Hi!
Right now I'm about to finnish my new groowroom. It's 2m wide, 3m long and approx 2,5m to the roof. All in all approx 15sqm.
The room itself is almost a 100% sealed, both air-tight and lightproof. As it seems I will be running around 2000W of HIDs in three separate coolshades.
I'm thinking of hooking up the coolshades to a single 365sqm/h fan that draws air from the outside, trough the tubes and right out in the next room. However, I also intend to have a pretty large fan connected to a carbon scrubber that pulls smelly air from the inside and out. My question is, how big should this fan be? Will ~600sqm/h be enough or should I go for a ruckbox of 1200sqm/h? It's very important that's it's a silent fan, so I'd be happy for any recommendations.
Think I will also need an active air-intake. Any ideas for the dimension of that fan?
The air that's coming in is ~21degrees celsius (hey, I'm european
). I have a temperatureregulated fancontroller for both exhaust and the active air-intake fan, also I have a controller for the RH where I can manage the rooms RH pretty exactly.
CO2 will be used, so I guess the max temp will be 30 degress something, but I aim at 28degrees. Then I can go higher if I need to
Pardon my bad english and the long post.
Sincerely,
LEGC
Right now I'm about to finnish my new groowroom. It's 2m wide, 3m long and approx 2,5m to the roof. All in all approx 15sqm.
The room itself is almost a 100% sealed, both air-tight and lightproof. As it seems I will be running around 2000W of HIDs in three separate coolshades.
I'm thinking of hooking up the coolshades to a single 365sqm/h fan that draws air from the outside, trough the tubes and right out in the next room. However, I also intend to have a pretty large fan connected to a carbon scrubber that pulls smelly air from the inside and out. My question is, how big should this fan be? Will ~600sqm/h be enough or should I go for a ruckbox of 1200sqm/h? It's very important that's it's a silent fan, so I'd be happy for any recommendations.
Think I will also need an active air-intake. Any ideas for the dimension of that fan?
The air that's coming in is ~21degrees celsius (hey, I'm european
). I have a temperatureregulated fancontroller for both exhaust and the active air-intake fan, also I have a controller for the RH where I can manage the rooms RH pretty exactly.CO2 will be used, so I guess the max temp will be 30 degress something, but I aim at 28degrees. Then I can go higher if I need to
Pardon my bad english and the long post.
Sincerely,
LEGC
