-
As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.
Panda film or Thermo Ply???
- Thread starter hayday
- Start date
...yeah man, i don't know if this will be of any help to you but i share it on the off chance it might.
peace, bozo
btw, another option not listed here is Reflectix which is similar to mylar but stiffer and easier to work with, ...it's also much more durable than mylar.
--------------------------------------------------------------------------
Foylon:
A more durable version of mylar, made of spun polyester fabric and reinforced with foil laminate. Foylon is resistant to most solutions, won't tear or fade, and can be wiped or washed clean.
A great solution for growers who are interested in long term use, and though it may be slightly more expensive than mylar, its durability will more than make up for its cost. It has the ability to reflect about 95% of the light and approximately 85% of the heat energy, so a good ventilation system should be used in conjunction with folyon.
A recommended method to attach Foylon to the walls would be using Velcro, as it makes taking it down for cleaning much easier nd reduces the risk of tearing, creasing or bending it. If this is used for your walls, making sure you get it flush with the wall with no pockets of air between it and the wall to prevent hotspots.
Mylar:
A highly reflective polyester film that comes in varying thickness, the most common being 1 and 2 mm thick. The 2mm thick mylar while not quite as durable as the foylon, is fairly rugged. The 1mm thick mylar tears fairly easily, so taking it down for cleaning is quite difficult without damaging it in the process. Both types of mylar are able to reflect approximately 92-97% reflective, giving it the potential to be more reflective than foylon, but because foylon is more easily cleaned without damaging it as well as it being harder to crease, foylon usually ends up being slightly more reflective. Important to note is that mylar reflects radiant heat energy just as well as foylon (around 85%), so proper ventilation is necessary if mylar is used in your grow room. Attaching this to walls can be done in a similar fashion as foylon, and the same caution should be used to avoid creating hotspots in your room. The 1mm thick mylar stands a fair chance of being creased or ripped in the process unfortunately, even if Velcro is used to attach to the walls.
C3 anti-detection film:
A specialized type of mylar that exhibits the same properties as the 2mm thick mylar, but in addition to reflecting approximately 92-97% of the light, it also is 90% infrared proof, making your grow room all but invisible to IR scanning. This can also be attached in the same manner as foylon or mylar, and the same caution should be used to avoid creating hotspots in your room.
Flat white paint:
Self explanatory; a great option for large grow rooms or for people who are interested in a low maintenance wall. Flat white paint has the ability to reflect between 75-85% of the light, and does not create hotspots. Adding a fungicide is recommended when painting.
Glossy and eggshell whites not reflect light as efficiently as flat white. Semi-gloss paint for example, only has the ability to reflect between 55-60% of the light. Also important to remember when using paint is that any smears or blemishes on the surface take away from how reflective the wall is so care should be taken to avoid marking or staining the walls. Titanium white paint is very reflective; however it is usually only used on reflectors due to its high cost.
Elastomeric paint (info by furun):
A rubberized roofing paint with 90% reflection. Good for growboxes. Mildew resistant. Highly reflective.
Kool Seal White Elastomeric Roof Coating ~ $15.00 (1 Gallon)
Ultra high reflectivity
Forms a rubber-like blanket that expands and contracts
Adheres to almost any surface (very good on wood and metal)
Available @ Lowe's Home Improvement: Buy Kitchen Cabinets, Paint, Appliances & Flooring
White/Black plastic (also known as panda plastic or "poly"):
"Poly" is useful if you are setting up a temporary grow room or don’t want to damage the walls. Poly is easily cleaned.
The purpose of the black side is to not allow any light to pass through the plastic, which ensures your dark cycle remains dark. The white side is 75-90% reflective. Choose a 6 "mill" thickness of poly for maximum light blockage and duribility.
If this plastic is put too close to the light, you will obviously melt it so be careful!. Panda plastic does not create hotspots. Poly can be attached to the walls by using carpenter’s nails or using tape glue or similar means. This can be used as a cheap alternative to mylar if painting your grow room is out of the question.
Polystyrene Foam Sheeting (more commonly known as Styrofoam):
This is excellent for harsh environment growrooms (your attic for example), provided you have a good ventilation system and a way to keep the temperatures from rising too high (an a/c unit or similar) as it is an excellent insulator.
It is also a great material for use in a temporary setup or for use as a "travelling reflector" on a light mover, where weight is a concern. It is approximately 75-85% light reflective so it is comparable to using a flat white paint. Foam will not create hot spots. Rigid foam can be purchased in sheets, and can be used as a free standing wall or can be taped, glued or nailed to the wall, the last generally being the most successful method.
Emergency Blankets:
These are ultra thin polyester blankets that are sold in most camping stores and are constructed of a single layer of polyester film that is covered with a layer of vapor deposited aluminum.
