upon further review (of diagrams and pictures) its an ignitor thats been coming with my ballasts not capacitators. i guess all i need is a cmh bulb and im set with the ballast i already have.
-
ICMag with help from Landrace Warden and The Vault is running a NEW contest in November! You can check it here. Prizes are seeds & forum premium access. Come join in!
70w hps club
- Thread starter Mk3Jetta
- Start date
M
mrred
caps have 2 wires and the ignitors have 3 wires always?
M
mrred
whats the usable light distance on a 70hps? 6-7 inchs maximum?
here my cab i just built a few days ago, dont know if want to go vertical or what, its 14x14x15
here my cab i just built a few days ago, dont know if want to go vertical or what, its 14x14x15
Last edited:
its useable above that, its just weaker.
vertical.. i would say it would be a PAIN to do, scrog is more efficient, but you must make sure the tops are well established before flowering for best yeild.
grouchy
Active member
I think you should try the v-scrog out. Make a lampshade for that 70w and use every lumen it throws. You could rotate the screen to get access to the back side for training. Way more efficient than a flat scrog.
a 70 will cover that space easily. i would be more worries about heat. my box is 36x24x12. 36high 24 wide 12 deep and 70 was fine, look at the pics i posted on page 4. your space is like half that. and then some. i think the falloff range with a 70w is like 2feet. or something like that, and minimum distance from bulb recommended is 7inches or so. there was a chart lemme see if i can find it.
M
mrred
having trouble getting my bulb to ignite , i wonder if the ignitor was built into the light sensor or what, some parts are rusty thru, prob have to clean them and solder them
Last edited:
I LOVE MY 70 WATT HPS!!!
I have no pictures to throw in right now as my camera got jacked.. but currently I have built a small cabinet (3ft wide x 1.5 ft deep x 32inch tall) utilizing my 70 watt HPS and 180 watts of CFLs in a mixed spectrum for added supplement.
I have used it for a couple of grows(mostly unsuccessful due to heat or security) and it still keeps kicking.
mrred, yes solder the heck out of those connections!!! There is much to be said about the inefficiencies due to faulty or hastily clad wiring.
As for how far the light is effective, that's a tough one... I would like to say in my own experience, that the maximum usable light is about 6-8 inches away...
I have no pictures to throw in right now as my camera got jacked.. but currently I have built a small cabinet (3ft wide x 1.5 ft deep x 32inch tall) utilizing my 70 watt HPS and 180 watts of CFLs in a mixed spectrum for added supplement.
I have used it for a couple of grows(mostly unsuccessful due to heat or security) and it still keeps kicking.
mrred, yes solder the heck out of those connections!!! There is much to be said about the inefficiencies due to faulty or hastily clad wiring.
As for how far the light is effective, that's a tough one... I would like to say in my own experience, that the maximum usable light is about 6-8 inches away...
grouchy
Active member
mrred - I like the reflector. Did you make it yourself? It looks professional from the pic.
Here is a link to an easy to use wiring diagram that worked for me
http://www.icmag.com/ic/showthread.php?t=36344
Here is a link to an easy to use wiring diagram that worked for me
http://www.icmag.com/ic/showthread.php?t=36344
Mk3Jetta
Member
I'm poor and dont have a camera. Also I'm not even growing yet. But I am in the process of building a cab with a 70 HPS.
I just wanna get it fully stealthy(light, sight, smell) and have the temps perfect before growing. Dont wanna just jump right in, ya know?
Dont let amateurism get in the way of sharing!!!!! If you've got info on the 70w High Pressure Sodium lamps/setups,
POST IT!
I just wanna get it fully stealthy(light, sight, smell) and have the temps perfect before growing. Dont wanna just jump right in, ya know?
Dont let amateurism get in the way of sharing!!!!! If you've got info on the 70w High Pressure Sodium lamps/setups,
POST IT!
M
mrred
i took the reflector off a 100mh i cant find a bulb for locally, its a cute little reflector, everything else i found laying around too, i'll most likely give it away or let someone borrow it sooner or later
mine doesnt have a ignitor tho, im guessing th wireing is the same a a mh?
mine doesnt have a ignitor tho, im guessing th wireing is the same a a mh?
if you look on the ballast it should have a wiring diagram on it, and also you should get some wire nuts on those connections. dont wanna fry yourself. or get a bad shock anyway.
M
mrred
oh yea for sure i just had them like that because i had my doubts it would work, no diagram tho, right now its serving as a drying chamber, i'll clean the connections up good tomorrow and try again, i've wired mh(with cap of course) and hps's ballasts before with no cap but they had a igniter,
on the caps does it make a difference which way it goes? like a led?
on the caps does it make a difference which way it goes? like a led?
grouchy
Active member
Well I finally started my own thread. If you guys are interested come check it out
Self-Reliance Micro Cab'n - http://www.icmag.com/ic/showthread.php?t=138436
Self-Reliance Micro Cab'n - http://www.icmag.com/ic/showthread.php?t=138436
Hello everyone
jonkanoo told me about the club and i would like to share with you some picture of my last work with 70w.
This one is a The church from green house seeds, worked whit LST in a 10 liter pot. By the way it seems to be the regular pheno (sativa dominant), this one yielded about 52 dry grams
And here are some pictures from my current grow in which i'm working with a PPPxTaskentixUzbeka and one Afgani x Ice, both strains from Conlarazon.
here they are two weeks ago
And here they are today, after one week of flowering
Well, thats all for now, i hope you've enjoyed it
Cheers mates
jonkanoo told me about the club and i would like to share with you some picture of my last work with 70w.
This one is a The church from green house seeds, worked whit LST in a 10 liter pot. By the way it seems to be the regular pheno (sativa dominant), this one yielded about 52 dry grams
And here are some pictures from my current grow in which i'm working with a PPPxTaskentixUzbeka and one Afgani x Ice, both strains from Conlarazon.
here they are two weeks ago
And here they are today, after one week of flowering
Well, thats all for now, i hope you've enjoyed it
Cheers mates
CimaDiRapa
Member
Panconqueso great work! You stimulate my imagination with this pic.
52grams with a 70wHPS? Very good!!
How many weeks of veg had The Church when you turned her in 12/12?
Cheers
52grams with a 70wHPS? Very good!!
How many weeks of veg had The Church when you turned her in 12/12?
Cheers
Mk3Jetta
Member
IDK exactly what a Midi-tower is but a 70w HPS in a PC is very hot! I dont know if I've seen it done successfully but now would be the best time to try. Nothing like the present right?
Panconqueso great work! You stimulate my imagination with this pic.
52grams with a 70wHPS? Very good!!
How many weeks of veg had The Church when you turned her in 12/12?
Cheers
thanks to you for your words
this girl had the classic four week of veg and 70 days of flower, it grew like a monster during the first two weeks
Cheers mate
