Venting Question for 10x10 Tent

[ganjalfthegreen]

Hey all...

New grow and need some help with the best way to setup the ventilation as we have only dealt with x2 light setups before...

10x10 Tent in the basement. Temps are nice and cool to begin with year round. First round be running x4 1000w reflectors over x36 5gal buckets, taking clones, and second round adding x2 more 1000w, dimming all x6 lights to 600w and running x2 4x8 flood tables obviously with each table having x3 lights.

Clear as mud? Good. So as you can see we have 2 separate light runs, regardless which round we are in.

Wondering on the most efficient way to set this up? Will having a 6" Inline fan for each run be enough? Will that control odor as well having 2 filters? Or sholdl we upgrade to all 8"?

Scrubbers will be hung on roof of tent, vents obviously open to bring in cold air. Basement has x2 windows that will be cracked to allow fresh air intake.

Each run has - Scrubber->light->light->light->6" Fan->Exh. Ducting

Comments? Questions? Concerns?

-g

 

[ganjalfthegreen]

We chose to go with 1000's to save ourselves a bit of money first round, and since they are only an extra $50 as a pose to 600w. Rather have too much and turn down, then need more and be effed.

 

[TheyCallMeJJay]

6 inch will not be enough. 2 per 2 and you're golden.

I run an 8 inch through 3 AC/de 100w reflectors and I'm at the edge of what's acceptable.

 

[AvidLerner]

I used one fan run for lights and a separate fan run for ventilation. plants need a lot of air, and love the breezes. I combined the runs before exit.

 

[jav2043]

You will need 2 8in fans and filter combos unless you run 10in fan n filter reduced to 8in ducting.