It is not very effective at reflecting light because it is so thin. Holding it between you and a light source, many small holes are noticed at the intersections of creases and the entire blanket is translucent to begin with, this coupled with the many creases that are in it when you purchase it takes away a significant amount of it reflectivity. It is very easily creased as well which also detracts from its ability to reflect light. And while it is reflects nearly 90% of radiant heat energy, it is only able to reflect around 70% of the light.
The largest advantage of using this type of material is that it is very cheap and therefore easily replaced. Emergency blankets can create hotspots if not attached flush to the wall so it is important that no air gaps exist between it and your supporting wall. The easiest way to attach this is to use tape (Aluminum or metal tape is recommended), as it tears very easily once it is cut or punctured.
Aluminum Foil:
Aluminum foil is no more than 55% reflective - if used, make sure that the dull side is the one that is used to reflect the light. When it becomes creased its reflectivity is even lower (around 35%.) It is also very dangerous to use because it creates hotspots easily, is electrically conductive, and is a fire hazard when it is in close contact with HID lighting. Attaching this to walls is a pain and usually using aluminum tape or glue is the best way. This should only be used as a last resort, and even then its usefulness is[FONT="] questionable.[/FONT]
peace, bozo
btw, another option not listed here is Reflectix which is similar to mylar but stiffer and easier to work with, ...it's also much more durable than mylar.
--------------------------------------------------------------------------
Foylon:
A more durable version of mylar, made of spun polyester fabric and reinforced with foil laminate. Foylon is resistant to most solutions, won't tear or fade, and can be wiped or washed clean.
A great solution for growers who are interested in long term use, and though it may be slightly more expensive than mylar, its durability will more than make up for its cost. It has the ability to reflect about 95% of the light and approximately 85% of the heat energy, so a good ventilation system should be used in conjunction with folyon.
A recommended method to attach Foylon to the walls would be using Velcro, as it makes taking it down for cleaning much easier nd reduces the risk of tearing, creasing or bending it. If this is used for your walls, making sure you get it flush with the wall with no pockets of air between it and the wall to prevent hotspots.
Mylar:
A highly reflective polyester film that comes in varying thickness, the most common being 1 and 2 mm thick. The 2mm thick mylar while not quite as durable as the foylon, is fairly rugged. The 1mm thick mylar tears fairly easily, so taking it down for cleaning is quite difficult without damaging it in the process. Both types of mylar are able to reflect approximately 92-97% reflective, giving it the potential to be more reflective than foylon, but because foylon is more easily cleaned without damaging it as well as it being harder to crease, foylon usually ends up being slightly more reflective. Important to note is that mylar reflects radiant heat energy just as well as foylon (around 85%), so proper ventilation is necessary if mylar is used in your grow room. Attaching this to walls can be done in a similar fashion as foylon, and the same caution should be used to avoid creating hotspots in your room. The 1mm thick mylar stands a fair chance of being creased or ripped in the process unfortunately, even if Velcro is used to attach to the walls.
C3 anti-detection film:
A specialized type of mylar that exhibits the same properties as the 2mm thick mylar, but in addition to reflecting approximately 92-97% of the light, it also is 90% infrared proof, making your grow room all but invisible to IR scanning. This can also be attached in the same manner as foylon or mylar, and the same caution should be used to avoid creating hotspots in your room.
Flat white paint:
Self explanatory; a great option for large grow rooms or for people who are interested in a low maintenance wall. Flat white paint has the ability to reflect between 75-85% of the light, and does not create hotspots. Adding a fungicide is recommended when painting.
Glossy and eggshell whites not reflect light as efficiently as flat white. Semi-gloss paint for example, only has the ability to reflect between 55-60% of the light. Also important to remember when using paint is that any smears or blemishes on the surface take away from how reflective the wall is so care should be taken to avoid marking or staining the walls. Titanium white paint is very reflective; however it is usually only used on reflectors due to its high cost.
Elastomeric paint (info by furun):
A rubberized roofing paint with 90% reflection. Good for growboxes. Mildew resistant. Highly reflective.
Kool Seal White Elastomeric Roof Coating ~ $15.00 (1 Gallon)
Ultra high reflectivity
Forms a rubber-like blanket that expands and contracts
Adheres to almost any surface (very good on wood and metal)
Available @ Lowe's Home Improvement: Buy Kitchen Cabinets, Paint, Appliances & Flooring
White/Black plastic (also known as panda plastic or "poly"):
"Poly" is useful if you are setting up a temporary grow room or don’t want to damage the walls. Poly is easily cleaned.
The purpose of the black side is to not allow any light to pass through the plastic, which ensures your dark cycle remains dark. The white side is 75-90% reflective. Choose a 6 "mill" thickness of poly for maximum light blockage and duribility.
If this plastic is put too close to the light, you will obviously melt it so be careful!. Panda plastic does not create hotspots. Poly can be attached to the walls by using carpenter’s nails or using tape glue or similar means. This can be used as a cheap alternative to mylar if painting your grow room is out of the question.
Polystyrene Foam Sheeting (more commonly known as Styrofoam):
This is excellent for harsh environment growrooms (your attic for example), provided you have a good ventilation system and a way to keep the temperatures from rising too high (an a/c unit or similar) as it is an excellent insulator.
It is also a great material for use in a temporary setup or for use as a "travelling reflector" on a light mover, where weight is a concern. It is approximately 75-85% light reflective so it is comparable to using a flat white paint. Foam will not create hot spots. Rigid foam can be purchased in sheets, and can be used as a free standing wall or can be taped, glued or nailed to the wall, the last generally being the most successful method.
Emergency Blankets:
These are ultra thin polyester blankets that are sold in most camping stores and are constructed of a single layer of polyester film that is covered with a layer of vapor deposited aluminum.
It is not very effective at reflecting light because it is so thin. Holding it between you and a light source, many small holes are noticed at the intersections of creases and the entire blanket is translucent to begin with, this coupled with the many creases that are in it when you purchase it takes away a significant amount of it reflectivity. It is very easily creased as well which also detracts from its ability to reflect light. And while it is reflects nearly 90% of radiant heat energy, it is only able to reflect around 70% of the light.
The largest advantage of using this type of material is that it is very cheap and therefore easily replaced. Emergency blankets can create hotspots if not attached flush to the wall so it is important that no air gaps exist between it and your supporting wall. The easiest way to attach this is to use tape (Aluminum or metal tape is recommended), as it tears very easily once it is cut or punctured.
Aluminum Foil:
Aluminum foil is no more than 55% reflective - if used, make sure that the dull side is the one that is used to reflect the light. When it becomes creased its reflectivity is even lower (around 35%.) It is also very dangerous to use because it creates hotspots easily, is electrically conductive, and is a fire hazard when it is in close contact with HID lighting. Attaching this to walls is a pain and usually using aluminum tape or glue is the best way. This should only be used as a last resort, and even then its usefulness is[FONT="] questionable.[/FONT]
Yeah gnome, it's an o.s.b.chipboard panel with a foil face.I'm using it for walls and wrapping it with panda film.
Its inexpensive and a radient barier but I really want panda film for sealing everything tight.
I'm in the middle of cutting panel and very much torn on wheather to wrap them with panda film or just hang them.
This will be a long term perpetual vert room.4w x 7w x 7t.again...
Thank for the replies guys
Its inexpensive and a radient barier but I really want panda film for sealing everything tight.
I'm in the middle of cutting panel and very much torn on wheather to wrap them with panda film or just hang them.
This will be a long term perpetual vert room.4w x 7w x 7t.again...
Thank for the replies guys
D
DHF
Well.....If this is gonna be a perpetual Vert setup , I feel a responsibility to steer yas toward the best and ONLY 3 materials to use and pick from depending on budget and availability in your corner of the world.....Yeah gnome, it's an o.s.b.chipboard panel with a foil face.I'm using it for walls and wrapping it with panda film.
Its inexpensive and a radient barier but I really want panda film for sealing everything tight.
I'm in the middle of cutting panel and very much torn on wheather to wrap them with panda film or just hang them.
This will be a long term perpetual vert room.4w x 7w x 7t.again...
Thank for the replies guys
For 20 yrs the ONLY material worth it`s weight in gold like the dope I grew is reflectix on the walls AND ceilings to bounce lumens up , down , and ALL around the room , PLUS all the light that get`s PAST the plants gets bounced RIGHT back at em FTW.....but....
A new product with a better R-value insulation wise is "Prodex" from insulation4less.com , but it`s kinda pricey like reflectix but I`d say from the makeup will last even longer than reflectix and do just as well.....and lastly...
Orca film is proven more effective than EITHER of the 2 , but again kinda pricey and again worth every penny....No offense , but panda film and all those mylar and other foil products are shit...pure shit for grow areas....trust me....in fact....
If nothing else listen to Bozo`s post about flat paint , BUT make sure it`s "Ultra-Flat" white "mildewcidal" bathroom paint cuz even it kills compared to pandafilm and the foil products......and to stress lastly....
With bare bulbs , ceilings need covered just like the walls for optimum results......
My 2 cents from all them yrs....Good luck and.....
Peace....DHF....
....
I'm not familiar with an osb foil faced panel?
the thermoply we used long ago was basically a 1/4" thick 4x8 panel of pressed paper.
was actually used as a structural ext. wall panel instead of 1/2 plywood in the day.
it was ok unless water got to it, then it fell apart
as said above... prodex is DA BOMB!
