Titan Controls Atlas 7, anybody using one?

[SKUNK420]

Was thinking of getting the Titan Controls Atlas 7.
It's a basic CO2 controller with 3 different preset levels at 1000 PPM, 1250 PPM or 1500 PPM.

http://www.titancontrols.net/products/co2-devices/atlas-7.aspx

Wanted to see if anybody using one. How well does it work?

update Sept 3rd:

Bought it a couple of days ago and it works fine to me. You have to mount it somewhere in the room that will allow it to get a proper co2 reading but other then that I'm cool with it and the price. Decided not to bump this thread because nobody replied, plenty of looks though.

 

[its all good]

wish more people would reply as i'm currently looking at purchasing one, it seems to be the cheapest option for reliable co2 control.

been along time since this was posted, are you still using the atlas 7? if so have you had any problems, do you find it to be accurate?

does anyone else have any info on whether it is worth purchasing one?

thanks

p.s i'm a total novice, just registered to this site and it has been nothing but helpful

 

[budleydoright]

Spend a few bucks and get one with an LED readout. You have no way of knowing what your levels are, only that it is in range. If it is out of calibration you'll never know. This can be true with a readout as well, but you usually see changes in the numbers as they get out of range.

 

[its all good]

nice one, considering spending a few extra bucks. but ill have to a lot of research into each controller, as its a case of spending around,
$240 on the atlas 7
$260 on the atlas 9
$290 on the atlas 2
none of which i believe have a led read out.

then there's the atlas 1 which would cost me roughly $490
(I have very restricted options when choosing where to buy products like this, thanks to my location. i have finally found an online store which will ship to my country without charging extortionate shipping prices)

one thing I'd like to know about the atlas 7 which may not sound very smart is, whether it has an in built co2 sensor (as i can't find any forum or retailer that mentions its co2 sensor, which makes me wounder whether the co2 out put is based some kind of algorithm 'excuse any bad terminology')
every where I look it up the photocell is mentioned which obviously is a big plus (even though its 'really' it nothing a timer on the same setting as the lights can't do) but no mention of a co2 sensor?

 

[zilants]

How about a saturn 6?


titan controls makes that too

i was looking at one the other day it looks like it does what you need

 

[SKUNK420]

Long time since I've logged on and noticed my thread.
Been using the Atlas 7 for the last 2 years and couldn't be happier with it.
Cost me around $200 local shop price matched GreenTrees.
There are 3 preset levels with an l.e.d. for each level. There is no numerical l.e.d. display .