What's new
  • As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.

250w hps x2 closet. Kush Grow

Tvede

Member
Hello everyone, and welcome,my english is not the best, but i understand everything, feel free to ask about anything please
Okay soo heres some pics of the grow and the setup.
Btw my english is not the best, but i understand everything, feel free to ask about anything please!
One of my cooltubes is broke so im gonna start to vegging with a standard reflector.
Im very soon gonna make a hole for my intake fan. Then im gonna buy a new cooltube before i start blooming.
Atm, the plants are about 17 days old.
here is my closet, and a bit about my nutes and stuff.
I have 7 plants, all feminised.
One question, when should i start to bloom?


The Temp. is on 28 degree, to 30 :cry::fsu:

about 60x120x120 cm.

- 250watt HPS dual spektrum x 2
- TT Fan 100mm 175m³/h
- Eco Filter, 480cm3
- 2x small clip-on fan
- Cooltube 125mm

Nutes:

- Plagron Terra bloom
- Plagron Pure enzym
- Plagron terra Grow
- Plagron Power roots
- Plagron Green sensation


The strain:
Copenhagen Kush
aka. kushenhagen
Type: Mostly Indica
Genetics: Krome White Triangle, pre-98 Pakistan kush
Flowering time: 56-63 days indoors.
Yield: Above average
Suitable environments: Indoors. Outdoors between 50°N. and 50°Sº .
Effect /Buzz: Silk smooth smoke, soothing relaxing with high twist.
Smell/Taste: Light skunky

Training:
SCROG

Logbook.


8/10
- All the plants have come out of the ground overnight.
they have all been put under a 125watts hps.
10/10
- All the plants seem to thrive, but they are a little lanky. I put the lamp closer and hope it helps on it.
14/10
- The leaves are a bit larger, they are still lanky, and hanging in a strange way. I expect that they have developed second set of leaves within a week.
they have all been put under a 250watt hps

21/10
- The plants are not as lanky longer, they are going with their third set of leaves, only two of the plants need support, I have fans on them later.

This is a picture of the closet from outside.

Here you can see how i mounted the tt vent, and the out take

Here you can see my 5 passive intakes, 65mm holes.
 

Tvede

Member
I had some temp problems before, when the closet was closed, the temp was on 32, and when it was a little open 28. So i removed the carbon filter, from the system, that was staying on the floor.
so it looks like this now


The temp, i now on 25 degress

I have topped all the plants, and resoiled 6 of them to 6L pots.
The last one is going to be a mother.

This is some pics the day after resoiled and topped
 

joe guy

Member
Lookin good so far buddy, mayhave to get a stronger fan for the temps and use a fan speed controller to dial it in perfect.. Its better to have too much power and dim it than stress the little one and defeat the purpose of having a stealt setup... Good luck im gona hav to check in often and see how ur doin...good luck cant wait to see the final tally

Oh yeh and ur english seems to be better than some of the americans here lol...
 

Tvede

Member
Thanks alot for following my thread!!

Thanks alot for following my thread!!

Joe - I whould love a bigger Fan, and a fan controller, i just out of money atm ^^

Happy cannabis - Yea i like the strain very much, low plant, with very dark green branches. :)

I can't figure out when to start blooming if i wanna do Scrog?
 

joe guy

Member
Iv never ran a scrog but was.very intersted. You are.suposed.to fill your screen liltle over half full then flip to 12 other wise ur gona have alot of wasted screen space.. And i feel ya with the no money just keep your eye out for a good deal not sure where you are at but iv gotten every thing in my grow room from craigs list and the swap meet.. And the used section at the hydro shop..
Fan 30 swapmeet
Scrubber 20 swapmeet
Old hood and balast craigs list
Except the bulb and ducting i actually bought new...
My nutes sample bottles..
This can be a very.expensive hobby unless u have patience to hunt for the.deals..
 

Tvede

Member
Vukman - I really hope it does.
Joe guy - grow equipment is not very common in this parts i live, and very expensive, i saved about 50% of the price to buy from kittbag in England, and not in Denmark. I just need to find a cheap shop, thats in europe.
 

Tvede

Member
Vukman - I really hope it does.
Joe guy - grow equipment is not very common in this parts i live, and very expensive, i saved about 50% of the price to buy from kittbag in England, and not in Denmark. I just need to find a cheap shop, thats in europe.
 

Tvede

Member
Im looking at this fan.
A low cost fan with high capabilities
Available in 4, 5 & 6" dia sizes.
Built-in speed control knob.
Built-in temperature control knob.
4m long temperature probe for accurate temperature reading of your grow room.
Fan temp control can be used to reduce airflow fan speed to minimum after your grow lights have switched off.
Greatly improves control over your grow room ventilation.
Long life ball bearing motors and thermal protection to prevent motor burnout.
Mixed flow technology for extra pressure development and longer duct runs.
Built-in mounting foot for easy fixing.
Cable and UK 13amp plug & supplied; plug ad play!
Compatible with our Hydroponics Carbon Filters.
• Built in temperature sensor
• Dynamically adjusts fan speed to control temperature accurately.
• Fully adjustable idle speed.
• Silent and safe operation
• Compact dimensions
• IPX4 protection class
• Two-speed operating mode
• Access to the motor and impeller without dismantling the ducts.
The price for it is 112 dollars
 

Tvede

Member
A little update

A little update


Hello everyone, hope your still following my thread.
Long time no see, :ying:
i will put the Scrog in the closet at monday.
Im hoping to go 12/12, at the first december, but i will not start before, the screen is half full.

I have en little pic update,


 

Pettehii

New member
Hi Tvede!

Very interesting setup, will be following u from Finland : )

About ur pot size, I think that ur 6L pots will do fine at ur cabinet, the plants will fill the whole cab, just patience with the scrogging!

Good luck!:tiphat:
 

Tvede

Member
I have decided to make SCRoG in half of the closet, and sog in the other, a result of I do not want to wait much longer to put them in flower.
I whacked one of the plants to take all the clones.
they were transplanted to 11L ..
plan to put the cabinet in flower here on 8/12
I've got a new exhaust, which control the temperature and speed controlled.

a bit pics from today




 

Tvede

Member
Yeah at 8/12 or 10/12 i dont remember, i Can see that in my logbook when i comeback homie from Vietnam, plus i Will add some more pics, please feel free to ask about anything :)
 
Top