9 x 8 room, 5 X 600watt 4 ebbnflow tables, need advice.

[cork144]

Hi ive been planning this 9 x 8 prepitural grow room for the past few weeks, im looking to set this thing up by early 09 so i need to know if im missing anything, ive drawn 3 different templates to show what i was thinking for a grow room. priced up grow room at about £1800 - £2400 to setup since i dont want to DIY anything in here.

(large images so ill put as links.)

http://www.uplo4d.com/images5/939748328thetomatoproject1.png

http://www.uplo4d.com/images5/816186615thetomatoproject3.png

http://www.uplo4d.com/images5/1222611046thetomatproject5.PNG

inspiration for this grow room has been the 9k basement grow by yamaha_1fan and the how to grow your own cannabis youtube video.

the first few pictures shows me venting to the window, but afterwatching barry coopers neverget raided, using FLIR imaging the police can see heat exhaust coming from grow rooms, so i need to spread my exhaust somwhere else, i was wondering with 2 420m3/h 6inch fans with 6inch carbon filters be enough to vent out 5 600watt hps lights heat output? if not what ventalation changes should i make.

Im going to get my inlet air from 2 100MM fans pushing probably 200m3/h each, which will now be coming from the window, im going to vent this pretty much onto the plant areas.

room dimensions are 9 feet deep 8 feet wide 7.5 feet tall, hoping for a harvest every 2 weeks or so, will 1 600watt hps be fine for a 3x3 flood table?

oh edit; going to line the walls in anti detection foil and panda film the walls.

 

[ureapwhatusow]

push the tables together to get a square configuration with your lights

you have the permiter to circumvent your garden, and will have the same 3' depth access your plans demonstrate now

the side light in a square configuration is utilized on 50% of the lights instead of lost to the ailse or simply refected

 

[cork144]

push the tables together to get a square configuration with your lights

you have the permiter to circumvent your garden, and will have the same 3' depth access your plans demonstrate now

the side light in a square configuration is utilized on 50% of the lights instead of lost to the ailse or simply refected

ah im sorry but i didnt include that the left side of the room has a 2ft rising which is 3ft wide. which is why im going to have a middle alley style grow room.

 

[ureapwhatusow]

ya gotta work with what ya got

 

[cork144]

ya gotta work with what ya got

yes i understand that i should have better utalization of my lights, but it does work out alright, on the left going to rise the tables by a foot then on the right side build asupport for the 3x4 trays so i have have my resivours in there, going to have a falsefloor put down so i can run all the drainage and pumping pipes under it so i dont trip over the lines.