What's new
  • ICMag with help from Phlizon, Landrace Warden and The Vault is running a NEW contest for Christmas! You can check it here. Prizes are: full spectrum led light, seeds & forum premium access. Come join in!

Panconqueso's Micro Grow

Panconqueso

Active member
Veteran
Hi friends

I've been around for a long time, reading and learning mostly. I have always been a micro-grower and I've been working with the same mini closet for the last 11 years, sometimes supported by a PC cabinet for mothers and clones and other times using the mini closet for the whole process from seeds.

I share some pics from previous grows using a 70w hps (scrog) and most recent ones using LST and a 150w hps. By the way, the mini closet measures 40cm deep x 40cm wide x 60cm high (15.7 x 15.7 x 23.6 inches), passive intake and active extraction (4 inches) no filter.


























This time I will try a new scrog but using a 120w LED QB Full Spectrum SAMSUNG LM301H 3500K + 5000K + 660nm + IR + UV with a XLG Mean Well driver at 40% for growing stage. I´m just starting this new grow so in the past few week i've been preparing the only survivor from three seeds, strain unknown (probably a barney's farm seed, not sure).














I'll try to update weekly

Cheers!
 

Attachments

  • photo2081727.jpg
    photo2081727.jpg
    51.7 KB · Views: 182
  • fetch?photoid=17973675.jpg
    fetch?photoid=17973675.jpg
    89.5 KB · Views: 202
  • fetch?photoid=17976293.jpg
    fetch?photoid=17976293.jpg
    44.3 KB · Views: 195
Last edited:

Panconqueso

Active member
Veteran
Hey Sampas92 welcome!

I've been having lot of troubles trying to post old pictures, don't know why but after a while they just disappear. I would be much greatful if anyone can point me out on how to proceed or were i can find the propper information.

Cheers
 

Panconqueso

Active member
Veteran
Yesterday was the day and I was finally able to finish the scrog mesh. The general idea was to integrate the new textile pot with the mesh which btw is made of PVC and nylon thread and about 15x15 inches.

fetch?photoid=17979195.jpg


To make the mesh i've use little eye bolts

fetch?photoid=17979194.jpg


fetch?photoid=17979201.jpg


fetch?photoid=17979197.jpg


then I've remove the mesh in order to repot

fetch?photoid=17979196.jpg


and then i've re install the mesh and begin the scrog training

fetch?photoid=17979199.jpg


fetch?photoid=17979200.jpg


See ya
 

Panconqueso

Active member
Veteran
Hi mates

flipped to 12/12 today after a major defoliation. Hope this will help me to control plant height and ensure light penetration.
fetch?photoid=17984461.jpg


fetch?photoid=17984462.jpg


for the next three weeks the QB will be at 60%

Cheers
 

Attachments

  • fetch?photoid=17984461.jpg
    fetch?photoid=17984461.jpg
    116.2 KB · Views: 107

Creeperpark

Well-known member
Mentor
Veteran
Friend, what are you feeding your plant and how much if you don't mind me asking.? She's looking good!!😎
 

Panconqueso

Active member
Veteran
Hi mates thanks for stopping by!

bsgospel you're absolutely right, it really looks like it hahahah

Creeperpark, I am using a variety of products but applying small doses of each depending on the stage: terra vega (Canna) 2ml/L (veg and blooom) and terra flores (canna) 2,5ml/L (bloom), plus blossom blaster (grotek) 0,1g/L; Monster Bloom (grotek) 0,5g/L and delta 9 (Cannabiogen) 2ml/L every other watering.

EV3R, thanks for your kind words! I really like your scrog too, trully amazing

fetch?photoid=17989276.jpg


fetch?photoid=17989275.jpg


Cheers!
 

Creeperpark

Well-known member
Mentor
Veteran
That plant looks really healthy and happy in the photo above. She's coming right along. You may have to do something to the branch on the left because it looks like it going to jump ahead of the others. 😎
 
Top