Aotf
Member
So, this might not be the best place to start, but I'm a newb to the site.
I was wondering if anyone has ever attached a section of drip or soaker hose to a reservoir in the outdoors.
My thoughts are too, place a small section of drip hose, 25-45cm's in length to a reservoir, in my case, probably a five gallon bucket.
So I have a few outdoor sites, but water is an issue at one, I want to bury the reservoir above the planting site and bury a length of water hose, with the drip hose attached at the end unnderneath the root zone of a girl.
From my drip hose:
"[FONT=Arial, Helvetica, sans-serif]118.3 gallons per hour/gph, per 100' at 25 psi[/FONT], more flow @ less than 40 ft sections"
I will probably tape over sections of the hose, to slow flow...........am I wasting my time here?
I was wondering if anyone has ever attached a section of drip or soaker hose to a reservoir in the outdoors.
My thoughts are too, place a small section of drip hose, 25-45cm's in length to a reservoir, in my case, probably a five gallon bucket.
So I have a few outdoor sites, but water is an issue at one, I want to bury the reservoir above the planting site and bury a length of water hose, with the drip hose attached at the end unnderneath the root zone of a girl.
From my drip hose:
"[FONT=Arial, Helvetica, sans-serif]118.3 gallons per hour/gph, per 100' at 25 psi[/FONT], more flow @ less than 40 ft sections"
I will probably tape over sections of the hose, to slow flow...........am I wasting my time here?
Last edited:
