ITryToGrow
Member
Right, not my first grow. Been doing this for ~5 years and never had any trouble. At least not like this.
The only new addition to my setup, that would (I think) make a difference, is RO-water.
Pics:
For setup info see my diary.
They are about a month old, lights are 18/6.
They started out with an EC of about 0.8 and pH around 5.6. A little high, but I figured they would show signs of nute-burn if they thought it was too much. Which they did.
I emptied the tanks and put the EC at about 0.5, but it still didn't get any better and the pH started to fluctuate.
Emptied again and put the EC at 0.2 the pictures are taken after a week of EC 0.2. pH started to fluctuate even worse, going from 6 to 4 in one(!) day.
I've never had issues like this, and I have no idea whatsoever what to do. Like I said this is the first run with RO, but I'm not sure how having more pure water can be bad?
Nutes are Metrop and I use their fullwater-schedule.
There are two 3' lines of air-tubing in each tank, and on top of that there's a pump mounted vertically so it "stirs" the mix at all times. Not to mention it is a recirculating NFT-system.
If I mix according to the schedule, using RO water (which is neutral in pH) the final mix is at pH 5.10, too low.
I use Hesi pH+ to raise the pH.
Temps are good, RH is good. There are no pests from what I can tell.
I can't think of anything else atm. PLEASE ask if there's anything you need to know.
Any please, any help and/or slightest advice is MORE than welcome!
Thanks!
Cheers,
ITTG
The only new addition to my setup, that would (I think) make a difference, is RO-water.
Pics:
For setup info see my diary.
They are about a month old, lights are 18/6.
They started out with an EC of about 0.8 and pH around 5.6. A little high, but I figured they would show signs of nute-burn if they thought it was too much. Which they did.
I emptied the tanks and put the EC at about 0.5, but it still didn't get any better and the pH started to fluctuate.
Emptied again and put the EC at 0.2 the pictures are taken after a week of EC 0.2. pH started to fluctuate even worse, going from 6 to 4 in one(!) day.
I've never had issues like this, and I have no idea whatsoever what to do. Like I said this is the first run with RO, but I'm not sure how having more pure water can be bad?
Nutes are Metrop and I use their fullwater-schedule.
There are two 3' lines of air-tubing in each tank, and on top of that there's a pump mounted vertically so it "stirs" the mix at all times. Not to mention it is a recirculating NFT-system.
If I mix according to the schedule, using RO water (which is neutral in pH) the final mix is at pH 5.10, too low.
I use Hesi pH+ to raise the pH.
Temps are good, RH is good. There are no pests from what I can tell.
I can't think of anything else atm. PLEASE ask if there's anything you need to know.
Any please, any help and/or slightest advice is MORE than welcome!
Thanks!
Cheers,
ITTG
Last edited: