dry ice rather than just putting in freezer but I get -12 deg F so cannot complain.
 

dominicangreen

Weed Robot
Veteran
As pointed out if they are still humming u can get them to spin with help. Taking the front grill off is a PITA. Its only a matter of time before the motor locks up. WD40 wont fix that.


[YOUTUBEIF]6DIWKD9rmvU[/YOUTUBEIF]


Try it you have to drench with wd40 the copper coil and all and help it with hand to spin
 

Latest posts

Latest posts

Top