i´m baffled why my tag pump is turning on in every misting cycle as i have pressurized bladder tank hooked on it, does anyone know what is wrong, or missing from the setup?
my setup is aquatec 8800 pump whit eso and tso harvest wich makes the pump stop at 60psi(4.1 bar) pressure when the tank is full and i have 16 pieces of mist nozzles which have max flow of 0,89 gallons each in one hour, as all together 14.6 gallons in hour, but as i run 1-2 second bursts it should be 0.23 gallons in minute and 0.0039 gallons in one second, and i have 1.3 gallon pressurized bladder tank which on my calculations should take loads of start and shut off cycles before the tank runs off the pressure. somebody please help me...
my setup is aquatec 8800 pump whit eso and tso harvest wich makes the pump stop at 60psi(4.1 bar) pressure when the tank is full and i have 16 pieces of mist nozzles which have max flow of 0,89 gallons each in one hour, as all together 14.6 gallons in hour, but as i run 1-2 second bursts it should be 0.23 gallons in minute and 0.0039 gallons in one second, and i have 1.3 gallon pressurized bladder tank which on my calculations should take loads of start and shut off cycles before the tank runs off the pressure. somebody please help me...
