Noob stealth Dresser!!! PICS

[Orga_Nerd]

So i have been working on this cab for a month i think now. I am a slow mover.
But anyway i have the mother/clone room almost ready, just needs lights put back up.
The dimensions of the entire space are 39w/29h/19deep.
I plan on buying a pc fan with high cfm. like around 100cfm. And possibly two.
I have big bud seeds coming.

And that is all for now, i have to go to work.

 

[Orga_Nerd]

Here are the pics of my progress so far.

 

[FunkBomb]

Very nice work so far. What are your plans for veg/flower lighting? I have to suggest some 2ft flouro tubes for the veg side. Those 100 CFM fans just so you know are a little noisy. You may increase your stealth by using 120/150 mm PC fans and wiring them up to some 12V chargers. You can get good mixed airlow for less noise and money. Best of luck

-Funk

 

[phirstaide]

nice lil setup you got there. what kind of lighting do you plan on using? i have a dresser similiar to that and i use a 150w hps in it. anyhow, good luck w/ur grow.

 

[DIGITALHIPPY]

some 'noob' that shit looks good!
been doing alot of homework on this, it shows. good work, keep it up.

 

[Wonderon]

Def, tagging this one. Looks good so far, very interested to see how you finish it off. Good luck.

 

[FRIENDinDEED]

DAMN FINE JOB!!! i have to agree though "noob"?<---. your a novice at best , especially considering you have obviously done your homework.

only thing is, you may want to clean/cut those glue spots where it spilled over, right under those top drawers, thats a dead giveaway for snoopers and the like. i say that, cause i tend to forget things like that,

also be careful with those slots where the drawer bottoms used to be, definite den for pests, maybe some white duct tape would be an easy solution

 

[JustEnoughForMe]

this is a thing of beauty ... far nicer than my first box (or my first grow, in a windowsill : )

 

[sniffs]

Looking good so far! Looks like it's going to turn out to be very very stealthy keep it up !

 

[Orga_Nerd]

Funk= Thanks for the advice buddy. I am going to use all cfl's i believe. I have 3x23w daylights in the mother/clone room and there will be 10 23w warm whites in flower room. At a Radioshack they sell 1.5-12v adjustable power chargers. So i was thinking when i need it silent i can just turn it way down. What do you think? good idea, bad idea? But i will use pc fans.

phirstaide= Thank you! Got any pics of your cab?

I found some really powerful magnets at radioshack to hold the doors shut. I still am not sure how i will rig them up.

 

[phr3d0m2gr0]

Looking good. i would definitely recommend 150w HPS. The buds are noticeably denser and thicker. What are your flower room dimensions?

 

[Orga_Nerd]

DAMN FINE JOB!!! i have to agree though "noob"?<---. your a novice at best , especially considering you have obviously done your homework.

only thing is, you may want to clean/cut those glue spots where it spilled over, right under those top drawers, thats a dead giveaway for snoopers and the like. i say that, cause i tend to forget things like that,

also be careful with those slots where the drawer bottoms used to be, definite den for pests, maybe some white duct tape would be an easy solution

Thanks for the advice! i have been meaning to even up those glue runs. It did it a lot worse when i first took the drawers off. That glue is just from that little electrical area i put over the mother/clone room.


I just realized how many people responded today! Thanks for all the kind words everyone!
This will be my first cab and this has taken my a month=noob. And soon my first grow. I just had four bagseeds pop a root!

 

[phr3d0m2gr0]

Oh yeah what are your plans for growing medium and nutrients?

 

[Orga_Nerd]

Looking good. i would definitely recommend 150w HPS. The buds are noticeably denser and thicker. What are your flower room dimensions?

Thanks for the help! The flower room is 26w/29h/19d.
I'm going to make this a perpetual grow. With those dimensions i plan to have 16 girls flowering, harvested 2 each week. So i will be mounting CFL's in a graduated manner to accommodate varying height. I really like the idea of a 150w hps though if i do anything else it will be that.

 

[Orga_Nerd]

Ripple: Don't apologize it made me laugh. If you are on this site very much i am sure you are very knowledgeable now. I hope you can give it another go soon! Thanks for stopping by.

phr3d0m2gr0: I plan on going soil. And i am not really sure about nutrients. I would love some recommendations if you have any. But i think soil is almost a for sure thing.

Anyone else have some advice for nutrients.

 

[GrassRoots]

I'd recommend painting the inside of the air intake tubes flat black, otherwise it looks awesome! Best of luck to you on your grow.

 

[sniffs]

Yeah I would also definitely put a 150 watt HPS in there. You will see a big difference in the buds with that instead of just all CFL's! Keep up the good work and good luck!

 

[Orga_Nerd]

Ok so im going to order these 110cfm pc fans from newegg and put them in the door of the flower room. Does anyone have any advice on cutting these holes/squares for the pc fan?

I found an ac power adapter that goes from 1.5v to 12v with alot of others in between. so i can adjust the fan speed to match my needs.

Thanks grassroots i will def. do that.

I hope all this comes together real soon b/c its getting dry around here.

 

[phr3d0m2gr0]

Soil is definitely the way to go. I would recommend any organic nutrients just make sure you get higher N for veg and higher P and K for flower.

For cutting a circular hole try a hole saw that goes on a drill, or just trace the hole you need and drill small holes around the line and sand it down.

 

[Orga_Nerd]

thanks freedom, i appreciate the help