Okay, grow thread coming soon(soon as I reformat and find my camera).....
Its what I like to call, a 'TNGB', more info with up coming thread.
But to my question....
Cab is 2' deep, by 5' long, by 6' tall.
So I'm at about 60sqf.
From my reading, I need 3-5 air changes a minute.
So my exhaust should be between 180 and 300cfm's.
I also need to build a new carbon scrubber(old one was a big room)
In flower, I'm at about 3x2x6....Right now, have a non air cooled, non remoteballast(built into the hood grrr), 250w MH, with a 250w(230w?) hps conversion bulb. Just shy of the 50wpsf goal(ill have some cfls on the sides), at some point in the next month or so, would like a 400w in a cool tube.
For veg, I have about 2x2x2.5, exacty 2 feet deep.....I don't think I can fit 2ft tubes in there, how long is 2ft tubes? wouldmount them right to the wood with ballasts being up in another area(allready have the ends for them) would end at around 200 watts.
Above that, is either drying or clones and moms, or storage, not to sure yet, and above that is the electrical area.
So now you have most of the info, plz help me figure out my exhaust. Quiet is key, but dont think I can be to quiet with 180-300 cfm. I only have a 150cfm dayton and some crazy pc fans(with no pressure 133 cfm lol) but was gona use them just to blow on plants. I was kind of thinking about the Stanley Blower Mod idea, but my Hope Depot only has them on the website and 'claim' they dont sell it anymore because its not on there system and all systems are the same...
So, for now, I need a blower that would keep the cab cool, and scrub the air(srubber->blower->out cab)
At some point, will prolly use the 150 cfm dayton to cool tube a 400, but what should I do for now??
Sry for such a long post, just wanted to give you all the info I could lol.
By the way, this is my first legal grow hehe, and I have 3 diff strains going and the bubble cloner works like a charm(took some from a flowering plant and got my roots)
Thanx much,
Tom
In case you skiped the novel above, heres to the point questions.
1: What is better, more towars 180 cfm or more towards 300 cfm(will be making carbon scrubber?
2: Yes or no on the Stanley Blower?
3: My 150cfm dayton is prolly to weak huh?
4: Should I make a grow thread?(have pics from the start a couple months ago
guess that should do it, sry for the books lol
Its what I like to call, a 'TNGB', more info with up coming thread.
But to my question....
Cab is 2' deep, by 5' long, by 6' tall.
So I'm at about 60sqf.
From my reading, I need 3-5 air changes a minute.
So my exhaust should be between 180 and 300cfm's.
I also need to build a new carbon scrubber(old one was a big room)
In flower, I'm at about 3x2x6....Right now, have a non air cooled, non remoteballast(built into the hood grrr), 250w MH, with a 250w(230w?) hps conversion bulb. Just shy of the 50wpsf goal(ill have some cfls on the sides), at some point in the next month or so, would like a 400w in a cool tube.
For veg, I have about 2x2x2.5, exacty 2 feet deep.....I don't think I can fit 2ft tubes in there, how long is 2ft tubes? wouldmount them right to the wood with ballasts being up in another area(allready have the ends for them) would end at around 200 watts.
Above that, is either drying or clones and moms, or storage, not to sure yet, and above that is the electrical area.
So now you have most of the info, plz help me figure out my exhaust. Quiet is key, but dont think I can be to quiet with 180-300 cfm. I only have a 150cfm dayton and some crazy pc fans(with no pressure 133 cfm lol) but was gona use them just to blow on plants. I was kind of thinking about the Stanley Blower Mod idea, but my Hope Depot only has them on the website and 'claim' they dont sell it anymore because its not on there system and all systems are the same...
So, for now, I need a blower that would keep the cab cool, and scrub the air(srubber->blower->out cab)
At some point, will prolly use the 150 cfm dayton to cool tube a 400, but what should I do for now??
Sry for such a long post, just wanted to give you all the info I could lol.
By the way, this is my first legal grow hehe, and I have 3 diff strains going and the bubble cloner works like a charm(took some from a flowering plant and got my roots)
Thanx much,
Tom
In case you skiped the novel above, heres to the point questions.
1: What is better, more towars 180 cfm or more towards 300 cfm(will be making carbon scrubber?
2: Yes or no on the Stanley Blower?
3: My 150cfm dayton is prolly to weak huh?
4: Should I make a grow thread?(have pics from the start a couple months ago
guess that should do it, sry for the books lol
