super easy lighttrap out of soda cans !

[ericforeman]

hello ! this is what you need.

1 glue pistol
1 scissor
plenty of soda cans
1 black tape


step 1. you decide how long the light trap need to be .
after that you cut out a piece of the can in the lenght of what your light trap is gonna be (soda cans are best for small lighttraps)
the widht of the cutted piece shall be about the size of the black tape .

step 2 but the black tape on the over and underside of the aluminium strip from the can ,(secure with the glue pistol , let the glue sit on the place u wanna secure for 5 seconds then smotch it around the area , this is good if u have bad stickiness on the tape.


step 3 .

 

[ericforeman]

push on the sides so it looks like this ^
then use the glue on each side and put it down on the other light traps

step 4

after about an half hour or a little more you are done !

 

[Firius]

wow, that is alot of work for a light trap...... gonna stick to low density filter foam

 

[Green81]

Nice 1 Eric

 

[ericforeman]

low density foam where can i find it and do you have a pic of it

 

[noyd666]

nice work yer made a few quick ones over the yrs out of cardbourd,foam sounds cool easy way.