8x4 hydrohut 2000w

[hmdizzle]

hey so currently im setting up an 8x4 hydrohut tent, i got 2 1000w cooltube's, 2 6" elicent inline fans and an 8" carbon scrubber (forget what size its about 2.5 feet high). the temp. of the room its in is around 75-80 on average. and when the light are on its high 80's in the tent. so should i run the tubing from outside the tent, thru the cool tubes and out the top of the tent with a 6" fan, and then have the carbon scruber and fan outside of the tent also sucking air from the bottom to vent and deal with smell? or could i fit the carbon scrubber under my 8x4 table and have it just continuosly scrubbing the air, and adding a 20lb c02 rig to the set-up? any other suggestion would be appreciated, i can spend more but the only thing i can't do is have a co2 generator with a burner. o and some of the strains i have for this are c99, mk-ultra, chronic, purple cream and stupersonic. can anyone help? thanks

 

[hmdizzle]

anybody?

 

[420ponics]

Pictures would help. But I would definately keep the scrubber in the room. If you could have it near the told of the room that would be nice. I build a frame for mine so it could sit where the heat mainly goes.

Ponics.

 

[UNREGISTRD]

theres a couple ways u could do it but for 2-1k's In a tent ull have to put the fans on the lights like so:

 

[buzzed day]

sorry i can't help you but good luck and the pic.above looks good with 2 fans total moveing the heat and the smell. and you might want to try 3 fans 1 after each light and 1 for the scrubber

 

[MTF-Sandman]

I'd use one of the 6" fans to air cool the lights (dedicated intake and exhaust) and the other on a thermo running the scrubber. Whatever you choose, make sure that your exhaust point is up high in the hut since it'll remove the warmest air up there. If you place your exhaust point down low, it's just going to suck air straight from the intake to the scrubber which will rob your plants of fresh air and it won't do much to remove the hot air.

 

[hmdizzle]

thanks for the help, so is it ok if i have the ducting coming out of the top of the tent like in the diagram and then have the carbon scrubber, with the fan on top, on the floor next to the tent? or will that make it less effective. the scrubber is heavy and i wouldnt really be able to build a frame to support it up there. thanks again

 

[hmdizzle]

also how would i set it up for a sealed co2 set up, would i just have a fans sucking air in from one side, thru the lights and then out the other side?

 

[SBP]

yup, have 1 fan suck air thru 1 side thru lights and out the tent. then u have a scrubber in the tent constantly scrubbing the air in the tent. set CO2 ppm to 1500 and let 'er rip

 

[Guest]

Unless you are able to keep your room cool also, your OUTSTANDING tent system will bake.

If you setup your tent in the right part of the room, you can locate your ballast out of the grow room, and vent the hot air out of the room also. With a little creative thinking you can still keep it stealth by venting to attic. The ballast and fans can go in the attic also.

If you cant keep the grow room that cool, then I would do co2 in the tent as SBP said.

This is my veg chamber with co2 and sealed light.