Mr Bubbles
Member
i have approx. 1 sq. feet. of growing area. The only problem wit my microgrow is that my height might be too low, it measures 16.5" (H) but with the resevior + the lights i only have 8" in growing height. My plan is to use a scrog to maximize my height. However, i have just read the cannbis grow bible it it says "The screen is set above the plant's medium. This height varies fomr 8" to 24" depending on the light type you are using." So dat leave me with approx. no space to grow. =[ according to this book. What do u guys think? can i lst the very bottom of the stem to the res. with string or something & have the screen 1.25"(H) above the resevior leaving me with 6.8"(H) for my canopy.
info:
lights 3x32w CFLs (2200 Lumens x 3 = 6600 Lumens)
116W/ Sq. Foot
55L p/ Sq. In.
Two lights will be on a reflector painted flat white or some high heat white paint. These two will be warmwhite (red) mounted horizontally on the very top of my grow room and a vertical light in the very back with a reflector (like a light in the middle of the garden) will be daylight or coolwhite.
With the size limitations i have i think i'll go 12/12 from seed.
info:
lights 3x32w CFLs (2200 Lumens x 3 = 6600 Lumens)
116W/ Sq. Foot
55L p/ Sq. In.
Two lights will be on a reflector painted flat white or some high heat white paint. These two will be warmwhite (red) mounted horizontally on the very top of my grow room and a vertical light in the very back with a reflector (like a light in the middle of the garden) will be daylight or coolwhite.
With the size limitations i have i think i'll go 12/12 from seed.
Last edited: