So I'm looking to put my grow tent back to good use in the near future and the only thing I don't really have is a co2 system.
My setup : 5x5x7 tent
600W HPS, looking to upgrade to a raptor or magnum reflector and maybe make the jump to a 1kw HPS.
Titan E&F 12 site kit
6" can fan (about 330 cfm which is double the CF of my tent appx 175 cu ft) strapped to a 6" can filter (about 312 CFM per manufacturer website.
AquaFX RO 100gpd unit that I want to upgrade eventually.
16" oscillating fan to keep air moving hung from the ceiling (it's a weird look but it works well)
I have my reservoir outside the tank with a two pumps in the drum, one in the center recirculating the water in a column upwards for surface aeration (which from my understanding puts more o2 in the water than an airstone would, the other pump is for filling the controller on flood cycles. I have the can fan strapped above the access door I use to keep it out of sight but as high up as possible to pull heat out, thru ducting into my air cooled hood, through the can fan and then up and out through the ceiling port in my tent.
Now my question is I want to do co2 enrichment on the next upgrade. I'm planning on a 20lb + tank, regulator (which I need opinions on what's going to be reliable and most bang for my buck), some form of ppm reader and sensor for the tent. Can I keep the inline fan running during the on cycle with the filter up top and add co2 without it being sucked out of my tent? I know co2 is heavier and will settle but my biggest concern is going to be heat extraction but not wanting co2 to get sucked out and piss money down the drain. Will my setup work like I want it to or do I need to run an additional fan to make it work?
My setup : 5x5x7 tent
600W HPS, looking to upgrade to a raptor or magnum reflector and maybe make the jump to a 1kw HPS.
Titan E&F 12 site kit
6" can fan (about 330 cfm which is double the CF of my tent appx 175 cu ft) strapped to a 6" can filter (about 312 CFM per manufacturer website.
AquaFX RO 100gpd unit that I want to upgrade eventually.
16" oscillating fan to keep air moving hung from the ceiling (it's a weird look but it works well)
I have my reservoir outside the tank with a two pumps in the drum, one in the center recirculating the water in a column upwards for surface aeration (which from my understanding puts more o2 in the water than an airstone would, the other pump is for filling the controller on flood cycles. I have the can fan strapped above the access door I use to keep it out of sight but as high up as possible to pull heat out, thru ducting into my air cooled hood, through the can fan and then up and out through the ceiling port in my tent.
Now my question is I want to do co2 enrichment on the next upgrade. I'm planning on a 20lb + tank, regulator (which I need opinions on what's going to be reliable and most bang for my buck), some form of ppm reader and sensor for the tent. Can I keep the inline fan running during the on cycle with the filter up top and add co2 without it being sucked out of my tent? I know co2 is heavier and will settle but my biggest concern is going to be heat extraction but not wanting co2 to get sucked out and piss money down the drain. Will my setup work like I want it to or do I need to run an additional fan to make it work?