I used it in my room everywhere, insulation value is R-16 @13/64" thickness
i used it w/2"-isofoam panels and my walls-n-ceiling are R-040 or better.
my 1st monthly bill for my AC to cool 6000w of lamps plus mag ballast fans in veg 18hrs a day etc etc
under $90
the thermoply we used long ago was basically a 1/4" thick 4x8 panel of pressed paper.
was actually used as a structural ext. wall panel instead of 1/2 plywood in the day.
it was ok unless water got to it, then it fell apart
as said above... prodex is DA BOMB!
I used it in my room everywhere, insulation value is R-16 @13/64" thickness
i used it w/2"-isofoam panels and my walls-n-ceiling are R-040 or better.
my 1st monthly bill for my AC to cool 6000w of lamps plus mag ballast fans in veg 18hrs a day etc etc
under $90
D
DHF
Gus.....No offense but there`s waaaay cheaper products to seal rooms with than bullshit pandafilm @75 cents a linear ft.....
It has little to NO reflectivity/diffusion/dispersion properties other than just being "white".....now...Proof`s in the pudding , so ANYONE that wants ta know how much reflectivity ANY surface has , go get a digital light meter and see what`s happenin BEHIND the plants once the light gets past em and hits said pandafilm or ANY product used for that matter....
It`s not a pretty sight since ALL it does is absorb the lumens and eat em with NO benefit back to the plants....bet on it....been there done that 20 yrs ago....
Peace....DHF.....
....budshoteyes
Member
Reflctix is all I use in my rooms...and the insulating qualities are a bonus,to keep heat in or out!
ProMixNSunshine
Member
I was a little worried reflectix wasn't going to be on your list for a brief second, because you've never steered me wrong.
Stuff is the shlt compared to panda plastic, pp is so flimsy & typically comes with way more than is needed so the price isn't that much better in the end. Way easier to work with + small insulation benefit, plus unlike r-board (esp. type with the little foil coating) I find it holds up to water really well.
On a side note, how the hell do you cut the really thick foam board (like 1.5" & 2" stuff) Without making a mess. Better yet, how do you trim a **** hair off of it without making things way worse, I know there has to be a trick to it........ special tool.......? Don't say a fresh blade I'll kill you.
i use a 7" circular saw and/or table saw.
gives a clean cut.
for some of the thinner stuff for specialty cuts i use a breakaway blade razor knife
The best tool for cuting foam is an old handsaw.You can't really trim a **** hair off but the board gets cut and the mess gets cleaned up.
A large serrated kitchen knife works well too.
I'm pretty sure for my task,I'll finish hanging the panels,radiant barrier in,caulk and seal,paint with flat white microbial paint.
Then I can get my light back on and get back to my hobby.I really miss tending plants every day.At a later date I will add reflectix.
Thank for all the help...
Hey gus Thermo ply is $10.00 a sheet so it was about as cheap as any other sheathing.Plus it had a barrier so it was most cost effective.I was going to wrap the panels with the panda but now I will just mothball the stuff and use it for another place down the road sometime.
Thanks for helping gus
D
DHF
Hey Bro...Do the best yas can with whatchas haveta work with , and upgrade as budget permits...
Just remember ta cover ceilings too with bare bulbs and you`ll guaranteed see improved bottom line results down the road.....
I ran the ultra flat white mildewcidal paint with my krusty buckets and excellent results for almost a decade , but once Heath Robinson showed me what reflectix was capable of , the next decade of ALL my rooms were covered with it ....and I mean EVERYTHING that wasn`t green had it FTW....anyways
Good luck...DHF.........
Just remember ta cover ceilings too with bare bulbs and you`ll guaranteed see improved bottom line results down the road.....
I ran the ultra flat white mildewcidal paint with my krusty buckets and excellent results for almost a decade , but once Heath Robinson showed me what reflectix was capable of , the next decade of ALL my rooms were covered with it ....and I mean EVERYTHING that wasn`t green had it FTW....anyways
Good luck...DHF....
.....
My tent is made of reflectix. It is super sized TBH. It get's really HOT in the tent. Make sure that you can move that hot air.
R.Fortune
R.Fortune
reflectix or tek foil from farmtek. can be gotten in 6 ft wide rolls too. don't forget foil tape too seal it up tight
Harbor freight has electric hot knife that works with no foam beads all over. It does burn the cut so do it outside. Can cut up to 5-6 in thick esp foam boards quick! I trimmed 1 1/2" and 2" thick 1 1/2 off each sheet. Duct holes too. It seals the cut in the foam which is very beneficial for the foam doesn't shed without tape.
